VERTICAL STAINLESS STEEL TANK, approx. 1.8m dia. x 4m deep (immediate piping only included) (please note this lot is part of combination lot 29)P...
VERTICAL STAINLESS STEEL TANK, approx. 1.8m dia. x 4m deep (immediate piping only included) (please note this lot is part of combination lot 29)P...
Cherry Burrell All Stainless 3,000 Gal. Horizontal Jacketed Aseptic Storage Tank, S/N E-044-95, High Pressure, High Temp Rating, Dual Sprayball, H...
Iddon press 36x36 with hydraulic tank - (asset no. 08-008) - (Sold as installed. Will require disconnecting and dismantling prior to removal)
Clarke Air Industrial screw compressor with horizontal air cylinder. Air Com tank serial no. 063037 YOM 09-15. Please see photo of manufacturing p...
CIP EQUIPMENT, comprising plastic tank approx. 760mm dia. x 1m deep, stainless steel tank approx. 700mm dia. x 800mm deep, with steam coil to insi...
Stainless steel food grade tanks are insulated and clad with stainless steel sheets some areas of which are painted. These vessels are mounted in ...
CIP EQUIPMENT, comprising plastic tank approx. 800mm dia. x 1050mm deep, stainless steel tank approx. 600mm dia. x 900mm deep-on-straight, two CIP...
You are bidding on a New Unused 220 Litre Demountable Refuelling Tank.c/w 12 volt, pump, hose, and gun.Sold as shown W14108
(2) Melting Tanks, Internal Dims. Aprox. 18” L x 18” W x 20” Deep, One with Lid (LOCATED IN MARTINSBURG, WV)
Aprox. 500 Gal. S/S Single Wall Mix Tank,Mounted on S/S Frame (INV#88401) (Located in Fort Worth, TX) (Handling, Loading Site Management Fee: $750...
S/S JET-SPRAY COP TANK WITH CENTRIFUGAL PUMP, IN-LINE FILTER AND S/S CONTROL CABINET WITH CHART RECORDER, APPROX. 77 IN. L X 23 IN. D
Paterurizer 5400 gal/h with ballast tank, hold tube 2 1/2"; Valves; Electric panel. (Loading Fee $1,500) (Located Dixon, IL)
Raw Milk/ Finished Milk Tank Agitator Control Panel (please note this lot is part of combination lot 29)Please read the following important notes:...
Dip tank with elevator Stainless steel. Tank 1.3m x 0.9m, elevator 1.6m x 0.5m exit 1.4m
UF System; Ballast Tank 250 gal; Two Tubes Preheater; Four Tubes UF (6" diameter / 50" long); Pump, Control Box. (Loading Fee $2,000) (Located Dix...
Filler; CIP Tank; Table (Loading Fee $300) (Located Dixon, IL)
Burg Water recirculation tank & dryer Total length 9m x 1.8m wide
Stainless steel dip tank with elevator 7m x 0.8m exit height 2.7m
Stainless Steel Tank/ Hopper, approx. 2.5m x 1m dia., on stainless steel fabricated legs. Lot located Bretherton, Lancashire. Lot loaded free of c...
Stainless Steel Tank/ Hopper, approx. 2.5m x 1m dia., on stainless steel fabricated legs. Lot located Bretherton, Lancashire. Lot loaded free of c...
APV Process Plant & Machinery/ T Bibby 4,500 litre STAINLESS STEEL TANK, approx. 2.3m dia. x 1.6m deep, order no. 201/E-MT3, year of manufacture 1...
Goodway Continous Mixer includes 175 Litre Batter Holding Tank, S/S Holding Tank that is Jacketed for Temperature Control (Located Jessup, MD) (Lo...
Parish BIB Filler, Model M125 with All Push Button Controls, Ricelake Scale Built-in for Weight Filling, Endhouse Flowemeter for Filling Volume, 1...
Groen 100 Gal. Steam Jacketed Tank with 2-Blade, 2 hp, 3 Phase Chemineer Mixer, 2" Tri-Clamp Outlet, 60 psi Steam Jacketed (Rigging/Skidding Fee $...
