Two x 5T SWL TWO GIRDER TRAVELLING OVERHEAD CRANE, serial no. AP100 (crane no. 1), approx. 18m, with two wire rope winchesPlease read the followin...

STEEL STORAGE UNIT, approx. 6m x 3m, fitted steel shelving (contents excluded – reserve removal until contents cleared)Please read the following i...

STEEL CARGO CONTAINER, 12m long, fitted steel shelving (contents excluded - reserve removal until contents cleared)Please read the following impor...

STEEL CARGO CONTAINER, 6m long (contents excluded - reserve removal until contents cleared)Please read the following important notes:- Removal of ...

Steel Cargo Container, 6m long (known to require attention – holes in roof) (contents excluded - reserve removal until contents cleared)Please rea...

Flammables Storage Cabinet, approx. 1040mm x 660mm x 660mm highPlease read the following important notes:- Removal of Lots: A sole principal contr...

STEEL CARGO CONTAINER, 12m long (loose contents excluded - reserve removal until contents cleared)Please read the following important notes:- Remo...

STEEL CARGO CONTAINER, 12m long (loose contents excluded - reserve removal until contents cleared)Please read the following important notes:- Remo...

STEEL CARGO CONTAINER, approx. 5m longPlease read the following important notes:- Removal of Lots: A sole principal contractor will be appointed t...

SINGLE SPAN STEEL PORTAL FRAMED BUILDING, approx. 28m x 18m x approx. 3.8m to eaves, with bay lighting, down draft fans, roller shutter door, clad...

Steel Portable Framed Building Single Span, approx. 14.7m x 7.6m x approx. 6m high to eaves, with cladding as fitted, bay lights (note vertical su...

BHS Sonthofen DKXC 4900 COMBIMIX TWIN SHAFT CONTINUOUS FLOW MIXER, serial no. B-7365-100-01, year of construction 2010, 10,000kg weight, approx. 2...

Steel Intake Tip Hopper, approx. 5.6m x 3m x approx. 2.5m deep overall, with steel supports and vibratory motors as fitted (please note this lot i...

600mm wide INCLINED CHEVRON TROUGH BELT CONVEYOR, approx. 8.5m centres long, with geared electric motor (please note this lot is part of combinati...

Steel Intake Tip Hopper, approx. 4.5m x 3m x approx. 3m deep overall, with steel supports and electric vibratory motors as fitted (please note thi...

500mm wide INCLINED CHEVRON TROUGH BELT CONVEYOR, approx. 30m centres long, with steel walkway and steel supports and geared electric motor drive ...

650mm wide INCLINED CHEVRON TROUGH BELT CONVEYOR, approx. 30m centres long, with steel supports and geared electric motor drive (please note this ...

Approx. 580mm wide Trough Belt Conveyor, approx. 3.6m long, with geared electric motor drive (please note this lot is part of combination lot 127)...

Three Compartment Storage Unit, comprising five cargo containers (please note this lot is part of combination lot 127)Please read the following im...

600mm wide Cleated Wall Belt Discharge Conveyor, 2.6m long, with geared electric motor drive (please note this lot is part of combination lot 127)...

600mm wide Cleated Wall Belt Discharge Conveyor, 2.6m long, with geared electric motor drive (please note this lot is part of combination lot 127)...

600mm wide Cleated Wall Belt Discharge Conveyor, 2.6m long, with geared electric motor drive (please note this lot is part of combination lot 127)...

800mm wide TROUGH BELT CONVEYOR, approx. 12m centres long, with geared electric motor drive (please note this lot is part of combination lot 127)P...

800mm wide INCLINED TROUGH BELT CONVEYOR, approx. 25.5m centres long (please note this lot is part of combination lot 127)Please read the followin...

VERTICAL CEMENT STORAGE SILO, with intake blow lines, steel supports, discharge chutes and staircase, dia. approx. 4.8m, understood to be 13.5m de...

APPROX. 325mm dia. INCLINED AUGER CONVEYOR, with geared motored electric motor and actuator valve on discharge (please note this lot is part of co...

APPROX. 325mm dia. INCLINED AUGER CONVEYOR, with geared motored electric motor and actuator valve on discharge (please note this lot is part of co...

Discharge Hopper, approx. 1.3m x 1.8m x 1.2m deep, with Torex rotary air seal and approx. 250mm dia. discharge auger conveyor, approx. 2.6m long f...

Discharge Hopper, approx. 1.3m x 1.8m x 1.2m deep, with Torex rotary air seal and approx. 250mm dia. discharge auger conveyor, approx. 2.6m long f...

Insulated Water Storage Tank, approx. 4.65m x 1m dia. (please note this lot is part of combination lot 127)Please read the following important not...

