Indar BZKL-630-L/4 3750kVA AC GENERATOR, serial no. 70001147, year of manufacture 2009, 1500rpm,
Indar BZKL-630-L/4 3750kVA AC GENERATOR, serial no. 70001147, year of manufacture 2009, 1500rpm, 11,000V, 50Hz (cable excluded), with two coolant ...
Indar BZKL-630-L/4 3750kVA AC GENERATOR, serial no. 70001147, year of manufacture 2009, 1500rpm, 11,000V, 50Hz (cable excluded), with two coolant ...
Three Door Control Panel, for turbine and generator (please note this lot is part of combination lot 3)Please read the following important notes:-...
Turner FLAKING ROLLER MILL, 900mm working width, serial no. 34350, year of manufacture 1997, with variable speed stainless steel feeder, small fee...
Two Diesel Powered Three Phase Electric Generators with Scania Marine V8 Engines (2018), 1 x 715 KVA, 1 x 670 KVA, Indicated Hours - 6,500 hrs and...
KSB MIC/D 50/15-031.2062 Pump, serial no. 99/1326306/000500, 20.95m³/h, year of manufacture 2008, with ABB 75kW electric motor, 2978rpm, with imme...
KSB MLC1 50/15-03 Pump, serial no. 9971326288/000500/02, 20.95m³/h, year of manufacture 2008, with ABB 75kW electric motor, 2978rpm, with immediat...
Ian Flockton GRP/Plastic Sheeted Water Tank, approx. 3.5m dia. x 3.3m deepPlease read the following important notes:- ***Overseas buyers - All lot...
Two Centrifugal Water Pumps, each with electric motor drivePlease read the following important notes:- ***Overseas buyers - All lots are sold Ex W...
30,000 litre Plastic Water Tank, approx. 3m dia. x 5.3m highPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex ...
Vertical Welded Steel Air Receiver, approx. 2m high x 900mm dia. Lot located Bretherton, Lancashire. Lot loaded free of charge onto purchasers tra...
Atlas Copco GA11VSD+FF PACKAGED AIR COMPRESSOR, serial no. AP1263291, year of manufacture 2017, indicated running hours 29045 (at time of listing)...
Power Generation C500D5 450kVA DIESEL ENGINE STANDBY GENERATOR, serial no. A05K530980, year of manufacture 2005, with Cummins diesel engine, cont...
Two Universal Heat Transfer Ten Fan Liquid Cooling Units, with fabricated steel support stand, each pair overall size approx. 5m x 8.8m x 2.9m hig...
Two Universal Heat Transfer Ten Fan Liquid Cooling Units, with fabricated steel support stand, each pair overall size approx. 5m x 8.8m x 2.9m hig...
Two Universal Heat Transfer Ten Fan Liquid Cooling Units, with fabricated steel support stand, each pair overall size approx. 5m x 8.8m x 2.9m hig...
Two Universal Heat Transfer Ten Fan Liquid Cooling Units, with fabricated steel support stand, each pair overall size approx. 5m x 8.8m x 2.9m hig...
Two Universal Heat Transfer Ten Fan Liquid Cooling Units, with fabricated steel support stand, each pair overall size approx. 5m x 8.8m x 2.9m hig...
Two Universal Heat Transfer Ten Fan Liquid Cooling Units, with fabricated steel support stand, each pair overall size approx. 5m x 8.8m x 2.9m hig...
Turners SEB 5448 litre cap. Bunded Storage Tank, serial no. 12211, year of manufacture 2015, 3.2m x 1.24m x 1.5m deep, with two pumps as fittedPle...
Vertical Welded Steel Air Receiver, approx. 1.9m high. Lot located Bretherton, Lancashire. Lot loaded free of charge onto purchasers transport – y...
Hydrovane Horizontal Receiver Mounted Air Compressor, model 502C10-201, serial no. 502-033266-1805 three phasePlease read the following important ...
Balmoral BUNDED PLASTIC DIESEL TANK, approx. 2.75m high x 2.8m dia., with dispensing equipment. Lot located Bretherton, Lancashire. Lot loaded fre...
Worthington Creyssensac Rollair 1500 Packaged Air Compressor 3,892 hours (at time of listing) (no. 1)Please read the following important notes:- *...
Worthington Creyssensac Rollair 1500 Packaged Air Compressor, 8,010 hours (at time of listing) (no. 2)Please read the following important notes:- ...
Titan ES 1000B 1000 litre cap. Bunded Plastic Fuel Storage Tank, approx. 2.14m x 695mm x 1.5m high. Lot located Bretherton, Lancashire. Lot loaded...
JED Type R500 11Y 500 litre Vertical Welded Steel Air Receiver, serial no. 15515684, year of manufacture 2010Please read the following important n...
30m Right Hand & 30m Left Hand 100mm pitch Steel Bush Conveyor Chain, type M112-100-P rivetted construction (unused – on pallet) (understood to be...
Twin Urea Injector, with variable pumps and fan (understood to be unused), on two palletsPlease read the following important notes:- ***Overseas b...
