2.5m Long Hydraulic Log Tipping Conveyor, with four V Rollers, lot located in Huntingdon, Cambridgeshire, loading free of charge - yesPlease read ...

Dragon Blue Diamond Log Planer, with four 37kW cutter heads and discharge belt conveyor, lot located in Huntingdon, Cambridgeshire, loading free ...

Inclined Belt Conveyor, for shavings, approx. 850mm wide x 8.5m long, lot located in Huntingdon, Cambridgeshire, loading free of charge - yesPleas...

Belt Conveyor, with galvanised case, approx. 600mm wide x 15.5m long, this unit conveys shavings to the bunker, lot located in Huntingdon, Cambrid...

Twin Bunker Part Inclined, approx. 10m long x 2.5m wide x 2.5m high and part 3.5m high, has twin chain and slat discharge conveyor throughout bunk...

Bunker Discharge Screw, approx. 500mm dia. x 5m long, with 200mm dia. center tube and open end discharge, lot located in Huntingdon, Cambridgeshir...

Shavings Spinner, approx. 1.4m dia. to lift shavings into drum dryer input air stream, lot located in Huntingdon, Cambridgeshire (please note - it...

Bullet Magnet, approx. 180mm dia. x 750mm long, lot located in Huntingdon, Cambridgeshire, loading free of charge - yes (please note this is part ...

Silo, with hopper bottom, agitator, rotary valve and filter on top, approx. 5m dia. x 7m high, lot located in Huntingdon, Cambridgeshire (please n...

UT Screw (from silo to injector fan), approx. 150mm dia. x 3.4m high, lot located in Huntingdon, Cambridgeshire, loading free of charge - yes (ple...

Rotary Drum Dryer, comprising MEC triple pass rotary drum dryer, approx. 3m dia. x 10m long on trunnions, with chain drive, the drum body is lagge...

30kW Suction Fan, with silencer, lot located in Huntingdon, Cambridgeshire (please note - it is the purchasers responsibility to dismantle and upl...

Provenair Reverseair Filter, approx. 1.5m dia. with 6m body height and rotary valve on outlet, lot located in Huntingdon, Cambridgeshire (please n...

Turner 6 x 4 Screen, lot located in Huntingdon, Cambridgeshire, loading free of charge - yesPlease read the following important notes:- ***Over...

Blowline Rotary Valve (from U trough screw to blowline), lot located in Huntingdon, Cambridgeshire, loading free of charge - yesPlease read the fo...

Blower & Pipework (to take dust to the silo feeding the furnace), lot located in Huntingdon, Cambridgeshire (please note - it is the purchasers re...

Handling Techniques Silo, with sweep arm discharge, approx. 1.5m dia. x 4.5m wall height, total Volume approx. 8m3, lot located in Huntingdon, Cam...

Large Silo, with sweep arm discharge and filter on top, approx. 4m dia. x 6m wall height, total volume approx. 75m3, lot located in Huntingdon, Ca...

Control Equipment (located in building), lot located in Huntingdon, Cambridgeshire (please note - it is the purchasers responsibility to dismantle...

Drum Magnet, approx. 250mm dia. x 500 mm wide, with drive unit but outer case is incomplete, lot located in Huntingdon, Cambridgeshire, loading fr...

Mechon Environmental AS2500 Straw Deduster, body approx. 2.5m long and rotor 1m dia., lot located in Huntingdon, Cambridgeshire, loading free of c...

Worldwide Electric Corporation WWES100-15-445TBBTEFC Foot Mounted Electric Motor, 100HP, 75kW, 1490 rpm (terminal box covers are missing), lot loc...

Worldwide Electric Corporation WWES100-15-445TBBTEFC Foot Mounted Electric Motor, 100HP, 75kW, 1490 rpm (terminal box covers are missing), lot loc...

Brook Hansen TEFC Foot Mounted Electric Motor, 75kW, 1475 rpm, lot located in Huntingdon, Cambridgeshire, loading free of charge - yesPlease read ...

Eco-Line ECO355M2TEFC Foot Mounted Electric Motor, 250kW, 1480 rpm, lot located in Huntingdon, Cambridgeshire, loading free of charge - yesPlease ...

Combination Lot - Complete Rotary Drum Drying Plant, with an evaporative capacity of approx. five tonnes of moisture per hour, the plant comprises...

AB250 Pellet Press, with inlet conditioning screw and 22kW motor, fitted with 6mm die (vendors comments - used for two weeks since purchase), Stai...

Kipp Kelly S-60 Vacuum Style Destoner, three phase, inlet hopper, Cereals capacity 14tph, air requirements - 226m3/min, loading free of charge - y...

Airmaster M/15E Dust Collector, 3kW fan motor, three phase, collects and shakes bags to empty, loading free of charge - yes, lot location Wilberfo...

Herbert Evenflow Belt Feeder, approx. 1800mm wide x 1600mm deep x 220mm high. It has a control panel with variable speed drive for the feeder belt...

