A PRAMAC Protech Model P12000 Petrol Generator with GX620 V Twin 14.9KW (20HP) engine, 230V/110V Output, RCB Panel, Three 110V Outputs, Two 230V c...

A MOTIVAIR Twin Cylinder Compressor mounted on Horizontal Welded Receiver, Serial No. 25144, 150psi SWP 240V

A Forge Steel 150mm Swivel Anvil Vice mounted on Pull-Out Rail System for Fitting to a Van. Slideways overall 1580mm - effective Pull-Out Range 4...

A DRAPER 680mm x 460mm x 860mm 7-Drawer Tool Chest, Lockable Keys present (Note: some damage to bottom two drawers - usability unaffected)

A DRAPER Multi-Drawer Tool Cabinet with Lift and Fold Over Lid, Lockable Keys present, complete with A Quantity of Sundry Hand Tools including Fil...

Six Various 4 Inch G Clamps, A RECORD 6 Inch G Clamp (As Found), A RECORD 8 Inch G Clamp and A RECORD 10 Inch G Clamp

Four 14 Inch F Clamps and A 12 Inch F Clamp complete with Wall Bracket

A Pair of 12 Inch Carver Clamps complete with Wall bracket

A 2300mm Carver Cramp

A 1360mm Carver Cramp

Three RECORD Cramps, 3ft, 4ft and 4ft 6 Inch and An F Clamp- and An MHS 5ft 3 Inch Cramp

Two Tarpaulins, One Approx. 3000mm x 2300mm and One Approx. 8000mm x 5000mm ...[more]

Two 3-Phase Extension Leads with IP44 Connectors ...[more]

Two 20-Litre Diesel Jerry Cans

A 20-Litre Petrol Jerry Can and A 5-Litre Petrol Jerry Can and Filling Spout

A Banding Trolley, Banding Tools and A Quantity of Banding with Clips and Corner Protectors

Two 1200mm x 600mm Heavy Duty Welding/Straightening Benches complete with Tie Bars, Clamps and Associated Threaded Bar, etc., in A Tote Bin

A 1500mm x 1010mm Heavy Steel Welding Bench

A 1790mm x 790mm Heavy Steel Open Frame Welding Bench

An 1800mm x 830mm Heavy Steel Welding Bench complete with RECORD No. 3 4 Inch Vice

A 2290mm x 1080mm Heavy Duty Marking Out/Welding Bench with Steel Slab Top (Rated SWL 1000Kgs) complete with Threaded Apertures for Workpiece Clam...

A 1230mm x 620mm Steel 2-Tier Workbench, Chipboard Lower Tier, and 645mm x 450mm x 1020mm 3-Tier Steel Framed Trolley, and Two Further 3 Tier Trol...

A PEDRAZOLLI MEC BROWN 75 Pull-Down Cut-Off Saw on Cabinet Stand complete with Three 285mm dia. Saw Blades (Method Statement Required before Remov...

A STARTRITE Model SM250 Horizontal Band Saw, 120mm capacity, with Steel Bar Stock In-Feed Stand and Wheeled Out-Feed Stand (Method Statement Recqu...

A GEKA Hydracrop 55/A Iron Worker, Serial No. 18061, Angle Bar 90 Degree capacity 120mm x 120mm x 10mm, Flat Bar 300mm x 15mm, Round Bar 40mm dia....

A Pallet Box containing Fourteen Various Used Forklift Clamp Hydraulic Cylinders

A DEMAC Retractable Air Line Hose Reel and Bracket (Method Statement Required before Removal - Working at Height, Disconnect where Marked)

A Gas/Oxygen Wall mounted Hose Reel System complete with Bracket (Method Statement Required before Removal - Working at Height)

A DEMAC Retractable Air Line Hose Reel and Bracket (Method Statement Required before Removal - Working at Height, Disconnect where Marked)

A DEMAC 240V Retractable Extension Lead with Twin Outlet (Method Statement Required before Removal - Working at Height and Electrical Safety, Disc...

