Industrial

Rotary Metering Type - Buhler Rotary Bin Discharger, with 4hp drive, 600 mm dia. sweep arm, feed control gate and electro pneumatic cut off. (3 re...

Dust Handling Shaker Filter - DCE Unimaster UMA 250H G5 Shaker Type Dust Collector, with controller and purpose made under hopper but no acoustic ...

Centrifugal Fan - 700mm dia. Centrifugal Fan, with forward curved blades on the impellor and vee belt drive. The motor looks like 11 or 15kW (2 re...

Chain & Flight - 200mm wide Chain and Flight Conveyor, 8.0 metres long with galvanised case 320 mm deep. No drive and the chain is broken (UCPE 45...

Trommel - Enclosed Trommel, looks like a Snowflake model. It is 5.0 metres long x 2.44 metres wide x 3.4 metres high and has a dust extraction poi...

Motor - 110 kW 2950 rpm Foot Mounted TEFC Motor (2 remaining) (UCPE 5296) Price - £1,000Please read the following important notes:-***Overseas buy...

Motor - 110 kW 1490 rpm Foot Mounted TEFC Motor (2 remaining) (UCPE 5297) Price - £1,000Please read the following important notes:-***Overseas buy...

Aspirating Cleaners - Law Denis Aspirating Cleaner, section from above a rotary cleaner complete with fan and trash auger (UCPE 5302) Price - £1,5...

Furnace - Refactory Brick Lined Furnace, approx. 2.0 metres O/D x 5.2 metres long + 700 mm for the burner. The burner is a Hamworthy model AWG15 c...

Furnace - Gareth Jones 60LH Chain Grate Stoker, with refractory lined furnace, bed drive, combustion fan and control panel. The bed is 1.5 metres ...

Reversejet Filter - Galvanised Dust Storage Silo, constructed from smooth flanged panels. This silo is 4.0M dia. for 9.0M and then the walls slope...

Grain Cleaning & Dressing - Buhler DNRB 6012 oat clipper. Built 1978 but recently fully reconditioned by Hoflinger and not used since.(2 remaining...

Reversejet Filter - DCE Reversejet Insertable Filter, model DLM V6 10 F1. This has a filter area of 6M2 and a 0.75kW fan (5 remaining) (UCPE 6016)...

Gyratory - Gough Vibracon GV.5.1 Circular Vibrating Sieve, built in 2011. This unit is in good order and has stainless steel contact parts. It is ...

Bag Filter - Galvanised Michael Williams 5 bag dust collector with support stand. Bag diameter 500mm (UCPE 6269) Price - £500Please read the follo...

Deawner - Blair deawner 600mm long x 315mm wide x 470mm high with worn fingers. Needs 2 No new bearings, pulleys, 2.2kw drive and guard. (UCPE 628...

Bunker Feeders - Galvanised inclined twin chain bunker feeder with levelling reel. (UCPE 6292) Price - £8,000Please read the following important n...

Bale Conveyor -1.25 metre wide straw bale conveyor on supporting steelwork. The conveyor is 6 metres long and is raised 2.6 metres above floor lev...

Hammer Mill - Hammer mill, make unknown, with motor believed to be around 55kw for grinding straw from the tub grinder down to a particle size sui...

Cyclone - Buhler HT22 cyclone with a 5kw fan on top and Derion rotary valve on the discharge. Fan can deliver up to 2400m3/hr at 220mm wg. (UCPE 6...

Sieve - Simon Barron Z1 single deck pellet sieve. (UCPE 6322) Price £1,000.Please read the following important notes:-***Overseas buyers - All lot...

Baler - BalePak BP120 with control panel. Factory reconditioned in 2009 done about 10 bales since. Bale size 290mm x 440mm. Output up to 120 bales...

Dust Filter - Provenair reversair filter with rotary valve and fan. (UCPE 6341) Price - £3,000.Please read the following important notes:-***Overs...