IMPORTANT INFORMATION - Please Note: The Majority of the Lots Will Be Dismantled and Loaded Onto Purchasers' Transport Free of Charge (unless o...

Hosokawa Alpine TYPE AFG200 JET MILL PLANT, serial no.1599, year of manufacture 1986, with Plusair CS75 package air compressor, vacuum pump, contr...

Classifier Wheel (understood to be stainless steel - suitable for lot 1) approx. 113mm dia. x 87mm overall ...[more]

Ceramic Classifier Wheel (suitable for lot 1) approx. 108mm dia. x 88mm overall ...[more]

Steel Classifier Wheel (suitable for lot 1) approx. 111mm dia. x 88mm overall ...[more]

Steel Classifier Wheel (suitable for lot 1) approx. 111mm dia. x 88mm overall ...[more]

William Boulton 60in dia. STAINLESS STEEL VIBRO ENERGY MILL, with stand and control panel (lot situated at Olivers Mill, Newport Lane, Stoke-on-Tr...

Chemically Resistant Centrifugal Extraction Fan, 0.75kW, approx. 310mm intake, 300mm x 240mm delivery ...[more]

Hobart Model A200 Planetary Mixer, serial no. 11-274-897, 415V ...[more]

Hobart Model A120 Planetary Mixer, serial no. 97-032-680, 240V ...[more]

Three Whisk Attachments ...[more]

Steel Framed Mobile Stainless Steel Top Bench, approx. 900mm x 600mm x 620mm high ...[more]

Baxter JAW CRUSHING PLANT, approx. 400mm x 150mm, with infeed stand and canopy, stainless steel cased 100mm wide cleated belt infeed conveyer, 2.5...

Eight Assorted Double Diaphragm Pumps, mainly 1in ...[more]

Two x 1,250L Fibreglass Liquid Storage Containers, approx. 1220mm x 1140mm, with steel frames and fork lift channels, approx. 1980mm high, 1270mm ...

Two x 1,250L Fibreglass Liquid Storage Containers, approx. 1220mm x 1140mm, with steel frames and fork lift channels, approx. 1980mm high, 1270mm ...

Two x 1,250L Fibreglass Liquid Storage Containers, approx. 1220mm x 1140mm, with steel frames and fork lift channels, approx. 1980mm high, 1270mm ...

One x 1,250L Fibreglass Liquid Storage Container, approx. 1220mm x 1140mm, with steel frame and fork lift channels, approx. 1980mm high, 1270mm x ...

One x 1,250L Fibreglass Liquid Storage Container, approx. 1220mm x 1140mm, with steel frame and fork lift channels, approx. 1980mm high, 1270mm x ...

One x 1,250L Fibreglass Liquid Storage Container, approx. 1220mm x 1140mm, with steel frame and fork lift channels, approx. 1980mm high, 1270mm x ...

One x 1,250L Fibreglass Liquid Storage Container, approx. 1220mm x 1140mm, with steel frame and fork lift channels, approx. 1980mm high, 1270mm x ...

800L STAINLESS STEEL RIBBON MIXER, with 5.5kW motor gearbox, approx. 500kg cap., approx. 1.9m x 600mm x 750mm deep on body, with stand and stainle...

Bricesco MESH BELT ELECTRIC FURNACE, currently dismantled, approx. 900mm x 200mm on internal cavity, (installed power - understood to be 300kW/950...

Nickel Alloy Mesh Belt, approx. 780mm wide (understood to be suitable for lot 10) ...[more]

Cone Mixer, approx. 350mm dia. x 600mm deep, with hand slide discharge ...[more]

Eight Mixed Motor Gearboxes, five x 0.75kW, one x 0.22kW and two x 0.37kW ...[more]

Screw Auger, 4.4m long. 150mm internal dia., with mobile frame, Brook Crompton 3kW motor and gearbox ...[more]

Vibratory Discharge Stand, fitted electro magnet, vibratory motor and mobile stand ...[more]

ADDITIONAL LOT - Hyster 1.5t Cap. Battery Electric Fork Lift Truck, 48v, 4.33m max lift height, with duplex mast 2.72m high and sideshift, 3 phase...

William Boulton 48in dia. STAINLESS STEEL DOUBLE DECK SCREEN, with stainless steel contact parts and two mesh frames ...[more]

Komatsu FD20T DIESEL FORK LIFT TRUCK, 2000kg cap., serial no. 30011, indicated hours 3332 (at time of listing), with triplex mast approx. 2.1m hig...

