Industrial

Siemens TWIN-CA36 STEAM TURBINE, serial no. 4.736.023, year of manufacture 2008, output 3119kW (norm.) 3326kW (max.), at 1500rpm, with electro-hyd...

Gestre FlowServe FEED WATER VESSEL, serial no. 741493, type SW 06, year of manufacture 2008, 6,000 litre volume, approx. 1.75m dia. x 3.6m long, w...

BIB Cochran WASTE HEAT UNIT, serial no. 99/4618, 15149kW max. heat output, year of manufacture 2008, max. allowable temperature 260°C, with Greens...

35 Galvanised Steel Barrier Rails, each approx. 2.2m widePlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Wor...

Stainless Steel Fume Extraction Ducting, from two way union to chimney stack (excluding centrifugal fans), with stainless steel stand (please not...

Mikropul Nederman DUST COLLECTION UNIT, understood to be type FS722/3.25/455 (231), understood to be year 2005, with ducting (from first bend on c...

Durag DUST ANALYSER SENSORS, vendors comments  The Durag recently fitted was their most up to date model D-R 808 complete with all relevant M-cert...

Nine Galvanised Steel Barriers, each approx. 2.2m widePlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works ...

Saxlund FOUR TRACK WALKING LADDER PUSH FLOOR INTAKE, ladders approx. 6m wide x 20m long, with levelling auger, discharge twin chain and scraper co...

Bolted Sectional Steel Cyclone Receiver Unit, 2.4m dia., approx. 6.5m high, with ducting to fan, hooped steel access ladder and ducting to interna...

Steel Cased Centrifugal Fan, approx. 450mm dia. intake, approx. 350mm x 600mm delivery, with 37kW electric motor, 1475rpm, extended spindle and ga...

Lime Storage Bin, with blowline intake, two discharge augers, venting unit to top, hooped steel access ladder, bridge platform to adjoining silo, ...

Cyclone Receiver, with geared motor driven rotary air seal and steel frame (please note this lot is part of combination lot 101) Please read the ...

Electro-Hydraulic Power Pack, with 5.5kW electric motor and two control cabinets, on pallet (please note this lot is part of combination lot 101)...

Steel Rack & PPE, throughout roomPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At the clos...

Ship Mooring BollardPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At the close of the time...

Galvanised Steel Barrier Components & Equipment, as set outPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex W...

Mainly Galvanised Steel Palisade Fencing Components, in timber rackPlease read the following important notes:- ***Overseas buyers - All lots are s...

Assorted Electric Motors & Gear Units, on one pallet (please note this lot is part of combination lot 101) Please read the following important no...

Mainly Gear Units, on pallet, with electric motor (please note this lot is part of combination lot 101) Please read the following important notes...

Assorted Electric Motors & Gear Units, on pallet (please note this lot is part of combination lot 101) Please read the following important notes:...

Wire Rope, on roof of containerPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At the close ...

Assorted Contents of Racking, on right hand side of container, including wire rope cable, chain, rollers and equipmentPlease read the following im...

Van Side Door, Seat and Fire Extinguishers, as set outPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works ...

Loose Contents of Container, including fluids, kits, membrane, aerosols, piping (excluding lot 131)Please read the following important notes:- ***...

Rotary Metering Type - Buhler Rotary Bin Discharger, with 4hp drive, 600 mm dia. sweep arm, feed control gate and electro pneumatic cut off. (3 re...

Dust Handling Shaker Filter - DCE Unimaster UMA 250H G5 Shaker Type Dust Collector, with controller and purpose made under hopper but no acoustic ...

Centrifugal Fan - 700mm dia. Centrifugal Fan, with forward curved blades on the impellor and vee belt drive. The motor looks like 11 or 15kW (2 re...

Chain & Flight - 200mm wide Chain and Flight Conveyor, 8.0 metres long with galvanised case 320 mm deep. No drive and the chain is broken (UCPE 45...

Trommel - Enclosed Trommel, looks like a Snowflake model. It is 5.0 metres long x 2.44 metres wide x 3.4 metres high and has a dust extraction poi...

Motor - 110 kW 2950 rpm Foot Mounted TEFC Motor (2 remaining) (UCPE 5296) Price - £1,000Please read the following important notes:-***Overseas buy...

Motor - 110 kW 1490 rpm Foot Mounted TEFC Motor (2 remaining) (UCPE 5297) Price - £1,000Please read the following important notes:-***Overseas buy...

Aspirating Cleaners - Law Denis Aspirating Cleaner, section from above a rotary cleaner complete with fan and trash auger (UCPE 5302) Price - £1,5...

Furnace - Refactory Brick Lined Furnace, approx. 2.0 metres O/D x 5.2 metres long + 700 mm for the burner. The burner is a Hamworthy model AWG15 c...

Furnace - Gareth Jones 60LH Chain Grate Stoker, with refractory lined furnace, bed drive, combustion fan and control panel. The bed is 1.5 metres ...

Reversejet Filter - Galvanised Dust Storage Silo, constructed from smooth flanged panels. This silo is 4.0M dia. for 9.0M and then the walls slope...

Grain Cleaning & Dressing - Buhler DNRB 6012 oat clipper. Built 1978 but recently fully reconditioned by Hoflinger and not used since.(2 remaining...

Reversejet Filter - DCE Reversejet Insertable Filter, model DLM V6 10 F1. This has a filter area of 6M2 and a 0.75kW fan (5 remaining) (UCPE 6016)...

Gyratory - Gough Vibracon GV.5.1 Circular Vibrating Sieve, built in 2011. This unit is in good order and has stainless steel contact parts. It is ...

Bag Filter - Galvanised Michael Williams 5 bag dust collector with support stand. Bag diameter 500mm (UCPE 6269) Price - £500Please read the follo...

Deawner - Blair deawner 600mm long x 315mm wide x 470mm high with worn fingers. Needs 2 No new bearings, pulleys, 2.2kw drive and guard. (UCPE 628...

Bunker Feeders - Galvanised inclined twin chain bunker feeder with levelling reel. (UCPE 6292) Price - £8,000Please read the following important n...

Bale Conveyor -1.25 metre wide straw bale conveyor on supporting steelwork. The conveyor is 6 metres long and is raised 2.6 metres above floor lev...

Hammer Mill - Hammer mill, make unknown, with motor believed to be around 55kw for grinding straw from the tub grinder down to a particle size sui...

Cyclone - Buhler HT22 cyclone with a 5kw fan on top and Derion rotary valve on the discharge. Fan can deliver up to 2400m3/hr at 220mm wg. (UCPE 6...

Sieve - Simon Barron Z1 single deck pellet sieve. (UCPE 6322) Price £1,000.Please read the following important notes:-***Overseas buyers - All lot...

Baler - BalePak BP120 with control panel. Factory reconditioned in 2009 done about 10 bales since. Bale size 290mm x 440mm. Output up to 120 bales...

Dust Filter - Provenair reversair filter with rotary valve and fan. (UCPE 6341) Price - £3,000.Please read the following important notes:-***Overs...

Dust Filter - Airmaster 25M shaker type dust filter with 1.5kw fan. No underhopper. Has 12 No bags and a filter area of 25m2. (UCPE 6358) Price - ...

Hammer Mill - Centrefeed hammer mill (maybe by Haas) on support frame with vee belt drive and motor that could be 75kw. (UCPE 6362) Price - £5,000...