Burg Water recirculation tank & dryer Total length 7m x 1.5m wide
2013 Harlequin BlueStation 5,000 Litre Bunded AdBlue Tank S/No. 5234 Fitted with Piusi F0020305A Pump and Afriso Unitel Volume Level Guage, 240v
Sollich Type WKH Coolant Distribution Unit of 8 lines.480 volts 3 ph. 4 componants as been remove from the machine 1motor,1,valve and 2 expansion...
1 x Cryovac dip tank. Lift Out £30. Located Suffolk. UKFM2-5484
Mixing Tank - YR.2005- (LOCATED IN OZARK, AL)
Hopper\Tank conic 55'' Diameter x 48''tall 24'' dia. Cover 6 inch butterfly bottom valve outlet.Made in USA by Utensco (Item #103F) (Simple l...
Hopper\Tank conic 55'' Diameter x 48''tall 24'' dia. Cover 6 inch butterfly bottom valve outlet.Made in USA by Utensco (Item #103G) (Simple lo...
Hopper\Tank conic 55'' Diameter x 48''tall 24'' dia. Cover 6 inch butterfly bottom valve outlet.Made in USA by Utensco (Item #103H) (Simple lo...
Hopper\Tank conic 55'' Diameter x 48''tall 24'' dia. Cover 6 inch butterfly bottom valve outlet.Made in USA by Utensco (Item #103I) (Simple l...
Hopper\Tank conic 55'' Diameter x 48''tall 24'' dia. Cover 6 inch butterfly bottom valve outlet.Made in USA by Utensco (Item #103J) (Simple lo...
Hopper\Tank conic 55'' Diameter x 48''tall 24'' dia. Cover 6 inch butterfly bottom valve outlet.Made in USA by Utensco (Simple loading fee $75)
Hopper\Tank conic 55'' Diameter x 48''tall 24'' dia. Cover 6 inch butterfly bottom valve outlet.Made in USA by Utensco (Item #103L) (Simple l...
Hopper\Tank conic 55'' Diameter x 48''tall 24'' dia. Cover 6 inch butterfly bottom valve outlet.Made in USA by Utensco (Item #103M) (Simple lo...
Mixing Tank (1) - 21463 (LOCATED IN OZARK, AL)
Mixing Tank (2) - 21161 (LOCATED IN OZARK, AL)
Circular Plastic Tank, approx. 1100mm dia. x 1700mm high, with top cover and internal agitator, with motor, approx. 1500 litres capacity. Lot loca...
Babbini PE10B Twin Screw Dewatering Press, serial no. 634, year of manufacture 2011, with twin parallel stainless steel screws, approx. 680mm dia....
1 x Carpigiani batch freezer model Labo 30/45 XPL. A high-performance device in very good technical condition with a water and energy saving syst...
Mobile mozzarella hardening tank. Understood to have been bought in 2018Please note this lot is not subject to VAT. The hammer price will still b...
Protima 20L Manual Agitation steel pressurised tank
EVERKLEEN L' HOIR STAINLESS STEEL TANK (SIMPLE LOADING FEE:$1,925.00)
STAINLESS STEEL WATER SURGE TANK (SIMPLE LOADING FEE:$1,925.00)
(2) TOTE BULK HANDLING SYSTEMS S/S TANKS, APPROX. DIMS: 41 IN. X 46 IN. X 80 IN. (LWH) (SIMPLE LOADING FEE $137.50)
Atlas 1,350L tank. With 12v pump. V
Tank - Rectangular Molasses Tank, 3.0 metres x 2.6 metres x 2.9 metres high with inlets, outlets, access ports etc. Working volume about 22 cubic ...
Oil Extraction Press - Complete Oil Seed Rape Extraction Plant, built with new machines in 2007 and closed in 2010. The oil was going into the bio...
"Screw Press - Babbini model PE10B twin screw dewatering press serial number 634 built in 2011. It has twin parallel stainless steel screws about ...