Siemens TWIN-CA36 STEAM TURBINE, serial no. 4.736.023, year of manufacture 2008, output 3119kW (
Siemens TWIN-CA36 STEAM TURBINE, serial no. 4.736.023, year of manufacture 2008, output 3119kW (norm.) 3326kW (max.), at 1500rpm, with electro-hyd...
Siemens TWIN-CA36 STEAM TURBINE, serial no. 4.736.023, year of manufacture 2008, output 3119kW (norm.) 3326kW (max.), at 1500rpm, with electro-hyd...
Index-6 IND-DOSE 45 RFC 8/4 MILK BOTTLING LINE, serial no. 45011, year of manufacture 2013, (equipment ran till approx. 2015/2016 then mothballed)...
STAINLESS STEEL CASED TWIN SCREW CONDITIONER, approx. 900mm wide on casing x 2.65m long, with two geared electric motor drives, stainless steel pa...
POR Ecomec SI OSCAR BRIQUETTING PRESS, serial no. 4709, year of manufacture 2010, indicated hours 15 (at time of listing - see photograph) (NOTE -...
AC1 Steel Cased Centrifugal Fan, with geared electric motor drive, 650mm dia. intake and 630mm x 450mm delivery, Lot located Honiton EX14 9AY, for...
COMBINATION LOT ā LOTS 1, 2 AND 2A OFFERED FOR SALE AS A ONE LOT CONTRACT (please note the final highest bid on this lot will only be accepted if ...
Serck Como Hamworthy STEAM CONDENSER, serial no. 24087, year of manufacture 2007, approx. 1.1m dia., approx. 7.4m long, with two multistage pumps,...
Milltech 1.5M DIA. HORIZONTAL PELLET SCREEN, Lot located Honiton EX14 9AY, fork truck on site available to assist with loadingPlease read the foll...
Gestre FlowServe FEED WATER VESSEL, serial no. 741493, type SW 06, year of manufacture 2008, 6,000 litre volume, approx. 1.75m dia. x 3.6m long, w...
STAINLESS STEEL TANK, approx. 1.4m dia. x 1.2m deep, with insulated jacket, with two valves (immediate piping only included) (please note this lot...
LOIBL LASHSLAGCON LNES-1470/AA=6300 APRON TYPE ASH CONVEYOR, approx. 6.3m axle distance, 3.8m horizontal length, 2.5m inclined length to the mater...
Approx. 300mm dia. Screw Conveyor, approx. 3.6m long, with geared electric motor drive and one discharge outlet, Lot located Honiton EX14 9AY, for...
Reda RE30T SEPARATOR, serial no. CO35/086, 7000g/min, 7.5kW, with immediate stainless steel piping and stainless steel control panel (please note ...
Abbott Vertical Welded Steel Blowdown Vessel, no. AC61876, year of manufacture 2017, 300 litre volume, approx. 600mm x 1m high, Lot located Honito...
TWO Greens SUPER HEATERS, serial no. OVL7202A-A and OVL7202A-B, each year of manufacture 2021, 202 litres volume, test date 2021, design temperatu...
Adpak EFK 250 HS L Sealer, serial no. 4973, 13amp, 240V, loading free of charge - yes, lot located in Accrington, LancashirePlease read the follow...
Wessex 300 Power Wrapper Rotary Pallet Wrapper, approx. 1.64m dia. on turntable (understood to be supplied new November 20423), Lot located Honito...
BIB Cochran WASTE HEAT UNIT, serial no. 99/4618, 15149kW max. heat output, year of manufacture 2008, max. allowable temperature 260°C, with Greens...
BIB Cochran ECONOMISER, serial no. 27/4621, year of manufacture 2008, max. allowable temperature 350°C, 2561kW max. heat output, with ducting to c...
Bio Flame Designed CERAMIC LINED FURNACE CHAMBER, approx. 3.5m x 3.5m x 4.2m deep, with control panel, discharge conveyor (note ā no burner), two ...
Bio Flame Designed CERAMIC LINED FURNACE CHAMBER, approx. 3.5m x 3.5m x 4.2m deep, with control panel, discharge conveyor (note ā no burner), two ...
Seven Door Control Panel (in Control Room)Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At...
Stainless Steel Fume Extraction Ducting, from two way union to chimney stack (excluding centrifugal fans), with stainless steel standPlease read t...
TWIN CHAIN & 350MM WIDE SCRAPER ASH DISCHARGE CONVEYOR, approx. 16.6m long, with geared electric motor drivePlease read the following important no...
Avery Berkel M400 Bench Top Weighing Machine, 15kg max., with display to both sides (please note this lot is part of combination lot 29)Please rea...
TWO CYCLONE RECEIVERS, each with tote bag discharge frame, hand operated slide, bolted steel stand (to both cyclones) and ducting to and including...
Mikropul Nederman DUST COLLECTION UNIT, understood to be type FS722/3.25/455 (231), understood to be year 2005, with ducting (from first bend on c...
