Galvanised Steel Roller Shutter Door, approx. 4.65m wide, with rails as set out. Item located in Alford Lincolnshire. Free loading onto purchasers...

Galvanised Steel Roller Shutter Door, approx. 5.9m wide, (known to be incomplete), with equipment as set out. Item located in Alford Lincolnshire....

Steel Ladder, approx. 3.1m high. Item located in Alford Lincolnshire. Free loading onto purchasers transport

Westrup S1.50 GRAIN CLEANER, serial no. 82046. Item located in Alford Lincolnshire. Free loading onto purchasers transport

Partial Hooped Steel Access Ladder, 1.9m high on ladder. Item located in Alford Lincolnshire. Free loading onto purchasers transport

Staircase, with six treads. Item located in Alford Lincolnshire. Free loading onto purchasers transport

Hooped Steel Access Ladder, 1.1m high on ladder. Item located in Alford Lincolnshire. Free loading onto purchasers transport

Ten Lengths of Galvanised Steel 700mm dia. Ducting, each length approx. 2m long. Item located in Alford Lincolnshire. Free loading onto purchasers...

Assorted Galvanised Steel Ducting, as set out, mainly 240mm dia. . Item located in Alford Lincolnshire. Free loading onto purchasers transport

Cyclone Receiver, approx. 1500mm dia. x 3m deep. Item located in Alford Lincolnshire. Free loading onto purchasers transport

Cyclone Receiver, approx. 1.4m dia. x 3.3m deep. Item located in Alford Lincolnshire. Free loading onto purchasers transport

Six Elevator Leg Sections, each approx. 370mm x 270mm x 2.44m long. Item located in Alford Lincolnshire. Free loading onto purchasers transport

Four Assorted Storage Bins/ Hoppers, up to 750mm x 950mm x 2.1m deep. Item located in Alford Lincolnshire. Free loading onto purchasers transport

HORIZONTAL DISH ENDED STORAGE TANK, approx. 2.5m long x approx. 2.8m dia., understood to store soya oil, with intake pipe. Item located in Alford ...

VERTICAL WELDED STEEL STORAGE TANK, approx. 2.5m dia. x 8m deep, with insulated cladding, intake pipe, partial hooped steel access ladder and two ...

Loading Bucket, 1.8m wide (understood to be suitable for JCB Loadall). Item located in Alford Lincolnshire. Free loading onto purchasers transport

Multimate 4ft Crane Jib, understood to be suitable for JCB Loadall, 1000kg cap. Item located in Alford Lincolnshire. Free loading onto purchasers ...

Single Tine Lifting Attachment, understood to be suitable for JCB Loadall. Item located in Alford Lincolnshire. Free loading onto purchasers trans...

100mm dia. Geared Motor Driven Blowing Seal. Item located in Alford Lincolnshire. Free loading onto purchasers transport

Wade SR044-14256 Blower, serial no. 2966, with 15kW electric motor, 2900rpm. Item located in Alford Lincolnshire. Free loading onto purchasers tra...

Briton 300mm dia. Rotary Air Seal, with gear box. Item located in Alford Lincolnshire. Free loading onto purchasers transport

Briton 290mm x 290mm Geared Motor Driven Rotary Air Seal. Item located in Alford Lincolnshire. Free loading onto purchasers transport

Geared Electric Motor. Item located in Alford Lincolnshire. Free loading onto purchasers transport

470mm x 200mm Alloy Vibratory Feed, with control. Item located in Alford Lincolnshire. Free loading onto purchasers transport

Centrifugal Fan, with 15kW electric motor, Item located in Alford Lincolnshire. Free loading onto purchasers transport ...[more]

Miracle Mills 2GD No2 Hammer Mill , serial no. 300.1.11, plant no. unknown, year of manufacture 1997, dimensions approx. -, capacity -, free loa...

Redler En Masse 475mm Chain & Scraper Conveyor, with geared electric motor and discharge outlet, serial no. 366307, plant no. unknown, year of man...

150mm Wide Screw Conveyor, with direct drive electric motor, serial no. unknown, plant no. unknown, year of manufacture unknown, dimensions approx...

DCE UMA 458 G12 Dust Extraction Unit, 415v, 11kW, serial no. 614408, plant no. unknown, year of manufacture unknown, dimensions approx. -, capacit...

