*

1 x Sanitising tunnel with collection bath, circulaton pump and dosing point, belt driven. Approx. dimensions: 150 mm wide belts. Aperture dimensi...

1 x S/s bench with shoe holder, takes 6-pairs boots. Approx. 1.5 m x 400 mm. #40. Lift out: £10.

1 x Tong and Peal box tipper with hydraulic pack. Marries up to lots 4 and 5. Dimensions approx. 2.6 m x 2.7 m x 3 m high. Taken out in working or...

1 x Tong S/s evenflow bulk hopper. Intake can be raised to reduce initial drop.  Overall length approx. 3.5 m x width 2.4 m. Belt width approx. 1....

1 x Destoner all s/s. Overall dimensions approx. 1.7 m x 1.1 m. Outfeed height 2.5 m. #60. Lift out: £50.

1 x Incline conveyor. Approx. 2 m high. Includes spare belt. Approx. 5 m x 500 mm. Belt 70 mm, angled flights over 200 mm, comes with new spare be...

1 x Conveyor approx. 4.8 m long x 450 mm wide belt. Distance between flights 300 mm. #64. Lift out: £20.

1 x Conveyor with 350 mm wide belt, distance between flights 700 mm. Overall width 800 mm, length 2.5 m. Outfeed 1.1 m. #76. LIft out: £10.

1 x S/s table. Mobile. Approx. 2 m x 770 mm x 1.8 m high. #80. Lift out: £10.

1 x S/s table approx. 1.3 m x 550 mm. #119A. Lift out: £10.

1 x All s/s dolav tipper. Tipping height 1.8 m. Overall 3.5 m high x 1.5 m deep x 2 m wide. #120. Lift out: £75.

1 x All s/s dipping screw. Distance between screws 900 mm. 600 mm deep. Infeed height 1 m. Outfeed 1.7 m. Overall dimensions 2.3 m high x 5 m long...

1 x S/s platform. Used for access to lot 12. Width approx. 800 mm. Height to top platform 1.2 m. Overall 2.2 m x 2.1 m. #125. Lift out: £10.

1 x Dolav tipper. S/s. Mobile. Fully guarded. Dimensions approx. 2m x 1.5 m x 2.3 m high. #126. Lift out: £50.

1 x All s/s dipping screw. Distance between screws 900 mm. 600 mm deep. Infeed height 1 m. Outfeed 1.7 m. Overall dimensions 2.3 m high x 5 m long...

1 x Box tipper. In good working order. Dimensions approx. 2.5 m x 2.2 m x 3.5 m. #140. Lift out: £50.

1 x Finis 8-lane onion peeler complete with waste auger, capable of peeling 1-1.2 t (60-80 mm onions). Separate motor and reduction box, runs appr...

1 x S/s auger. Separate motor and reduction box. Runs approx. 15 rpm. Approx. 1 m. 350 mm diameter.#143. Lift out: £40.

1 x Box tipper complete with spare rams. Hopper/elevator built in. Taken out in working order. Dimensions approx. 2.9 m x 2.3 m x 2.3 m high. #144...

1 x Finis 8-lane peeler complete with waste auger (Finis 2). Capable of peeling 1-12.2 t (60-80 mm onions). Capable of 22 cycles per minute. Comes...

1 x Dipping and dosing wheel approx. 1.4 m x 1.7 m x 2 m high. Wheel sections approx. 900 mm x 350 mm x 400 mm high. #148. Lift out: £20.

1 x S/s Intralox belt conveyor. Two lane conveyor system with multi load points, comes with controls. Comes with multi load points, and discharge ...

1 x S/s inclined conveyor with s/s bulk hopper. Designed for Dolavs to tip into. Variable speed drive. Approx. 3 m long. Outfeed height 2m. Overal...

1 x All s/s Yamato multihead weigher. Model ADW-714SWH. 14-head. Bucket size 200 mm x 220 mm x 200 mm deep. #157. Lift out: £75. Spares available ...

1 x GIC bagger. 10 kg bags. Currently set up with 860 mm wide film. With Markem X40 SmartDate printer. Overall dims approx. 2 m x 1.4 m.#159. Lift...

1 x Incline conveyor with Ceia THS metal detector aperture size 550 mm x 300 mm. Overall width 1.1 m x 3.3 m long. Outfeed height 800 mm. Infeed h...

1 x Complete Ward Becker MCL4.8 linear weigh station. (Stood on lot 28). #165. Lift out: £30.

1 x S/s heavy duty gantry used for raised processing areas. Approx. 3.3 m long x 3.8 m wide. Platform height 2.5 m. #166. Lift out: £75.

1 x Incline belt conveyor with Ceia metal detector. Aperture size 550 mm x 300 mm. Overall dimensions approx. 1.1 m wide x 3.4 m long. Outfeed hei...