Bolted Sectional Steel Framed Wire Mesh Mill Cage, approx. 2.8m x 920mm x 2.2m high ...[more]

Isopad Isodrum FIDR/200 Electric Drum Heater, with heated base, approx. 640mm dia. x 900mm deep (internal) ...[more]

Torrance HYDRAULIC DISPERSION MIXER, with heated stainless steel mixing vessel, approx. 900mm dia. x 850mm deep, electric water heater unit ......

Bohlin CV050 Rheometer / Viscometer, serial no. 01/00667/CUR/A/002 with two Peltier E.boxes ...[more]

Denco SN 1.7 N Compressed Air Dryer, serial no. 03C0073, year of manufacture 2003, 240V, 16 bar max ...[more]

Wurzburg 3000 PSI Easy Start Gasoline High Pressure Washer, with Wurzburg CX200 Electronic Ignition, 6.5hp (unused) ...[more]

Wurzburg W8500 Gasoline Generator 220V/380V, 50Hz (unused) ...[more]

Eiger Torrance ABM40.M.FLP. BEAD MILL, serial no. 11143, 415v, 30kW, 50Hz, with flame proof control panel ...[more]

Atlas Copco Compressor, 230V, 50Hz, 1.5kW, 90 litre cap. (will not power up – known to require attention) ...[more]

Kohler ULTRA JET 200W UV BELT DRYER, serial no. 2014, indicated hours 01082 (at time of listing) approx. 200mm x 1.9m centres on belt, 35mm high a...

Je-ma Chain & Flight Elevayor, 5m long, 110mm flight width, with two way splitter discharge ...[more]

Mobile Barrel Truck ...[more]

I&P Lifting Gear 1000kg SWL Fork Lift Beam ...[more]

Cox Type 306 300 Range Triple Roller Mill, serial no. B8602B, 24in wide on rolls (requires attention to blades) (lot situated at Olivers Mill, New...

Triple Roller Bench Mill, 5 3/8in wide on rolls (requires attention to blades) (lot situated at Olivers Mill, Newport Lane, Stoke-on-Trent, Staffo...

Marchant Triple Roller Mill, machine no.GG26.16.472,12in wide on rolls (requires attention to blades) (lot situated at Olivers Mill, Newport Lane,...

Cox Type 156 Pilot Major Treble Roll Mill, serial no. B9317, 15in wide on rolls (requires attention to blades) (lot situated at Olivers Mill, Newp...

Marchant Triple Roll Mill, 11 ½in wide on rolls (requires attention to blades) (lot situated at Olivers Mill, Newport Lane, Stoke-on-Trent, Staffo...

Triple Mill Roll, 4 ¾in wide on rolls (requires attention to blades) (lot situated at Olivers Mill, Newport Lane, Stoke-on-Trent, Staffordshire, S...

Triple Roll Mill, 12in width on rolls (no electric motor drive) (requires attention to blades) (lot situated at Olivers Mill, Newport Lane, Stoke-...

Hobart PLANETARY MIXER, with gated paddle and hook attachments, 50 litre cap., three phase (lot situated at Olivers Mill, Newport Lane, Stoke-on-T...

Winkworth BU9SS STAINLESS STEEL TWIN Z-BLADE MIXER, serial no. 4427 D2 (requires attention to blades) (lot situated at Olivers Mill, Newport Lane,...

Electric Kiln, three phase, 1300°C, approx. 540mm x 390mm x 650mm high (internal measurements) ...[more]

Liquids Mixer, with stainless steel stirrer, control panel and inverter, approx. 100 litre cap., on mobile stand ...[more]

Skid Mounted Bead Mill, with stainless steel agitated hopper, heat exchanger, peristaltic pump, 18kW motor and control panel ...[more]

Steel-Shaw Ceramic Lined Ball Mill, approx. 650mm x 600mm, three phase, 2hp motor, with stand ...[more]

BT Hand Hydraulic Pallet Truck, approx. 670mm x 1m on forks (requires attention to blades) (lot situated at Olivers Mill, Newport Lane, Stoke-on-T...

Eirich OBG21 Pan Mixer, serial no. 9271, with alloy pan, approx. 1m x 360mm deep (requires attention to blades) (lot situated at Olivers Mill, New...

Russell A152 50 GAL 50in x 30in Stainless Steel Adjustable Angle Vibratory Screen, serial no. RMU 688, with stand (lot situated at Olivers Mill, N...