Affinez votre recherche
Primary Category
Catégorie
Brand
Item Type
- Drill (16)
- Chuck (15)
- Bore (10)
- Machine VIce (8)
- Vice (8)
- Reamer (6)
- Collet (5)
- Hand Reamer (4)
- Bolt (3)
- Boring Bar (3)
- Boring Head (3)
- Counter (3)
- Die (3)
- Face Plate (3)
- Collet Holder (2)
- Fly Cutter (2)
- Milling Cutter (2)
- Arbor (1)
- Bench Grinder (1)
- Charger (1)
- Drill Chuck (1)
- Drill Sharpener (1)
- Grinder (1)
- Hard Jaws (1)
- Hold Down (1)
- Indexing Head (1)
- Lapping Machine (1)
- Pillar Drill (1)
- Rotary Table (1)
- Sharpener (1)
- Soft Jaw (1)
- Threader (1)
- Tool Holder (1)
- Toolholder (1)
- Tube Bender (1)
Filtered by:
- Catégorie
- Liste
- Grille
-
68 item(s)/page
Ce commissaire-priseur a choisi de ne pas publier ses résultats. Veuillez le contacter directement pour toute demande de renseignements.
Startrite EFI Pillar Drill. Spindle Taper No.3 Morse. Spindle Speeds 125 - 2800rpm. Drilling Chuck C
Startrite EFI Pillar Drill. Spindle Taper No.3 Morse. Spindle Speeds 125 - 2800rpm. Drilling Chuck Capacity 5 - 20mm. Table Size 340mm x 340mm. Th...
Speedfam Model Speedlap 32 Rotary Table Lapping Machine With Four Pneumatic Power Hold Downs. Table
Speedfam Model Speedlap 32 Rotary Table Lapping Machine With Four Pneumatic Power Hold Downs. Table Diameter 32". Six 12" Parts Rings. Fully Enclo...
CHRISTEN Type 2-32 Twist Drill Grinding Machine. Capacity 2-32mm. Angles 60 - 180 Degrees. Grinding
CHRISTEN Type 2-32 Twist Drill Grinding Machine. Capacity 2-32mm. Angles 60 - 180 Degrees. Grinding Wheel Size 150mm x 40mm. Spare Wheel Arbor. Pi...
Surtech Single Abrasive Belt Linishing Machine. Belt Width: 100mm. Belt Length: Over 3000mm. Motor:
Surtech Single Abrasive Belt Linishing Machine. Belt Width: 100mm. Belt Length: Over 3000mm. Motor: 3 Phase 420V: 3KW. Motor Speed: 1430 rpm.
Morrisflex Model BNA100 Drill Sharpener and Grinding Machine. Drill Sharpening Capacity 35-70mm. Gri
Morrisflex Model BNA100 Drill Sharpener and Grinding Machine. Drill Sharpening Capacity 35-70mm. Grinding Wheel Size 200 x 25mm. Wheel Speeds 1400...
Pedrazzoli Universal Brown 32 Hydraulic Tube Bender. Maximum Bending Capacity 32mm x 1.5mm. Minimum
Pedrazzoli Universal Brown 32 Hydraulic Tube Bender. Maximum Bending Capacity 32mm x 1.5mm. Minimum Inside Bending Radius 20mm. Maximum Centerline...
Horizontal / Vertical Indexing Head. With Bison 200mm Diameter 3 Jaw Chuck.
Quantity of Parallels & 2 x Vee Blocks.
3 x Various Chucks. 1 x 160mm 3 Jaw Chuck With 50 Int Fitting. 1 x 6" 4 Jaw Chuck With 40 Int Fittin
3 x Various Chucks. 1 x 160mm 3 Jaw Chuck With 50 Int Fitting. 1 x 6" 4 Jaw Chuck With 40 Int Fitting. 1 x 3 Jaw Chuck With No.5 Morse Taper Fitti...
Quantity of R8 Tooling. Including Autolock Chuck With Imperial & Metric Collets. 1 x 3 Morse Taper S
Quantity of R8 Tooling. Including Autolock Chuck With Imperial & Metric Collets. 1 x 3 Morse Taper Sleeve. 1 x 2 Morse Taper Sleeve. ER40 With 2 x...
NT Tite-lock Milling Chuck and Collets with r8 Taper to Suit Bridgeport Etc. With Instructions & Car
NT Tite-lock Milling Chuck and Collets with r8 Taper to Suit Bridgeport Etc. With Instructions & Carry Case.
Boring & Facing Head. Head Size 3 1/2" Diameter. Spindle Taper 50 ISO x 1" Whit. Boring Bar Holes 3/
Boring & Facing Head. Head Size 3 1/2" Diameter. Spindle Taper 50 ISO x 1" Whit. Boring Bar Holes 3/4".
Lushington No.3A Precision Offset Boring Head. Head Size 3 3/8" Diameter. Spindle No 40ISO x 5/8" Wh
Lushington No.3A Precision Offset Boring Head. Head Size 3 3/8" Diameter. Spindle No 40ISO x 5/8" Whit. With Boring Bars in Wooden Box.
Boring Head. 40 INT. 98mm Diameter.
6 x BT50 Spindle Tools. 3 x Adjustable Boring Bars and 3 x Fly Cutters.
Five BT50 Spindle Tools 4 x Collet Holders and One Novex/Walter Tipped Fly Cutter
6 x BT50 Spindle Tools. Tipped for Milling Cutter Holders.
9 x BT50 Spindle Tools. ER40 Collet Holders and Collets.