Scanhugger HL 2-7-10 Single Shaft Shredder, motor is either 7.5kW or 11kW and believed to have been built around 2014. It has a rotor dia. of 900m...

Liebherr Hydraulic Grab, loading free of charge - yes, lot location Belford, NorthumberlandPlease read the following important notes:-***Overseas ...

Liebherr Hydraulic Grab, loading free of charge - yes, lot location Belford, NorthumberlandPlease read the following important notes:-***Overseas ...

Needham N32- M-1 Continuous Inkjet Printer, built in 2018. Can print on boxes and bags. Line speed up to 470 metres/min. Ink throw up to 50mm, loa...

Van Aarsen C750 Pellet Press, with 160kW motor, year of manufacture 1992 and just been fully refurbished, not used since. Set up for die track wid...

Round Cased Screw Conveyor, with 340mm flight dia., inspection plates and geared drive unit. Working length approx. 3.86m, inlet and outlet are po...

Triple Screw Discharger, approx. 1m wide x 1.3 m long, with a side mounted 2.2kW geared drive unit. It has three x 300mm dia. screws, the top is p...

Round Cased Mixing Screw, with 300mm dia. paddles, hinged access doors and geared drive unit. The working length is approx. 3.12m, the case is gal...

Morbark HD30 Mulch Hog, 770mm wide tray feeder feeding the 150kW mill and a 900mm wide twin chain exit conveyor approx. 9m long, with 5.0m dischar...

Alvan Blanch PCD 13300 CD Dryer, serial no. 20/49936, (understood to be built 2020), overall dimensions approx. 17.5m long x 3.7m wide x 4.0m high...

IMRO Inclined Belt Conveyor, on steel support work, with reception hopper. It has an approx. 1300mm wide flat belt with cleats, some missing. Conv...

Ken Mills Aries XL type 70 - 30 Twin Ram Baler, with 30kW hydraulic powerpack and the bales are wire tied. It can produce bales at up to 13 per ho...

Jaykrishna Magnetics Eddy Current Separator, there is a vibrating tray feeder and rotary drum magnet on the inlet to separate ferrous metals befor...

Belt Conveyor, approx. 8.5m long, with 1m wide flat belt and drive, loading free of charge - yes, lot location Grimsby, LincolnshirePlease read th...

Belt Conveyor, approx. 8m long, with 600mm wide flat belt, cleats and drive, loading free of charge - yes, lot location Grimsby, LincolnshirePleas...

U Trough Screw Conveyor, with stainless steel case and mild steel centre tube and flights. The conveyor is approx. 5.7m long, with 300mm dia. flig...

U Trough Screw Conveyor, with stainless steel case and mild steel centre tube and flights. The conveyor is approx 3.9m long, with 300mm dia. fligh...

U Trough Screw Conveyor, in mild steel, approx. 6.1m long, with 200mm dia. x 200mm pitch flights. Flights 3mm thick. Gearbox, chains and sprockets...

Pellet Press Conditioner, approx. 450mm dia. x 2.1m long, with stainless steel case, mild steel shaft and nearly new stainless steel paddles. 11kW...

U Trough Screw Conveyor, in mild steel, approx. 2.1m long, with 300mm dia. x 300mm pitch flights. Flights 3mm thick. Gearbox, chains and sprockets...

Mixing Screw, in mild steel, approx. 1.6m long x 450mm dia., with 4kW geared drive, loading free of charge - yes, lot location Umberleigh, DevonPl...

Chain and Flight Conveyor, approx. 8.5m long, with 200mm wide flights and gearbox only (no motor). The chain is roller type and flights are replac...

Chain and Flight Conveyor, approx. 3.8m long, with 200mm wide flights and gearbox only (no motor). The chain is roller type and flights are replac...

Chain and Flight Conveyor, with troughed case and 300mm wide D shaped HDPE flights. Total length approx. 34.5m. It has roller chain and a 4kW driv...

Galvanised Inclined Twin Chain Bunker Feeder, with levelling reel, approx. 9.4m long x 2.1m wide at base and 3.14 metres wide at entry level. With...

Belt and Bucket Elevator, approx. 8m high, with 1.5kW gearmotor and chain drive. New in 2021 and was moving grass pellets at around 4 tph. Buckets...

Stainless Steel Belt and Bucket Elevator, approx. 6.7m high, with 2.2kW gearmotor and chain drive. Stainless steel buckets 220mm wide x 130mm pitc...

Twin Deck Pellet Cooler, approx. 6.2m long x 1m wide x 1.3m high, with drive and twin chain discharge conveyor. Cooler was built by Hoskins Engine...

Stainless Steel Rotary Sieve, on support frame with gearmotor drive. Rotating drum approx. 1m diameter x 2.9m long. Can operate with two different...

Cyclone, in mild steel, built 2021 and done only two seasons work. Built to replace worn out unit aspirating milled grass from X26 hammer mill. Th...