1 x Box tipper. Comes with hopper and discharge conveyor. Dimensions approx. 2.5 m x 2.2 m x 3.5 m high. Taken out in good working order. #171. Li...

1 x Tong and Peal box tipper with hopper and discharge conveyor. With light guards. Taken out in good working order. #174. Lift out: £50.

1 x S/s Incline Conveyor. Quick release guards for hygiene strip down. 300mm belt width, distance between flights 200mm. In 500mm out 2.1 m. #178....

1 x S/s conveyor 300mm wide belt x 7.3m long. Food grade. #180. Lift out: £30.

1 x S/s conveyor. Approx. 360mm wide x 3.2 long. #181. Lift out: £30.

1 x Conveyor. Dimensions approx. 3.7 m x 350 mm modular belt. #181A. LIft out: £30.

START OF ONION RING LINE. 1 x Incline Conveyor. Overall dimensions approx. 3 m x 600 mm. Belt width 300mm. Distance between the flight 200mm. Outf...

1 x Finis automatic horizontal onion ring slicer. With 8 blades. The onions go through an automatic feeding system into the machine. It has 8 knif...

1 x Finis s/s inclined conveyor with hopper. Infeed height 300mm. Outfeed height 5 m. Belt with 450 mm. Distance between flights 150mm. #189. Lift...

1 x S/s Onion ring separation unit. Separates sliced slabs of onions, typically 10 mm thick, automatically into individual rings. Output typically...

1 x S/s conveyor approx. 400mm belt x 3.8 m long. #191. Lift out: £10. (Please note this lot is being offered individually and as part of a combin...

1 x S/s vibrating belt Sieve system. Approx. 2.8m x 1.6 m. For removing broken onion rings. Includes spare sieve chains. #192. Lift out: £50. (Ple...

1 x S/s inspection conveyor approx. 1m wide belt x 3.5 m. Reject chutes each side of the conveyor with a conveyor running below to take all the re...

1 x Cotswold Engineering /s.s Linear weigher.  2 lane. Designed to batch drop 7 kg of onion rings, can be set for different products and different...

1 x Fortress metal detector. With s/s conveyor. Aperture size approx. 450 mm x 200 mm high. Alarm and belt stop. Weight dump at the end of the con...

1 x S/S collection conveyor for trays with 600mm belt, Belt index's tray to under the weigher/metal check and delivers to collection point. 450 mm...

1 x Collection roller for trays after loading conveyor. Approx. 1.7 m long, rollers 600mm. #197. Lift out: £10. (Please note this lot is being off...

1 x Incline conveyor approx. 3 m x 600 mm. Belt width 300mm. Distance between flights 200mm. Outfeed height 1.4m. Infeed height 100mm. #198. Lift ...

1 x Finis automatic horizontal onion ring slicer. With 8 blades. The onions go through an automatic feeding system into the machine. It has 8 knif...

1 x Finis incline conveyor with hopper. Infeed height 300mm. Outfeed height 5 m. Belt width 450mm. Distance between flights 150mm.#200. Lift out: ...

1 x Onion ring separation unit with infeed conveyor. Dims approx. Separator 2.3 m x 1.2 m wide x 1.7 m high. Conveyor 2.3 m x 250 mm belt.. #201.L...

1 x Conveyor from onion separation feeding grading. Approx. 400 mm wide belt x 3.8 m long. #202. Lift out: £10. (Please note this lot is being off...

1 x Vibrating belt sieve system. For removing broken onion rings. Approx. 2.8 m x 1.6 m. #203. Lift out: £50. Spares available. (Please note this ...

1 x Inspection conveyor approx 1m wide belt x 3.5 m. Reject chutes each side of the conveyor with a conveyor running below to take all the reject ...

1 x Cotswold Engineering Linear 2 lane weigher. Designed to batch drop 7 kg of onion rings or 10-12 kg diced product. Can be set up for different ...

1 x Ceia THS series 21 with bucket drop. Aperture size approx. 450 mm x 200 mm high. 350 mm wide. Approx. 3.4 long. #206. Lift out: £20. (Please n...

1 x Cotswold Engineering collection conveyor for trays. Belt index's tray to under the weigher/metal check and delivers to collection point. Belt ...

1 x Collection roller for trays after loading conveyor.  Rollers 600 mm wide x 1.7m long. #208. Lift out: £10. (Please note this lot is being offe...

1 x Heavy duty gantry, now removed,split into 2, so can accommodate each line, so now 2 x standa alone. Dimensions approx. 6 m x 15 m x 1.9 m high...

1 x Safeline metal detector takes full buckets. Aperture size approx. 500 mm x 320 mm useable height. 450mm belt x 2.3 long. Mobile on wheels. #21...

1 x S/s elevated Conveyor approx, 400mm wide belt through a Ceia Metal Detector model THS series 21 aperture size 550 mm x 250mm high. Into a Bagg...