a qty of various items incl. an old industrial table, hose, a Packer strapping machine, an electric drill with pneumatic advance (no head), flat p...

a qty of various sheet material incl. Perspex, Palsun, acrylic etc

3 racks containing a qty of various type rolls of edge banding

1 pallet containing 14 sheets of slat wall white Melamine display boards & a qty of various slide inserts

2 wooden racks containing a qty of various items incl. a large qty of slide inserts for slat wall display boards

1 bay of boltless stores type racking containing a qty of various items incl. a large qty of drawer runners, edge protectors etc.

a qty of grey metal stores type racking and all contents. The contents include a wide range of items incl. wheels, dowels, wire, tubs etc. The rac...

1 warehouse packaging type bench, 2 grey two door storage cabinets & 2 pine cabinets. All contents of cabinets are included and comprise of packag...

3 grey metal two door storage cabinets and all contents. The contents include a wide range of various screws, fixings, nails etc

1 pallet containing a qty of plastic end caps, 1 pallet containing a qty of polystyrene boards & 1 large tube containing red solid surface material

1 blue metal framed warehouse bench & 2 tables

1 bay of boltless pallet racking and all contents. The contents include a wide range of various laminates etc ...[more]

1 edge flaming machine for acrylics polishing, 2 air acetylene polishing torches & 1 clean up bench ...[more]

1 Acrylics bending Table, 1 work bench & several formers ...[more]

1 wooden rack and all contents. The contents include a wide range of various laminates etc and includes the rolls stood on their ends in front

a qty of various items incl. grey metal boltless stores type racking, edge protectors, 2 grey 3 drawer filing cabinets, Perspex tubes etc ...[mor...

1 large green metal rack and all contents & 1 pallet containing various sheet material incl. Colour core Formica, Dibond aluminium surfaced etc

a large qty of various flat packed cardboard sleeve boxes incl. 2 full pallets & a qty of made up lids

1 set of pallet trucks. The buyer will need to leave these pallet trucks on site for at least a week following the auction to assist in clearing

1 metal mesh open back gas bottle store with 2 front opening mesh doors. This item can be viewed outside the rear of the building and is slightly ...

1 green metal dry back spray booth approx 1800wide x 2000high currently not installed & 1 red metal rack. These items can be viewed outside the re...

Withdrawn....Please do not bid.....a large dust extraction system by A1. Main Factory Extraction Plant. 10000cfm 30 kW. Automatic pulse jet clean...

a red metal shipping container and any remaining contents. Size approx 12.2m x 2.4m. This item can be viewed outside on the side of the building.

2 metal racks & 1 table frame. These items can be viewed outside on the side of the building. ...[more]

The entire remaining contents of the paint store building which can be viewed outside the rear of the building comprising of a large qty of variou...

1 red painted metal access cage with fork lift channel below and supplied with two Silverline harnesses & energy absorbing lanyards. The buyer wil...

1 metal bench containing a small vice & a Sweeny / Blocksidge fly press with over arm, 1 weight & 1 punch press for piano hinges ...[more]

2 small roller conveyor units & 1 metal stillage with contents

The main factory compressed air system which comprises of 1 HPC compressor model SK21SCB, 12152 hours, (serviced 11/09/2015 at 11812 hours), 1 De...

1 red metal mezzanine floor. This floor uses large red metal RSJs to span the building from side to side using red metal support columns but each ...

1 Kremlin Airmix Paint Spraying Pump on wheeled stand, no model visible

a qty of various spray shop related equipment incl. 2 tables, a pneumatic mixing drill, steps etc

1 Dryback paint spray booth approx 3400mm x 3000mm. The buyer of this booth may be required to provide a risk assessment before dismantling can st...

a qty of various spray shop related items incl. a Solutex automatic spraygun washer, model ART.173-C Air powered, 2 cupboards etc (all items situa...

4 metal personnel lockers (incl. any remaining contents), 2 built paint drying mobile racks & 2 other racks (behind in corner & will require build...

1 Formeco solvent recovery distiller model D12AX, 12 litre capacity 240v & 1 similar unit which requires attention

3 paint drying mobile racks

4 paint drying mobile racks

4 paint drying mobile racks

1 Graco Airmix paint spraying pump. Stainless steel type pump suitable for low volumes, mounted on a trolley / backboard ...[more]

3 air mix spray guns comprising 2 x Kremlin & 1 x Graco

1 paint spraying gun by Kremlin type M21 & 1 small pot

5 various paint spraying guns by Kestrel & 3 pots

1 Binks 5L Pressure Pot Paint (Partially refurbished)

1 Dryback paint spray booth approx 3400mm x 3000mm. The buyer of this booth may be required to provide a risk assessment before dismantling can st...

1 Ambi Rad Propane Radiant Tube Overhead Heater, model AR22SL, 6000mm long straight tube, 22 kW, Serial No: UK951144203 with wall mounted thermost...

1 Hydrovane Compressor, model: 08808-000, 15 kW. Hour meter reads 15861 hours. Serial No: 89025HV827318/12. This is the stand by factory backup ma...

a qty of Palsun Polycarbonate sheets (leaning up against wall behind the sanding booth)

1 Indusvent sanding booth, no model visible, 3ph, table size approx 2500mm x 800mm with extraction underneath and the rear wall to self contained ...

1 red metal vertical sheet storage rack & all contents. The contents incl. MDF, worktop etc. This lot also includes the stack of board on the left...

2 metal vertical sheet storage racks & all contents. The contents incl. oak, pine, other hard & soft woods etc. This lot also includes the metal a...

1 dowel borer by Construzione Machine Leguno, 3ph / air & a qty of various accessories. This machine has 27 spindles and can be used either verti...

1 heavy duty router by Interwood Router, 3ph currently mounted in a Sagar spindle moulder chassis

1 Elu flip over site chop / table saw, 10 inch blade, 240v

1 Bobbin Sander, 3ph, no make / model visible ...[more]

1 Galli linisher / edge sander with adjustable table, 3ph, oscillating sanding face approx 2100mm x 270mm & supplied with several unused belts

2 wooden picnic type tables

1 Wadkin floor standing pillar drill, treadle or handle operated, 3ph Serial No: W27.

1 wooden work bench with 6 clamps on top which are all included

1 wooden work bench with 2 clamps on top which are both included ...[more]