Bekosplit 13 Oil Water Separator (please note there is a lift out fee of £20 plus VAT on this lot)

Abbott vertical Air Receiver, serial number A29211, year 1981, 3.3ft diameter x 6.6ft high (please note there is a lift out fee of £20 plus VAT on...

Abbott vertical Air Receiver, serial number A29212, year 1981, 3.3ft diameter x 6.6ft high (please note there is a lift out fee of £20 plus VAT on...

Compair Broomwade SmartAir 3 Sequencer Compressed Air Management Unit (please note there is a lift out fee of £10 plus VAT on this lot)

Atlas Copco FD750VSD Compressed Air Dryer, serial number APF139822, Motor 3.8Kw, 400v 3ph 50hz, Weight 430Kg, Year 2008 (please note there is a li...

Compair CF0600B Filter, serial number 4G/1251, year 1997 and Compair CF0600C Filter, serial number 4G/1260, year 1997 (please note there is a lift...

Caterpillar D398 Tamper Synchronous Generator - KVA 575, KW 460, RPM 1000, Volts 460, Amps 722, Code No 360-298-301, Field amps 54.2, Type SG-1445...

Chapee Arizona 1100 oil fired Boiler, serial number 9917125527, year 1999, with Weishaupt Monarch burner (PN100) (please note the purchaser is res...

Riverside RWM75 vertical single cylinder Waste Baler, serial number MF6187, year 2008, Weight 270Kg (please note there is a lift out fee of £10 pl...

Steel Welding Bench, 1840mm x 910mm, with 6in engineers vice (located in engineering) (please note there is a lift out fee of £5 plus VAT on this ...

Nederman Extraction Fan, flexible arm and flexible ducting (located in engineering) (please note there is a lift out fee of £20 plus VAT on this l...

Nederman Extraction Fan and flexible arm (located in engineering) (please note there is a lift out fee of £20 plus VAT on this lot)

Oxyacetylene Cutting Torches and trolley (bottles are not included) (located in engineering) (please note there is a lift out fee of £5 plus VAT o...

F.J. Edwards Besco-Truecut Guillotine, 72in wide (located in engineering) (please note the purchaser is responsible for dismantling and removal of...

Binns & Berry gap bed Centre Lathe, 32in swing, 192in bed length, with 3-jaw chuck, tailstock, tool post, grinding head, 2 steadies, travelling st...

Konecranes overhead Lifting Gantry Type XMSL, 630kg swl, comprising 2 suspended length runways, 6800mm long, crossbeam 2650mm wide, with manual ru...

Steel fabricated Lifting Beam, 1850mm wide, 650kg swl (HA1417) (located in engineering) (please note there is a lift out fee of £5 plus VAT on thi...

TB gap bed Centre Lathe, 24in swing, 120in bed length, with 4-jaw chuck, tailstock, tool post, Mitutoyo dro (located in engineering) (please note ...

Newall ELA cylindrical Grinder, serial number 68-ELA-2496-VQ-2014, table 145in x 17in (located in engineering) (please note the purchaser is respo...

Overhead Lifting Installation comprising 2 suspended length runways, 15.8m long, crossbeam approx. 5700mm wide with manual runners and Stahl 650kg...

Lifting Beam, 650kg swl, 2300mm wide (HA0394) (located in engineering) (please note there is a lift out fee of £5 plus VAT on this lot)

Heavy steel Setting Bench, 2660mm long (located in engineering) (please note there is a lift out fee of £10 plus VAT on this lot)

Lands-Light Co M.1 Light, serial number 4204, 110volts and stand (located in engineering) (please note there is a lift out fee of £5 plus VAT on t...

Lifting Gantry, 500kg swl comprising 2 uprights, crossbeam 5400mm wide, with runway approx. 1800mm long and manual runner (HA0248) (located in eng...

4 various Grinding Wheels, 12in diameter bore (located in engineering) (please note there is a lift out fee of £5 plus VAT on this lot)

3-jaw Chuck, 12in diameter, 4-jaw Chuck 24in diameter, 3-jaw Chuck 18in diameter and Steady, as lotted (located in engineering) (please note there...

Granite Surface Table, 920mm x 920mm, and stand (located in engineering) (please note there is a lift out fee of £5 plus VAT on this lot)

Siat hand operated battery Strapping Unit and Strapping Trolley (located in engineering) (please note there is a lift out fee of £5 plus VAT on th...

Suspended Lifting Beam, 250kg swl, 8000mm long, with ARO 77 17E ¼ton pneumatic chain block and manual runner (HA0340) (located in engineering) (pl...

