Refine your search
Filtered by:
- Show only bulk lots
- List
- Grid
-
795 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any enquiries.
All lots are sold as seen and where lying. It is assumed that all bidders have viewed lots to their satisfaction prior to bidding. No allowance of...
FB Lehman FM20 18.3 litre cap AGITATOR BALL MILL, with commissioning parts & manual, serial no. 010888, plant no. unknown, year of manufacture 199...
SACK FEED CONVEYOR SYSTEM, all 500mm wide, belt consists off 5 units, incline, rotator / turner, settler, flattener and out feed. Equipment will b...
Adpak GEMINI GSP FLOW WRAPPER, vendor comments - with full recent refurb by Adpak 240 volts, tested with four spare folding boxers, chain pushers,...
Spiroflow Unit with extra receiver (tank), 3 phase, 4m x 65mm ID tube, used for corn snacks to empty sacks then feed to another Spiroflow holding ...
Stainless Steel 45 gallon Barrel Turner Unit, 3 phase, rubber wheels, £20 charge to load onto purchaser’s transport, lot located in Chester (ref 4)
Hayseen Sandiacre SWAN NECK FEED CONVEYOR, serial no. 1075-278, 5m high, formerly a feed to mutibagger, modular belt 700mm wide, 600mm usable, 50m...
Transnorm TS 1600-105 FH2 90 degree Corner Belt Conveyor, aluminium cased, 1200mm wide belt, 3 phase, year of manufacture 2016, £50 charge to load...
Transnorm 1600-105 90 degree Belt Conveyor, serial no. B1682480, aluminium cased, 900mm wide, year of manufacture 2016, £50 charge to load onto pu...
Transnorm TS 1600-105 90 degrees Belt Conveyor, aluminium cased, 600mm wide, year of manufacture 2005, £50 charge to load onto purchaser’s transpo...
TROMMEL SEPARATOR SCREEN, approx. 1.5m dia. x 4.5m long on body of trommel screen, with 500mm wide chevron belt discharge, 600mm wide trough belt ...
TWO SPEED PELLETING PRESS, (understood to be manufactured by CPM), with electric motor, die as fitted and steel stand, (ref – 5) Lot located in Sp...
Street A1 3.2 Ton Overhead Travelling Crane, serial no. 1235701, year of manufacture 2006, dimensions approx. 11m span x 12m gantry length (fully ...
DMN Westinghouse AML300/4TS Rotary Air Seal. Free loading Yes, item located Wrexham, vendors comments - New never used £6000 to buy new, cast iron...
Buhler MPSK-28/30-LPTK1 Rotary Air Seal, loaded free of charge yes, located Wrexham, vendors comments- Used but refurbished, this unit is suitable...
Stainless Steel Receiving Dust Filter Unit Pod, body dia. 760mm, bottom cone height 430mm, inlet section height 200mm, body section 1000mm, top se...
Sunpack/Xutian XT4503 Demo 250-300% Power Pre-Stretch Pallet Wrapper, 1650mm turntable, serial no. 11122221 year of manufacture 2011, dimensions a...
Sunpack/Xutian XT4510 Demo 250-300% Power Pre-Stretch Robo Pallet Wrapper, with folding mast and self-contained charger, serial no. 12072432 year ...
Sunpack/Xutian XT551 Demo Top and Bottom Case Sealer, with side belts operation, dimensions approx. 1.9m long x 1.55m high x 0.75m wide, free load...
Sunpack/Xutian SQ6 Demo Fast Fully Automatic Strapping Machine, dimensions approx. 1.4m long x 1.42m high x 0.62m wide, free loading onto purchase...
Ten x Sunpack/Xutian C306 PP/PET Strapping Tensioner and Sealers (for pallets and parcels), dimensions approx. 0.51m long x 0.13m high x 0.05m wid...
Ten x Sunpack/Xutian B311 PP/PET Strapping Tensioner and Sealers (for pallets and parcels), dimensions approx. 0.28m long x 0.075m high x 0.15m wi...
Sunpack/Xutian WK01-30 Demo Desktop Automatic Banding Machine, with foot pedal, dimensions approx. 0.6m long x 0.5m high x 0.35m wide, free loadin...
DCE Unimaster Dust Filter Unit, loading free of charge - yes, item located in The Bridgwater, Somerset ...[more]
One Tonne Chain Block, loading free of charge - yes, item located in The Bridgwater, Somerset ...[more]
Demag 550kg Electric Chain Hoist, loading free of charge - yes, item located in The Bridgwater, Somerset ...[more]
Loadstar Two Tonne Electric Chain Hoist, loading free of charge - yes, item located in The Bridgwater, Somerset ...[more]
Three Electro Pneumatic Slides, dimensions approx. 430mm x 430mm, loading free of charge - yes, item located in The Bridgwater, Somerset
Avery 3205ABA Sliding Weight Head Stock Platform Weighing Machine, 210kg, serial no. S-570311, loading free of charge - yes, item located in The B...
Vitalair 1500mm wide Horizontal Laminar Flow Bench Unit (single pass system), ref. no. V/741/97/01, year of manufacture 1997, 240V, with Hepa filt...
