1 sliding panel table saw by Felder type K-700, YOM 2015, 3ph with 1 blade fitted, supplied with 9 other spare blades and various accessories on s...

1 pass through sander by SCM Sandya type UNO, No. AE004252, 3ph , max width approx 930mm, supplied with 8 spare sanding belts ...[more]

1 workshop compressor by Clarke Air Industrial type SE25C10, YOM 1996, 3ph

1 bench top pillar drill by Sealey type SDM 150, 240v – start / stop switch requires attention

1 bench top pillar drill by Clarke Metal Worker type CDP302B, 240v and 1 Record No.2 bench vice both attached to a white two drawer wooden stand –...

A 4 side automatic planer by Griggio type Quadro G22/4, YOM 2002, 3ph includes handle and accessories in front storage locker

4 adjustable roller stands, 4 adjustable trestle stands, 1 folding work bench and 1 Acrow type prop

1 chisel mortiser by Multico type MCD, 3ph

A single end compact tennoner by Multico type TM.3, 3ph supplied with 2 cutter blocks (fitted) and 3 other cutter blocks, various spanners and a t...

1 bench top router table with a Makita router fitted, 240v and a large quantity of various router bits

A quantity of various items including 6 large G clamps, a grease gun, sockets, screws, abrasive paper, nails, hinges etc

1 wooden work bench with a wood workers vice fitted, approx 2.02m x 90cm

A pair of metal fork extensions, each approx 1.53m long

1 space heater by Calor type Comet MkIV(s) gas / 240v

1 space heater by Calor type Mini Comet MkII gas / 240v

1 industrial vacuum cleaner by Numatic type NVT1500, 240v

1 chisel mortiser by Multico type MX, 3ph ...[more]

1 pnuematic chain mortiser by Centauro type CBO, YOM 2001 supplied with various accessories including an unused chain ...[more]

1 spindle moulder by Sedgwick type SM4 II, 3ph with 1 cutter block (fitted), 2 other cutter blocks and a Griggio GM4/34 power feed unit

1 Wadkin Bursgreen band saw type B700 no. 72240, 3ph with 1 blade (fitted) and 5 other spare blades (blades are stored in the next door unit near ...

1 circular table saw by Sedgwick, 3ph with 1 blade fitted and 4 other spare blades

1 planer thicknesser by Felder type D951, YOM 2012, 3ph

1 radial arm cross cut saw by Maggi Engineering type Junior 640, 3ph on a metal stand with a wooden support table each side

1 planer by Felder type A7-41, 700 Series, YOM 2007, 3ph

1 spindle moulder by Wadkin type EQ 1961, 3ph – Please note this spindle moulder requires new bearings to be fitted and two new bearings are inclu...

1 shelf unit containing a quantity of various cutting blocks and other items

1 shelf unit containing a quantity of various cutting blocks and other items including a 5 blade Leuco grooving set

2 Sealey bench grinders, both 240v (1 x 6 inch & 1 x 8 inch) and a quantity of various nails ...[more]

5 lengths of oak , each approx 100mm x 200mm x 2.1m long (lengths vary slightly)

1 x 200L drum (sealed) of Koppers Protim 265 wood preservative

A quantity of various timber including European oak, beech, sapele, ash, Douglas Fir etc. On left hand side of the first building

A large quantity of various timber mainly European oak and sapele. Leaning on rear wall the first building

A large dust extraction unit, 3ph situated outside on right hand side of the workshops. The extraction unit is mounted on a raised metal platform ...

1 wooden work bench approx 2.1m x 1m (NO vice attached) ...[more]

1 poly prop banding kit and a quantity of ratchet straps

3 unused saw blades comprising 1 x Silverline TCT, 1 x Bosch Speedline Wood LWZ and 1 x Bosch Optiline Wood UW ...[more]

1 Whitehill rebate block

1 Fielding block

a two part tongue / groove block set by Stehle

2 universal rebate / moulding blocks

A quantity of various chisel mortise bits

1 wooden work bench with a wood workers vice fitted, approx 3.4m x 1m (the wood shown on top of the bench in the photos is not included) ...[more]

A large quantity of sawn soft wood lengths (over 140), each 100mm x 22mm x 3m

1 large Sapele board approx 75mm x 700mm x 3450mm

1 Sapele board approx 75mm x 400mm x 2220mm

3 lengths of soft wood (miss cut trusses) each approx 230mm x 65mm x 3.7m

16 various sash cramps

1 Morso foot operated mitre cutter model F (please note the right hand measuring arm is broken and NO adjustable rebate supports are fitted) and 1...

1 Dewalt D26421 sander, 240v

1 Dewalt D26421 sander, 240v and 1 Silverline biscuit jointer, 240v

4 Dewalt cordless drills, 12 batteries and 2 chargers

5 various Bosch tools comprising 1 x sander, 1 x detail sander, 1 x jigsaw and 2 cordless drills with 1 battery but NO charger ...[more]

A quantity of various tools comprising 1 Hitachi drill & 1 Hitachi impact driver with 2 batteries / 1 charger, 1 GMC sander, 1 corded drill and 2 ...

1 wooden work bench with a wood workers vice fitted, approx 2.45m x 1.22m ...[more]

A quantity of various items including coach bolts, PVA, washers, abrasive paper, nuts, hinges, saws etc

1 wooden work bench with a wood workers vice fitted, approx 2.14m x 1m ...[more]

11 various air tools (mainly nail guns) and a quantity of staples

2 Record flooring clamps and 7 various G clamps

1 Erbauer sander, 2 Wolf Sapphire circular saws, 1 Wolf drill and 1 other drill

1 wooden work bench, approx 3.45m x 89cm – NO vice fitted ...[more]