Ingersoll Rand HDE LFD 22 Screw Compressor, with 18.5kW, three phase electric motor and control panel, serial no. unknown, plant no. unknown, year...

Buhler 125mm Chain & Flight Conveyor. with geared electric motor, three discharge outlets and two electro pneumatic slides, serial no. 10075006, p...

Twin Leg Bucket Elevator, metal buckets 6" wide, serial no. unknown, plant no. unknown, year of manufacture unknown, dimensions approx. approx. 8....

Twin Screw Feeder, for bagging, serial no. unknown, plant no. unknown, year of manufacture unknown, dimensions approx. -, capacity -, free loading...

Belt Weigher, consisting of platform to sit up to 10 tote boxes, with belt underneath mounted on load cells, material is discharged onto the belt ...

Flaking Mill (believed to be Turner), electric motor, feed roll with electric motor, serial no. unknown, plant no. unknown, year of manufacture un...

Flaking Mill (believed to be Turner), electric motor, feed roll with electric motor, serial no. unknown, plant no. unknown, year of manufacture un...

Cooling Chain & Scraper Conveyor, with two extractor fans, fines discharge auger, automated switch over at discharge point and access steps, seria...

Two Stainless Steel Steam Conditioning Augers, with electric motor drive, electronic overload control, entry and exit hoppers, serial no. unknown,...

Bradlee Gas-Fired (LPG) 518lbs/hr Steam Boiler, with water softener, serial no. unknown, plant no. unknown, year of manufacture unknown, dimension...

Control Panel, serial no. unknown, plant no. unknown, year of manufacture unknown, dimensions approx. -, capacity -, free loading onto purchasers ...

COMBINATION LOT - LOTS 310 - 315 OFFERED FOR SALE AS A ONE LOT CONTRACT (please note - the final highest bid on this lot will only be accepted if ...

Spares for Flaking Mill (Including one roll in photos but excluding pairs of rolls)., serial no. unknown, plant no. unknown, year of manufacture u...

Pair of Replacement Flaking Rolls , serial no. unknown, plant no. unknown, year of manufacture unknown, dimensions approx. 760mm x 450mm, capacity...

Pair of Replacement Flaking Rolls , serial no. unknown, plant no. unknown, year of manufacture unknown, dimensions approx. 760mm x 450mm, capacity...

Pair of Replacement Flaking Rolls , serial no. unknown, plant no. unknown, year of manufacture unknown, dimensions approx. 760mm x 450mm, capacity...

Charvet Pro. G1MF159CD-C Gas Heated Stainless Steel Cooking Pan, with valved outlet, serial no. unknown, plant no. n/a, year of manufacture unknow...

Charvet Pro Gas Heated Square Pan, with tilting mechanism, serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions approx. 1m x...

12 Endress and Hauser Assorted Flow Meters and Level Switches, serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions approx. ...

Endress and Danfos Assorted Flow Meters, serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions approx. 1200mm x 1100mm x 500m...

APV Agitator, c/w 0.75kW drive, serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions approx. 400mm x 1200mm x 400mm, 1220mm ...

Trans-Chem Geared Agitator, 0.37kW motor, serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions approx. 400mm x 1400mm x 400m...

Lightnin Type LL25 Agitator, 0.25kW, flange mounted, serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions approx. 400mm x 4...

Morstan Clamp, on agitator, 0.55kW drive, serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions approx. 400mm x 400mm x 900m...

Fenner Series M Agitator, 0.33kW geared drive, 340 rpm, serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions approx. 400mm x...

Lightnin Geared Agitator, 0.25kW drive, flange mounted (no shaft), serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions appr...

Lightnin Model P25A Air Driven Agitator (no shaft), serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions approx. 200mm x 200...

Morstan Clamp, agitator geared drive head (no shaft), model PG121 C/S, serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions...

Lightnin Model P25 Drive Head Bolt, 0.25kW motor (no shaft) , serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions approx. 2...

Brown Pestal Bolt on Geared Agitator, with stainless steel shaft, serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions appr...

Greaves FPGD-1/2 Clamp, on agitator geared head (no shaft) 0.5hp, serial no. unknown, plant no. n/a, year of manufacture unknown, dimensions appro...