Filtered by:
- Category
- List
- Grid
-
38 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any enquiries.
Three Electric Motors, including one x Bombus tipo GNI 125 26/15. KW II & Two x GNI 80 16/30 - 22KW, plant no. 59, loading charge - £30, item loca...
Two Pipe Benders loading charge - £10, item located in Bury St Edmunds, Suffolk, vendors client reference no. 88Lot offered for sale by private ne...
Two Pipe Benders loading charge - £10, item located in Bury St Edmunds, Suffolk, vendors client reference no. 89Lot offered for sale by private ne...
OK Super Taper & Infeed Rollers loading charge - £20, item located in Bury St Edmunds, Suffolk, vendors client reference no. 90Lot offered for sal...
Stainless Steel Floor Stand, dimensions approx. 1.7m x 0.5m x 0.3m high, loading charge - £10, item located in Bury St Edmunds, Suffolk, vendors c...
York Fabrications Conveyor, plant no. 14524, dimensions approx. 600mm wide belt x 1.6m long x 1.3m high, loading charge - £30, item located in Bur...
Screw Auger, dimensions approx. 2.2m long x 0.2m wide, loading charge - £40, item located in Bury St Edmunds, Suffolk, vendors client reference no...
K6 Conditioner, c/w 7.5kW motor (refurbished), plant no. 11, dimensions approx. 2300mm x 450mm dia., free loading onto purchaser’s transport - Yes...
Feedtech Conditioner, with stainless steel construction, 11kW (as new condition), plant no. 21, year of manufacture 2018, dimensions approx. 500mm...
Mono Pumps MH60R5 Progressive Cavity Pump, serial no. 30/107066/B, plant no. 41, free loading onto purchaser’s transport - Yes, item located in Ke...
Clarke Bench Top Sand Blast Cabinet, complete. free loading onto purchaser’s transport - yes, item located in Darlington, Durham, vendors comments...
John Dore Stainless Steel 2000L Tank, with slight cone bottom, 2in outlet lagged and clad in aluminium on four mild steel leg and internal steam c...
Edmo TSE Hi-Lift 1000 kg Pallet, three phase hydraulic/ electric mechanism, with stand away umbilical switch plus around safety cut-off switches (...
Penwalt Stokes Stainless Steel Vertical Tornado Mill free loading onto purchaser’s transport - yes, item located in Darlington, Durham, vendors co...
Trace Heated Fats Tank, located in a mild steel enclosure with the tank supported on 3 load cells, vendors comments/condition report - the tank wi...
Trace Heated Fats Tank, located in a mild steel enclosure with the tank supported on 3 load cells, vendors comments/condition report - the tank wi...
Jesma VDB/EE Belt Weigher, built 2002, vendors comments/condition report - average condition, loaded FOC yes, located Lincoln (V374577-5609) Lot o...
Tapered Twin Screw Discharger, 2 x 150mm dia., 1.7m long with 1.25m long inlet but no drive, vendors comments/ condition report - average conditio...
Cyclone In Framework, approx. dimensions of cyclone 900mm dia., 900mm vertical body, 1300mm deep cone and scrolled left hand entry. There is a 350...
Fully Refurbished Wenger 165 Long Barrel Extruder, with 160kw motor and vee belt drive. The extruder comes with a Wenger stainless steel live bin ...
PAM Blower, with 18.5kw drive, Serial no. 972321, vendors comments/ condition report - believed 1997 vintage, average condition, loaded FOC yes, l...
Mild Steel Cyclone, in support frame with rotary valve on the discharge. Frame is 2.04m x 2.04m x 5.82m high and overall height with cyclone is 7....
Stainless Steel Cyclone, split in two sections, no support frame no rotary valve on outlet. 1.7m dia. with 1.24m vertical and 3.0m deep cone with ...
Stainless steel cyclone in mild steel support frame with rotary valve on the discharge. Frame is 2.0m x 2.0m x 5.8m high and overall height with c...
200mm dia. x 0.76m long Round Cased Screw Feeder, with 1.5 kW in-line variable speed DC drive, vendors comments/ condition report - needs starter ...
200mm dia. x 0.76m long Round Cased Screw Feeder, with 1.5 kW in-line variable speed DC drive, vendors comments/ condition report - needs starter ...
200mm dia. x 0.76m long Round Cased Screw Feeder, with 1.5 kW in-line variable speed DC drive, vendors comments/ condition report - needs starter ...
200mm dia. x 0.76m long Round Cased Screw Feeder, with 1.5 kW in-line variable speed DC drive, vendors comments/ condition report - needs starter ...
Simon 300mm dia. Cast Steel Drop Through Rotary Valve, 410mm high with 260mm x 260mm inlet. The valve has offset bearings, a torque arm speed redu...
Insulated Stainless Steel Drying Cabinet, 1.5m x 1.25m x 1.3m high with door, vendors comments/ condition report - Poor condition, loaded FOC yes,...
Magnetic Separations PCD 100 Permanent Magnetic Separator, serial no. 7043, 150mm x 450mm on stainless steel spout section (note - this lot is sit...
Buhler Stainless Steel Screw (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, formerly lot Load o...
Assorted Electric Motors and Gear Boxes, on pallet (pallet not included) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purcha...
Assorted ELECTRIC MOTORS and Gear Boxes, on pallet (pallet not included) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purcha...
Mainly Electric Motors, on pallet (Note: This lot is situated at Ickleford Mill, SG5 3UN) Load onto purchaser’s transport FOC yes, formerly lot 12...
Electric Motors and Gear Boxes, on pallet (Note: This lot is situated at Ickleford Mill, SG5 3UN) Load onto purchaser’s transport FOC yes, formerl...
Two 80mm Aperture Stainless Steel Cased Permanent Magnetic Separators, each with AZO flow control valves (Note: This lot is situated at Ickleford ...
Pacepacker Top Form & Belt Feeder, serial no. 1558, with steel stand (lot located in Alford, Lincolnshire) (free loading onto purchaser’s transpor...
Loading...-
38 item(s)/page