Townson & Mercer Laboratory Oven, serial number 840303 (located in laboratory) (please note there is a lift out fee of £5 plus VAT on this lot) ....

LTE Swallow Laboratory Oven, serial number J1803/2 (located in laboratory) (please note there is a lift out fee of £5 plus VAT on this lot)

Agfa/Glunz & Jensen Azura C120 Plate Processor, serial number 92699-0072, year 2005 (located in laboratory) (please note there is a lift out fee o...

Agfa Gevaert Lithostar LP82 Ultra type 5902 Plate Processor (please note there is a lift out fee of £20 plus VAT on this lot)

Richards plastic double section Sink Unit, 3180mm wide (located in laboratory) (please note there is a lift out fee of £20 plus VAT on this lot)

RS 541-309 benchtop Press, serial number 12751 (located in laboratory) (please note there is a lift out fee of £5 plus VAT on this lot)

Speakman Emergency Shower and Eyewash Station (located in laboratory) (please note there is a lift out fee of £20 plus VAT on this lot)

Clifton Hotplate, serial number 24975, 685mm x 308mm, unused (located in laboratory) (please note there is a lift out fee of £2 plus VAT on this l...

Perkin Elmer Lambda 35 UV/VIS Spectrometer (located in side laboratory) (please note there is a lift out fee of £2 plus VAT on this lot)

RS 541-309 benchtop Press, serial number 12759 (located in side laboratory) (please note there is a lift out fee of £2 plus VAT on this lot)

Palintest Turbimeter (located in laboratory) (please note there is a lift out fee of £2 plus VAT on this lot)

Hach Chlorine Pocket Colorimeter II (located in laboratory) (please note there is a lift out fee of £2 plus VAT on this lot)

Clifton Hotplate, serial number 43916, 18in x 12in (located in laboratory) (please note there is a lift out fee of £2 plus VAT on this lot)

Schott KL1500-T Cold Light Source (located in laboratory) (please note there is a lift out fee of £2 plus VAT on this lot)

Photonic PL3000 Cold Light Illuminator (located in laboratory) (please note there is a lift out fee of £2 plus VAT on this lot)

4 Fume Cupboards, 1150mm wide (FC35, 36, 37, and 38) (located in laboratory) (please note the purchaser is responsible for dismantling and removal...

Wet back Fume Cupboard, 1200mm wide, with water tank and pump (FC38A) (located in laboratory) (please note the purchaser is responsible for disman...

Printing Plate Coating Centrifuge/Whirler, 980mm diameter (located in laboratory) (please note there is a lift out fee of £10 plus VAT on this lot)

Dust Extraction Ltd 8M Dust Extraction Unit, serial number 0521 40301, year 2005, with automatic shaking (please note there is a lift out fee of £...

Double side mobile double door Cabinet (please note there is a lift out fee of £5 plus VAT on this lot)

Double side mobile double door Cabinet (please note there is a lift out fee of £5 plus VAT on this lot)

Mitutoyo granite Surface Table and stand, 1830mm x 920mm, with covers (please note there is a lift out fee of £5 plus VAT on this lot)

Dust Extraction Ltd 25M Dust Extraction Unit, serial number 0621 44901, year 2006, with automatic shaking, 2 galvanised steel extraction hoods and...

Hughes Emergency Eyewash Station (please note there is a lift out fee of £5 plus VAT on this lot)

Amada Promecam ITS2 Pressbrake, serial number ITS2 5020 B30907, year 1993, 500kN, 100mm max stroke, 2000mm wide, c/w Amada Promecam Operateur cont...

Babcock Type 15PG gas fired Boiler, S/N 17897, year 1993, Volume 2100 litres, Max pressure 6 bar (PN85) c/w NuWay Gas Burner, year 2012 (please no...

Boss Expansion Vessel, 800litres, 6bar (please note there is a lift out fee of £20 plus VAT on this lot)

EPS Boiler Pressurisation Unit (please note there is a lift out fee of £20 plus VAT on this lot)

Alfa Laval Heat Exchanger (please note there is a lift out fee of £20 plus VAT on this lot)

Nederman retractable Hose and Reel (please note there is a lift out fee of £2 plus VAT on this lot)

Pump Set - KSB Etanorm G150-315 G7, S/N 7-917-293356, 570m3/hr @ 22.5m hd, Year 1994, Motor ABB M3BP 225 SMB4, 45kw, 1480rpm, IP55, IE3, year 2015...