ATEX Rotary Valve, approx. 950mm x 230mm inlet, 350mm dia., 0.75kW (vendors comments - Tested and in working condition, some rubber flaps may need...
ATEX Rotary Valve, approx. 950mm x 230mm inlet, 350mm dia., 0.75kW (vendors comments - Tested and in working condition, some rubber flaps may need...
ATEX Rotary Valve, approx. 950mm x 230mm inlet, 350mm dia., 0.75kW (vendors comments - Tested and in working condition, some rubber flaps may need...
Compressor Air Filters, in boxPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At the close o...
Mild Steel Rectangular Storage Tank (believed to have held gas oil), tank approx. 1230mm x 1840mm x 1230mm deep, 2750 litres capacity. Some rust a...
Mild Steel Rectangular Storage Tank (believed to have held gas oil), tank approx. 1230mm x 1840mm x 1230mm deep, 2750 litres capacity. Some rust a...
Abott & Co Newark Vertical Compressed Air Receiver, working volume approx. 450 litres, working presseure 150 psi. Lot located in Lincoln, Lincolns...
Chopper Fan, with offset centre feed approx. 300mm dia., body 215mm wide and impellor 800mm dia. (no motor), with pulleys, belts and drive guard. ...
Vickers 25V21A Hydraulic Pump. Lot located at Navenby, Lincolnshire Please read the following important notes:-***Overseas buyers - All lots are s...
Broomwade Compair Cyclon 22 Compressor, in acoustic enclosure, serial no. F165/1678, year of manufacture 1998, with 26.1kW drive and will deliver ...
Twin Grundfos Pump. Lot located in Bradford, West Yorkshire. Loading free of charge - yesPlease read the following important notes:-***Overseas bu...
Gyratory - Texpan Oscillating Sieve, with a selection of spare screen meshes. Believed to be a model VGZ1.5T/2500 and built around 1995. It is 7.8...
Hydraulic Powerpack - Vickers Hydraulic Powerpack, with 7.5kW pump. Done little work. The pump is believed to be a model PVE19RW which will delive...
Hammer Mill - Christy & Norris B7/2 Hammermill, on base plate with a direct coupled 37 kW drive (seems to be well oversized). There is no fan on t...
Centrifugal Fan - Centrifugal Fan, with 838 mm dia. backward lamina impellor and 18.5 kW 1460 rpm direct drive. Inlet is 737 mm dia. and the upwar...
Grain Driers/ Burners - Riello RL100 Oil Burner, excellent condition. Fitted with 12.5 & 13.5 gallon nozzles. Used in 60tph dryer (1 remaining) (...
Walking Floor Bunker - Nazzareno 2R-9000 Push Floor Bunker (built in 2008), with 2 x 18.5kW hydraulic powerpacks. This unit comprises two grids si...
Centrifugal Fan - Woodcock-Wilson backward Lamina Centrifugal Fan, model BLN/BFN/500/PS4B D/D LG315 built 2005. The fan has an 18.5kW 2850 rpm dir...
Centrifugal Fan - Centrifugal Fan, with 110kW vee belt drive, 1.1 metre dia. impellor and pneumatic damper on inlet. The fan was moving up to 60,0...
Gasification Plant - Complete gasification plant, done very little work. Built 2010 closed 2013. Comprises Laimet wood chipper (see UCPE-6185, woo...
Rotary Compressor - Boge S15 Compressor, in acoustic enclosure. 11kW drive. Output up to 60 cfm at 8 bar. Has about 59,000 hours on it and has bee...
Rotary Compressor - Boge S15 Compressor, in acoustic enclosure. 11kW drive. Output up to 60 cfm at 8 bar. Has about 48,000 hours on it and has bee...
Air Dryer - Atlas Copco FX5 Refrigerant Air Dryer. Inlet capacity 74 cfm. Max working pressure 16 bar (UCPE 6192) Price - £750Please read the foll...
Air Dryer - De iTech 018 Refrigerant Air Dryer. Inlet capacity 64 cfm. Max working pressure 16 bar (UCPE 6193) Price - £750Please read the followi...
Centrifugal Fan - Euroventilatore TRC 1401 Centrifugal Fan, built in 2008 and not used for at least the last 7 years. This is a medium pressure fa...
Centrifugal Fan - Jorgan Hansen centrifugal fan model DAT 1000-90/R with backward sloping blades. The fan has a direct coupled 90kw drive. Output ...
Chain & Flight - Vecoplan chain and flight conveyor with mild steel case and open top. The trough is 830mm wide x 515mm deep with internal side ch...
Flaking - Turner flaking roller mill with 900mm working width. Built 1997 with serial number 34350. It has a variable speed stainless steel feeder...
Rotary Valve - DMN Westinghouse type AML300 4TS drop through rotary valve in cast steel with mild steel rotor. No drive. Believed built 2009 and n...
Pallet Conveyors (UCPE 6339) Price - £1,500 eachPlease read the following important notes:-***Overseas buyers - All lots are sold Ex Works (EXW)**...
Straw Shredding Line, from big bales to about 25mm particle size. Suitable for bedding bales or further size reduction for pelleting. The line com...