*Ford Transit Custom (white) 270 L1 2.2 TDCi 125PS Reg: YW15 FZ, Mileage: 118,915, Fitted with a Rhino Roof Rack

*Iveco Daily 5ton 180 Auto Tipper, Reg: NX18 OMA, 3810 engine hours, Mileage 126,911

*Renault Traffic 115dci Reg: HV65 GOA

*Ford Transit Mini-Bus, REG: EG16 ZWD 2198cc 410 Trend Econetictech - SAT NAV/ AC/ Electric Drivers Seats, Heated Front Seats, Heated Screen, Rear...

*Ford Transit Custom (white) 270 L1 2.2 TDCi 125PS Reg: YY64 0GX, Mileage: 127608, Fitted with a Rhino Roof Rack

*Mercedes Benz Atego 816 Blue Tech 4 Flatbed Lorry, with Terex Atlas 36.2K Crane, Reg: YX56 AMV, Mileage; 438910km (~272726 miles)

*Mercedes Benz C-Class C250d Auto (grey) Reg: YY65 0PZ, Mileage: 135000, Leather Interior, Alloy Wheel, Sat Nav, Cruise Control, Sun Roof, Heated ...

*Hangha XF35d Forklift (orange) with Cab Side Shift Digital Display - Collection to be arrange by appointment

*Technical Crane Ltd 3 Ton Overhead Gantry Crane, Crane No.11955b, ~8m Span and ~21m of Track and Buzz Bar, 415v Supply (buyer to dismantle/remove...

*Technical Crane Ltd 3 Ton Overhead Gantry Crane, Crane No.11955a, ~6m Span, and ~18m of Track and Buzz Bar, 415v Supply (buyer to dismantle/remov...

*Asquith Radial Arm Drill, Model 4-6ODL113015, Year of Manufacture: 1926, 415v Supply, with Drill Bed and Clamps (buyer to dismantle/remove, deliv...

*Meyer Model No. SR35A Pillar Dill Fitted with Drilling Vice and Automatic Drill Drive, Serial No. E05016, Max Drill Capacity 35mm (buyer to disma...

*Geka Hydro Crop 110A Pedal Driven Punch and Guillotine, Serial No. 102794, Year of Manufacture: 2011 (buyer to dismantle/remove, delivery is not ...

*Kingsland 50P Pedal Driven Hydraulic Punch Serial No. 115305 (buyer to dismantle/remove, delivery is not available for this lot)

*Bucket Containing Punches Suitable for Lots 11 and 12

*Bomar Horizontal Band Saw, Year of Manufacture: 2007, Serial No. 101 (buyer to dismantle/remove, delivery is not available for this lot)

*Trolley Containing a Set of Steel Banding Equipment Including Crimpers and Tools etc.

*Set of Four Rollers ~1.7m long 0.5m wide 0.9m high (delivery is not available for this lot)

*Set of Ten Rollers ~2.8m long, 0.5m wide, 0.9m high (delivery is not available for this lot)

*Set of Seven Rollers ~2.3m long, 0.5m wide, 1m high (delivery is not available for this lot)

*Four Sledgehammers, Two 5ft Crowbars, One 3ft Crowbar, Three 2ft Crowbars, and Three Large Steel Wedges

*Five Lengths of Track Burning Gear Cutter Track (various lengths)

*Bench Fitted Flat Bar Bender

*Two Cutting Torches, Track Cutter, and Several Lengths of Oxygen and Fuel Cutting Hose Bagging

*3ft Set Square

*Box Containing Various Hand Tools, Two Grease Guns, Levels, Tape, etc.

*Box Containing Three Tap Spanners, Automatic Tapping Chuck, Drill Bits, and Taps

*Evolution Circular Saw Suitable for Woodwork, 9" Cutting Disc Model EVO230

*Box Containing Bandsaw Blade Suitable for Lot 14 2.9m long 4mm thick 7mm wide

*Box Containing a Quantity of Magnetic Drill Cutters and Pins

*Rigid No.25 Pipe Vice

*Record No.25 Bench Vice

*110v Four-Way Splitter Box and Four-Way Splitter Cable

*Two First Aid Kits

*Telescopic Tripod

*Telescopic Tripod

*Telescopic Tripod

*Large Fire Blanket

*Datum Theodolite

*Datum NA20 Dumpy Level

*Laser Alignment by Leica Geo Systems Dumpy Level Serial No. 007279

*Box Containing SDS and Hilti Drill Attachments

*Milwaukee Fuel 1/2" Drive Impact Gun with 5am M18 Li-Ion Battery

*Milwaukee Fuel 1/2" Drive Impact Gun with 5am M18 Li-Ion Battery

*Milwaukee 5am M18 Li-Ion Battery with M12/18 Charger

*Makita 3/4" Drive Impact Gun 115v

*Box Containing Large Morse Taper Drill Bits and Chucks Suitable for Morse Taper Drills

*P+P NRG Absorber System Model EN355 Suitable for Climbing Harness

*Makita 110v SDS Impact Drill with Drill Bits

*Action Ram 700cc HHB700 Hydraulic Jack with 50mm Bottle Jack including Electrical Foot Switch

*Record Steel 35 Vice

*Box Containing Various Cutting and Grinding Disc Suitable for 9" Grinder

*Bucket of Various MMA Welding Rods

*Bucket of Various Cutting and Grinding Discs Suitable for 5" and 9" Grinders

*Box of 7" and 12" Cutting Discs, and 4.5" Grinding Wheels, New Stick Welder Probe, Gauntlets, etc.

*Bernard Industrial Mig Gun (new in box)

*Three Boxes of Sealed MMA Welding Rods (various sizes)

*Quantity of Mixed Steel Letter and Number Stamps

*Quantity of PPE, Abrasive Wheels, Base Drill Cutters, and Welding Rods

*Hilti AQ125-13S 5" Grinder 110v