Dantherm FS722/3.25/455(231) DUST COLLECTION UNIT, project item 180265/58702800, year of manufacture 2005, volume 30,000m³/h h I.B., 2008 with 110...
Ohaus Adventurer ARC120 3100g Digital Bench Scales (please note this lot is part of combination lot 29)Please read the following important notes:-...
AERATION WATER TREATMENT SYSTEM, including two Aqua Turbo aerators, netting, galvanised steel walkway, approx. 9.6m long and control panel. Lot lo...
Twin Bowl Wash Station, with stainless steel pipe fittings (please note this lot is part of combination lot 29)Please read the following important...
Durag DUST ANALYSER SENSORS, vendors comments The Durag recently fitted was their most up to date model D-R 808 complete with all relevant M-cert...
Two Urea Pumps, with steel base platePlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At the ...
IQR FH1200 WOOD SHREDDER, serial no. 1022, year of manufacture 2006, with electric motor drive, electro-hydraulic power pack, control panel, contr...
Approx. 950mm wide Inclined Belt Conveyor, approx. 19m centres long, with five steel supports and discharge chutePlease read the following importa...
Cochran Boilers Borderer 910kg/hr Oil Fired Boiler, serial no. 25/1052, year of manufacture 1995 (no test certificates, not run for approx. 7 year...
Saxlund FOUR TRACK WALKING LADDER PUSH FLOOR INTAKE, ladders approx. 6m wide x 20m long, with levelling auger, discharge twin chain and scraper co...
Tramco Chain & Flight Conveyor, approx. 7m centres long, with geared electric motor drive and one discharge outletPlease read the following import...
Tramco Inclined Chain & Flight Conveyor, approx. 600mm wide on casing, approx. 15m centres long, with geared electric motor drive and one discharg...
Bolted Sectional Steel Cyclone Receiver Unit, 2.4m dia., approx. 6.5m high, with ducting to fan, hooped steel access ladder and ducting to interna...
Steel Cased Centrifugal Fan, approx. 450mm dia. intake, approx. 350mm x 600mm delivery, with 37kW electric motor, 1475rpm, extended spindle and ga...
De-Bagging TablePlease read the following important notes:- Purchasers will be given assistance with loading where possible ***Overseas buyers - ...
Spent Lime Storage Silo, approx. 18 tonne cap., approx. 3m dia. x approx. 7.6m deep overall, with discharge auger, four loadcells and WAM dust ven...
Lime Storage Bin, with blowline intake, two discharge augers, venting unit to top, hooped steel access ladder, bridge platform to adjoining silo, ...
Approx. 22 Cage Trolleys, each approx. 650mm x 350mm x 1.1m deepPlease read the following important notes:- Purchasers will be given assistance wi...
Bunded Steel Storage Tank, overall tank size approx. 3.5m x 1.5m x 2m deep, with delivery pump, meter and hose in steel housing to onePlease read ...
Flamco Expansion Vessel, approx. 800mm x 700mm deepPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EX...
FlowServe Blow Down Vessel, serial no. 11523, year of manufacture 2009, 4.81m³ cap, approx. 1.6m dia. x 1.1m deep, with immediate valves and pipin...
Cyclone Receiver, with geared motor driven rotary air seal and steel framePlease read the following important notes:- ***Overseas buyers - All lot...
Geared Motor Driven Rotary Air (understood to be unused), with intake approx. 400mm x 220mmPlease read the following important notes:- ***Overseas...
Single Door Steel Control PanelPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At the close ...
Lime Silo Control CabinetPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At the close of the...
AMD Friulair Air CoolerPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At the close of the t...
Five Hopper Bottomed Tote Bins, approx. 1285mm x 1285mm x 1950mm. Lot located Bretherton, Lancashire. Lot loaded free of charge onto purchasers tr...
Five Hopper Bottomed Tote Bins, approx. 1285mm x 1285mm x 1950mm. Lot located Bretherton, Lancashire. Lot loaded free of charge onto purchasers tr...
Door Control Panel (for Filter Unit & Associated Equipment)Please read the following important notes:- ***Overseas buyers - All lots are sold Ex W...
Door Control Panel (for Filter Unit & Associated Equipment)Please read the following important notes:- ***Overseas buyers - All lots are sold Ex W...
Five Hopper Bottomed Tote Bins, approx. 1285mm x 1285mm x 1950mm. Lot located Bretherton, Lancashire. Lot loaded free of charge onto purchasers tr...
Five Hopper Bottomed Tote Bins, approx. 1285mm x 1285mm x 1950mm. Lot located Bretherton, Lancashire. Lot loaded free of charge onto purchasers tr...
TEN HOPPER BOTTOMED TOTE BINS, approx. 1285mm x 1285mm x 1950mm. Lot located Bretherton, Lancashire. Lot loaded free of charge onto purchasers tra...