Click here to download a copy of the Online Aution Catalogue A sole principal contractor will be appointed to remove ALL of the fixed plant and ...

Ansaldo GSCR 1120 Y4 3 PHASE SYNCHRONOUS GENERATOR, with Flender-Graffen Staden TX56/2 gear box, Greens TEI turbine steam surface condenser, turbi...

GALVANISED STEEL PORTAL FRAMED BUILDING, approx. 23.7m x 13.5m x 11m high to eaves (reserve removal until generator etc removed), with roller shut...

Street 30 tonne cap. TWIN GIRDER TRAVELLING OVERHEAD CRANE, approx. 12m span, fitted 2 tonne cap. auxiliary hoist, remote control, with galvanised...

COMBINATION LOT - Lots 2 to 3 offered for sale as a one lot contract - please note – the final highest bid on this lot will only be accepted if th...

HRSG CHIMNEY STACK, approx. 4.2m dia. x 30m high, with insulated galvanised steel claddingPlease read the following important notes:-***All lots a...

Steel Cargo Container (former Stores), 12m long, with steel racking throughout (upper container – excluding staircase) (There will be a removal/ l...

Steel Staircase (to upper storage container), 2.74m high to platform (There will be a removal/ loading charge of £40 + VAT for this lot, payable b...

Portable Jackleg Office Building, 9.5m long x 3m wide, with internal partitioning forming toilet, with two air conditioning units and sink (There ...

Portable Jackleg Office Building (upper building), 9.5m long x 3m wide (known to require attention), with internal partitioning forming kitchen an...

York HEJB12FS-AAR Outdoor Condenser Unit (There will be a removal/ loading charge of £10 + VAT for this lot, payable before collection & payable d...

Clarke Strong-Arm CFC 1,000kg cap. Mobile Floor Crane, serial no. 11H (There will be a removal/ loading charge of £20 + VAT for this lot, payable ...

Two Multi-Tier Steel Framed Battery Charging Racks, each approx. 2.4m x 490mm x 1.7m high (There will be a removal/ loading charge of £20 + VAT fo...

Steel Framed Battery Charging Rack, approx. 3.14m x 750mm x 1.25m high (There will be a removal/ loading charge of £20 + VAT for this lot, payable...

Godwin 125-80-260 DIESEL ENGINE EMERGENCY FIRE WATER PUMP, serial no. S13249, year of manufacture 1998, 2000DM3/min, 00120 indicated hours (at tim...

SPP KM08E Fire Water Pump, serial no. 1846032/1A, 33.34L/S cap., with Weg 45kW electric motor, pump approx. 120mm dia. intake, approx. 90mm dia. d...

Lowara 3SV12T011T/D Multi-Stage Pump, code 1016LC520, with electric motor drive (There will be a removal/ loading charge of £20 + VAT for this lot...

Two approx. 200mm dia. Hand Gate Valves (There will be a removal/ loading charge of £100 + VAT for this lot, payable before collection & payable d...

BOLTED MODULAR ALLOY WATER STORAGE TANK, approx. 6.7m x 6.7m x 5m high, with galvanised steel support channels and bolted galvanised steel framed ...

Strong Pumps Ltd HGTI-150 Centrifugal Pump, serial no. S523242B, with fitted Clarke Detroit DDFP-T3DI diesel engine, serial no. 3D-300684, 175bhp ...

W.H. Dorman & Co 4BKII Four Cylinder Diesel Engine, serial no. 67302 Vendors comments - formerly installed as part of a back up generator in a lig...

Deluge Valve Cabinet (Auxiliary), approx. 1.3m x 600mm x 2.4m high, with equipment throughout (There will be a removal/ loading charge of £250 + V...

Elettromeccanica Tironi 2500kVA TRANSFORMER, serial no. E6592, year of manufacture 1998 (There will be a removal/ loading charge of £250 + VAT for...

Bowers 2500kVA Oil Cooled Transformer, serial no. TR50128, year of manufacture 2002 (There will be a removal/ loading charge of £250 + VAT for thi...

Five Tier Single Sided Stock Rack, approx. 1.9m high (excluding contents) (There will be a removal/ loading charge of £20 + VAT for this lot, paya...

Mattei AC30L PACKAGE AIR COMPRESSOR (no. 2 Air Compressor) (There will be a removal/ loading charge of £100 + VAT for this lot, payable before col...

Mattei OPTIMA 30 PACKAGE AIR COMPRESSOR (no. 1 Air Compressor) (understood to require attention) (There will be a removal/ loading charge of £100 ...

Atlas Copco Twin CD 100 Air Dryer (no. 2 dryer), serial no. 10768/9, year of manufacture 1998, with three Atlas Copco filters (There will be a rem...