8 x BT50 Spindle Tools. Straight Shank Side Locking Tool Holders.
Quantity of 40 ISO x 5/8" With Spindle Tooling. Comprising Of S.P.V. SA-1E Tapping Chuck and Boring
Quantity of 40 ISO x 5/8" With Spindle Tooling. Comprising Of S.P.V. SA-1E Tapping Chuck and Boring Head. Etc.
Three Bison Milling Chuck Sets With Collets From 6mm to 12mm. Spindle Tapers 40 ISO x 16mm.
Hampson 1 1/4" CHS Coventry Die Head. With Taper Threading Attachment. Spigot Size 2 1/8" Diameter.
Hampson 1 1/4" CHS Coventry Die Head. With Taper Threading Attachment. Spigot Size 2 1/8" Diameter. Bore 1 3/8" Diameter.
Selection of Revolving Centres. 3 & 4 Morse Taper. 1 x Straight Shank 1 1/2" Diameter.
2 x Ward 3A Roller Steady Turning Toolholders With Quick Withdraw Motion. Capacity 6 1/2" x 1 1/2 "
2 x Ward 3A Roller Steady Turning Toolholders With Quick Withdraw Motion. Capacity 6 1/2" x 1 1/2 " Diameter.
Four Jaw Independent Chuck. Size 15 1/2" Diameter. Camlock D1-8 Fitting. Spindle Bore 4".
Bison 400mm Diameter Independent Four Jaw Chuck. Fitting 4 Bolts 170mm PCD. Spindle Bore 100mm.
Bison 400mm Diameter Independent Four Jaw Chuck. Fitting 4 Bolts 170mm PCD. Spindle Bore 100mm.
Bison 3 Jaw Scroll Chuck. Size 250mm Diameter. Camlock D1-5 Fitting. Spindle Bore 75mm.
Burnerd 12" Three Jaw Scroll Chuck. Camlock D1-8 Fitting. Spindle Bore 3".
TOS 315mm Diameter Three Jaw Scroll Chuck. Four Bolt Hole Fitting 170mm PCD. Spindle Bore 110mm.
TOS 315mm Diameter Three Jaw Scroll Chuck. Four Bolt Hole Fitting 170mm PCD. Spindle Bore 110mm.
Quantity of Chucks. 1 x 4 Jaw 250mm Diameter. 1 x 3 Jaw 9" Diameter. 1 x 3 Jaw on Plate 7 1/2" Diame
Quantity of Chucks. 1 x 4 Jaw 250mm Diameter. 1 x 3 Jaw 9" Diameter. 1 x 3 Jaw on Plate 7 1/2" Diameter.
27" Diameter Face Plate. Width 3". Camlock D1-8 Fitting.
33" Diameter Face Plate. Thickness 3". Hole Through Middle 6". PCD of Bolt Holes 9 1/4".
Various Chucks, Face Plates & Catch Plate. TOS Fitting.
Quantity of Chuck Soft Jaws. Including 2 Sets of Hard Jaws.
Quantity of Screwed Shank End Milling Cutters.
Quantity of Straight Shank Drills. Various Sizes. Metric & Imperial.
Quantity of Straight Shank Drills in Boxes. Various Metric Sizes.
Quantity of Straight Shank Drills. Including Set of Metric Drills (Incomplete). Various Sizes.
Quantity of Straight Shank Drills. Including Set of Metric Drills (Incomplete). Various Sizes.
Quantity of Straight Shank Twist Drills. Various Sizes.
Quantity of 1 Morse Taper Twist Drills. Various Sizes.
Quantity of 1 Morse Taper Twist Drills. Various Sizes.
Quantity of 2 Morse Taper Twist Drills. Various Metric Sizes.
Quantity of 2 Morse Taper Twist Drills. Various Imperial Sizes.
Quantity of 2 Morse Taper Twist Drills. Various Imperial Sizes.
Quantity of Long Series Twist Drills. Various Imperial Sizes. 1 & 2 Morse Taper Straight Shank.
Quantity of Long Series Twist Drills. Various Imperial Sizes. 1 & 2 Morse Taper Straight Shank.
Quantity of Flat Bottom Twist Drills. Various Sizes 1 - 3 Morse Taper Straight Shank.
Quantity of Counter Bores. Various Sizes. 1 - 3 Morse Taper Straight Shank.
Quantity of Counter Bores. Various Sizes. 1 - 3 Morse Taper With Changeable Inserts.
Quantity of Counter Bores. Various Sizes. 2 - 3 Morse Taper. Interchangeable Cutters.
Quantity of Reamers. Various Metric Sizes. 1 Morse Taper.
Quantity of Hand Reamers. Various Imperial Sizes. 1 Morse Taper.
Quantity of Hand Reamers. Various Imperial Sizes. 1 Morse Taper.
Quantity of Reamers. Various Imperial Sizes. 2 Morse Taper.
Quantity of Hand Reamers. Various Sizes.
Quantity of Hand Reamers. Various Sizes.
6" Machine Vice. Jaw Width 6". Jaw Depth 1 3/4". Max Opening 4 3/8". Overall Height 4 1/4".
6" Machine Vice. Jaw Width 6". Jaw Depth 1 3/4". Max Opening 4 3/8". Overall Height 4 1/4".
Jones & Shipman 8" Machine Vice. Jaw Width 8 1/2".
6" Machine Vice On Swivelling Base. Width of Jaws 6". Maximum Opening 4".
Loading...-
68 item(s)/page