Riello RL 250 MZ Oil Fired Burner, serial no. 02396005032 (understood to be installed new in 2017), with control panel, loading free of charge - y...
DCE Unimaster Dust Filter Unit, loading free of charge - yes, item located in The Bridgwater, Somerset (2)
Carier 250mm Part Taper Screw Hopper Discharge Conveyor, approx. 2m long, with geared electric motor and one discharge outlet, dismantling and loa...
Carier 250mm Part Taper Screw Hopper Discharge Conveyor, approx. 2m long, with geared electric motor and one discharge outlet, dismantling and loa...
Carier 250mm Part Taper Screw Hopper Discharge Conveyor, approx. 2m long, with geared electric motor and one discharge outlet, dismantling and loa...
Carier 250mm Part Taper Screw Hopper Discharge Conveyor, approx. 2m long, with geared electric motor and one discharge outlet, loading free of cha...
Carier 250mm Part Taper Screw Hopper Discharge Conveyor, approx. 2m long, with geared electric motor and one discharge outlet, dismantling and loa...
Taper Discharge Conveyor, approx. 300mm x 2.8m, with mixing system and extra scroll, loading charge - £50, item located in The Bridgwater, Somerse...
16 Compartment x 5/10 tonne (Meal cap.) Bolted Section Steel Blending Bin, approx. 12m x 5.5m x 7.7m deep overall, dismantling and loading onto pu...
Four Rowlands x Two Compartment x 13 tonne (nut cap.) Bulk Outloading Bin Complex, approx. 10m x 3.2m x 5.5m deep overall, each with rack and pini...
Two Solid Rubber Fork Truck Tyres, each 6.50 - 10, loading free of charge - yes, item located in The Bridgwater, Somerset ...[more]
Dustcheck SFKJC9-4 Dust Control Unit, plant no. 50, year of manufacture 2015, dimensions approx. 1m x 1m x 2.4m high, loading charge - £50, item l...
Bonfiglioli Product Pump - Lacerator, plant no. 51, dimensions approx. 1.5m x 0.6m x 2m high, loading charge - £50, item located in Bury St Edmund...
Powder Grinder/ Pump, plant no. 52, dimensions approx. 0.8m x 0.5m x 1m high, loading charge - £30, item located in Bury St Edmunds, Suffolk, vend...
Endoline 221 Box Taper/ Erector, plant no. 53, dimensions approx. 2m x 2.2m x 2.2m high, loading charge - £50, item located in Bury St Edmunds, Su...
SDMO J66K0709753 66kVA Generator, with John Deere engine, plant no. 54, dimensions approx. 2.2m x 1m x 1.5m high, loading charge -£50, item locate...
CFS High Sided Conveyor, dimensions approx. 300mm wide belt, 2m x 0.7m wide x 1.9m high, loading charge - £30, item located in Bury St Edmunds, Su...
Bin/ Box Tipper, plant no. 56, dimensions approx. 1.4m wide x 1.6m long x 1.8m high, 2m x 1.8m x 3.4m high overall, capacity 1500kg, loading charg...
Applied Weighing Powder Weigher, with screw in-feed, plant no. 57, dimensions approx. 1.2m x 1.2m x 2m high, loading charge - £50, item located in...
Sealey Receiver Mounted Air Compressor, plant no. 58, year of manufacture 2014, dimensions approx. 1.5m x 0.5m x 1m high, capacity 270 litre, load...
Three Electric Motors, including one x Bombus tipo GNI 125 26/15. KW II & Two x GNI 80 16/30 - 22KW, plant no. 59, loading charge - £30, item loca...
Kiowa Spring Rewind & Manual Hose Reel, plant no. 60, loading charge - £10, item located in Bury St Edmunds, Suffolk, vendors client reference no....
Kiowa Spring Rewind & Manual Hose Reel, plant no. 61, loading charge - £10, item located in Bury St Edmunds, Suffolk, vendors client reference no....
Kiowa Spring Rewind & Manual Hose Reel, plant no. 62, loading charge - £10, item located in Bury St Edmunds, Suffolk, vendors client reference no....
Kiowa Spring Rewind & Manual Hose Reel, plant no. 63, loading charge - £10, item located in Bury St Edmunds, Suffolk, vendors client reference no....
Kiowa Spring Rewind & Manual Hose Reel, plant no. 64, loading charge - £10, item located in Bury St Edmunds, Suffolk, vendors client reference no....
Kiowa Spring Rewind & Manual Hose Reel, plant no. 65, loading charge - £10, item located in Bury St Edmunds, Suffolk, vendors client reference no....
Cling Film Heat Wrapper, plant no. 66, loading charge - £10, item located in Bury St Edmunds, Suffolk, vendors client reference no. 66
Mondial VAP 6000 Steamer, plant no. 67, loading charge - £10, item located in Bury St Edmunds, Suffolk, vendors client reference no. 67
MacAllister 60L 1800W Wet Dry Vacuum, plant no. 68, loading charge - £10, item located in Bury St Edmunds, Suffolk, vendors client reference no. 68
Loading...-
795 item(s)/page