Allwieler NT32-200U3DW10 Centrifugal Pump, with electric motor drive (please note this lot is part of combination lot 127)Please read the followin...

520 Horizontal Receiver Mounted Air Compressor (please note this lot is part of combination lot 127)Please read the following important notes:- Re...

Mark DX600 Air Dryer, serial no. 1TJ228500, equipment no. 14793 (please note this lot is part of combination lot 127)Please read the following imp...

Pump Unit, with two electric motor drives and control panel (please note this lot is part of combination lot 127)Please read the following importa...

800mm Trough Belt Conveyor, approx. 9.4m centres long, with geared electric motor drive (please note this lot is part of combination lot 127)Pleas...

Oecon V202425 Five Door Control Panel, with electrical control equipment as fitted, Portable Containerised Office approx. 6m long, fitted air cond...

BOLTED STEEL PLANT ENTABLATURE/ ACCESS PLATFORM, approx. 10.4m x 8.2m x approx. 7.5m high (from floor to top level floor), with steel staircase (p...

COMBINATION LOT - Lots 101 to 126 offered for sale as a one lot contract - please note – the final highest bid on this lot will only be accepted i...

Residual Loose Contents of Container/ Storage Workshop, excluding designs and maintenance documentationPlease read the following important notes:...

STEEL 20FT SHIPPING CONTAINER/ WORKSHOP (reserve removal until contents cleared – contents and air conditioning units excluded), with steel access...

800mm wide INCLINED TROUGH BELT CONVEYOR, approx. 20m centres long, with geared electric motor drive and steel walkway/ support framePlease read t...

Steel Hopper, approx. 2.8m x 2.8m x approx. 3m deep, with load cells, steel support frame, hooped steel access ladder and 1200mm wide belt dischar...

600mm INCLINED TROUGH BELT CONVEYOR, 38.7m long, with electric motor, gear unit, support and walkwayPlease read the following important notes:- Re...

Approx. 750mm TROUGH BELT CONVEYOR, approx. 63m longPlease read the following important notes:- Removal of Lots: A sole principal contractor will ...

GRP BITUMEN STORAGE TANK, approx. 2.8m dia., approx. 8m deep on straight, with steel supports, hopper bottom approx. 1.5m deep, dust filter ventin...

300mm INCLINED AUGER CONVEYOR, approx. 2.8m long, with geared electric motor drive, one discharge outlet fitted actuator (note sale of this lot is...

SINGLE LEG ELEVATOR (understood to be belt and bucket), 350mm wide on casing, approx. 8.3m high (note sale of this lot is subject to availability)...

INSULTED BITUMEN HEATING/ STIRRING VESSEL, fitted 15kW electric motor, (burner/ heater understood to be oil fired), fitted load cells and fitted b...

Approx. 250mm Auger Conveyor, approx. 5.3m long, with geared electric motor and one discharge outlet fitted actuator (note sale of this lot is sub...

STEEL U-TROUGH PADDLE BLADE BITUMEN MIXER, approx. 2.4m x 3.2m x 2.4m deep, with electric motor drive, shaft mounted torque arm speed reducer (not...

Five Door Control Panel (to Bitumen Plant) (missing display panel) (note sale of this lot is subject to availability)Please read the following imp...

INSULATED HORIZONTAL HEATED BITUMEN STORAGE TANK, approx. 3m x 7m, with insulated cladding, two top mounted motor driven stirrers (note sale of th...

Granzow Horizontal Receiver Mounted Rotary Screw Air Compressor (note sale of this lot is subject to availability)Please read the following import...

HORIZONTAL BITUMEN STORAGE TANK, approx. 3.4m dia. x 9.4m long, with insulated cladding, walkway to top, steel cradle, load cells, two top mounted...

HORIZONTAL BITUMEN STORAGE TANK, approx. 3.4m dia. x 9.4m long, with insulated cladding, walkway to top, steel cradle, load cells, two top mounted...

40FT CONTAINERISED OIL FIRED BOILER, with Termo steam boiler, serial no. 16911, 290kW, 7.2 bar G test pressure, max. temp. 300°C, volume 0.207m³, ...

Loose Contents of Workshop Area, including battery electric drills, hand tools and three clothes lockers (note sale of this lot is subject to avai...

Horizontal Welded Steel Fuel Oil Storage Tank, approx. 1.5m dia. x 3.2m long (note sale of this lot is subject to availability)Please read the fol...

Portakabin PORTABLE JACKLEG OFFICE BUILDING, approx. 8.64m x 3.27m x 2.57m, with internal partitioning and fitted fume extraction cabinet (note sa...

WTC Binder Type 15115300000202 Laboratory Oven, serial no. 970416, 300° grade max. temp, 230V, internal dimensions approx. 590mm x 400mm x 500mm d...