A DEMAC 240V Retractable Extension Lead with Twin Outlet (Method Statement Required before Removal - Working at Height)

A SEALEY 240V Retractable Extension Lead with Twin Outlet (Method Statement Required before Removal - Working at Height and Electrical Safety, Dis...

A DEMAC Retractable Air Line Hose Reel and Bracket (Method Statement Required before Removal - Working at Height, Disconnect where Marked)

A Pair of 1520mm x 125mm Slip On Fork Extensions (Note: LOLER Certification Required Prior to Use)

A Pair of 1640mm x 180mm Slip On Fork Extensions (Note: LOLER Certification Required Prior to Use)

A Pair of 1640mm x 180mm Slip On Fork Extensions (Note: LOLER Certification Required Prior to Use)

A Pair of CASCADE Class 2A Forks, Size 80mm x 40mm Fork Length 1000mm (Unused)

A Pair of CASCADE Class 2A Forks, Size 125mm x 45mm Fork Length 1200mm (Unused)

A Pair of CASCADE Class 2A Forks, Size 100mm x 40mm Fork Length 1200mm (Unused)

A Pair of CASCADE Class 2A Forks, Size 100mm x 45mm, Fork Length 1100mm, Triple Hook CASCADE G Series Rotator (Unused)

A Pair of VETTER Class 2B Forks, Size 100mm x 40mm, Fork Length 1150mm, JUNGHEINRICH Application (Unused)

A Pair of FEMA Class 4 Forks, Size 150mm x 60mm, Fork Length 2000mm (Unused)

A Pair of CASCADE Class 4A Forks, Size 140mm x 50mm, Fork Length 1800mm (Unused)

A Pair of MSI Class 2A Forks, Size 100mm x 40mm, Fork Length 1500mm (5 per cent worn)

A Pair of VETTER Class 2 Forks, Size 140mm x 50mm, Fork Length 1150, JUNGHEINRICH Application (Unused)

A B AND B ATTACHMENTS Model CM1 Man Riser Cage. 250Kg capacity, fitted Inter-locked Gates and AERO MOTIVE POW-R-MITE Electric Reel System, Platfor...

A 2-Man Riser Cage, Unladen Weight 126Kg, Max. Load 300Kg at 500mm Centres (Note: Requires LOLER Inspection prior to use)

A 2-Man Low Height Work Platform with Fork Pockets, 1020mm x 1020mm

A Pair of Heavy Duty Steel Work Horses, 1420mm x 150mm x 770mm

Three Heavy Duty Steel Work Horses, 1420mm x 150mm x 770mm

A Boom Attachment, 3000mm x 70mm dia. (Note: Requires LOLER Inspection prior to use)

PROTIER FORGING AND FABRICATION Model SCMJ3 Forklift Truck Jib, 1800mm - 2000Kg max. capacity at 610mm Load Centre, Net Weight 160Kgs (Note: Requi...

A Double Ended Grinder Steel Stand

A Heavy Duty Steel Stock Stand, Overall 1460mm x 1350mm x 2480mm

Two Steel Test Weights, 965Kg and 500Kg (Not Calibrated) (Note: Use Reserved until 2509/20)

The Pallet Racking comprising Three 4200mm Masts, Six 4600mm Masts, Three 2700 Masts, Twenty Four 2300mm Beams and Twenty Eight Assorted 2700mm Be...

A Pair of CASCADE 35D CF Class 4 Bolt On Forks, Size 125mm x 45mm, Fork Length 2200mm (Unused)

A Pair of CASCADE Class 4 Bolt On Forks, Size 150mm x 50mm, Fork Length 1200mm (Unused)

A Pair of CASCADE Fork Positioner Forks, Size 120mm x 40mm, Fork Length 1500mm (Unused)

A Pair of CASCADE Fork Positioner Forks, Size 120mm x 50mm, Fork Length 1200mm with Wear Tiles (Unused)