Atlas Copco Twin CD 100 Air Dryer (no. 1 dryer), serial no. 10768/9, year of manufacture 1998, with three Atlas Copco filters (There will be a rem...

Abbott Vertical Welded Steel Air Receiver, serial no. A43425, year of manufacture 1998, approx. 750mm dia. x 1.7m high (There will be a removal/ l...

Three Rise Step Ladder (There will be a removal/ loading charge of £10 + VAT for this lot, payable before collection & payable direct to the sole ...

Double Sided Mobile Louvred Panel Rack (There will be a removal/ loading charge of £10 + VAT for this lot, payable before collection & payable dir...

Phoenix Safe Castille 6 Series Double Door Fire Safe, approx. 900mm x 570mm x 1.8m high (locked, no key available) (There will be a removal/ loadi...

Bunded Stand, approx. 1.66m x 1.25m (There will be a removal/ loading charge of £10 + VAT for this lot, payable before collection & payable direct...

Brooks Bunded Sodium Hypochlorite Storage Tank, approx. 2.6m dia. x 4.3m deep overall (There will be a removal/ loading charge of £200 + VAT for t...

Galvanised Steel Access Platform, approx. 900mm x 900mm x 1.25m high to platform (There will be a removal/ loading charge of £30 + VAT for this lo...

Pumptec PE10884 MAIN COOLING WATER PUMP, approx. 440/ 350mm dia. intake/ delivery, with electric motor drive understood to be 185kW and steel base...

Pumptec PE/09/43 MAIN COOLING WATER PUMP, approx. 430/ 350mm dia. intake/ delivery, with Brook Crompton Parkinson 7-AD355S 185kW electric motor, 9...

COOLING WATER FILL PUMP, with electric motor drive (valves excluded) (There will be a removal/ loading charge of £250 + VAT for this lot, payable ...

Seven Assorted Valves, up to approx. 400mm dia. (There will be a removal/ loading charge of £250 + VAT for this lot, payable before collection & p...

Galvanised Steel Pedestrian Bridge, 700mm wide x approx. 950mm height clearance (There will be a removal/ loading charge of £20 + VAT for this lot...

Chem Resist BUNDED SULPHURIC ACID STORAGE TANK, working volume 3,300 litres, year of manufacture Feb 2018, overall size approx. 2.1m dia. x 3.7m h...

4,300 litre max. cap. Storage Tank, approx. 1.8m dia. x 1.8m deep, with tank level indicator (There will be a removal/ loading charge of £50 + VAT...

Chemiguard Optima Securibox Sampling Unit (There will be a removal/ loading charge of £20 + VAT for this lot, payable before collection & payable ...

Morgan CD Dosing Cubicle, approx. 1.85m x 1.85m x 2.12m high, with residual equipment inside (There will be a removal/ loading charge of £30 + VAT...

Rotork IQS12 Actuator (There will be a removal/ loading charge of £50 + VAT for this lot, payable before collection & payable direct to the sole p...

Rotork IQS12 Actuator (There will be a removal/ loading charge of £50 + VAT for this lot, payable before collection & payable direct to the sole p...

EFFLUENT NEUTRALISATION TANKS & EQUIPMENT, on concrete plinth (There will be a removal/ loading charge of £50 + VAT for this lot, payable before c...

Flammables Storage Cabinet, approx. 3m x 1.6m x 3.1m high overall (There will be a removal/ loading charge of £20 + VAT for this lot, payable befo...

Three Bunded Stands, each approx. 1.25m x 1.25m (two missing grids) (There will be a removal/ loading charge of £10 + VAT for this lot, payable be...

Morgan Water Monitoring Cubicle, approx. 1.96m x 1.75m x approx. 2.2m high, with equipment inside (There will be a removal/ loading charge of £30 ...

Morgan Analyse Cabin, approx. 2m x 1.25m x 2.25m high, with residual equipment including Endress + Hauser stamolys CA71CL free chlorine analyser a...

Water Pump, with 7.5kW electric motor (There will be a removal/ loading charge of £30 + VAT for this lot, payable before collection & payable dire...

Water Pump, with 7.5kW electric motor (There will be a removal/ loading charge of £30 + VAT for this lot, payable before collection & payable dire...

Cetetherm CETEPLATE HRSCT 240-MP8-101 PLATE HEAT EXCHANGER, serial no. C12642-2, with four valves (There will be a removal/ loading charge of £100...

Cetetherm CETEPLATE HRSCT 240-MP8-101 PLATE HEAT EXCHANGER, serial no. C12642-1, year of manufacture 1998, with four valves (There will be a remov...

Weir HC150-125-250 Centrifugal Pump, serial no. 59788-803, with 15kW electric motor and two valves (There will be a removal/ loading charge of £40...

Weir HC150-125-250 Centrifugal Pump, serial no. 32226333.01.001, with 15kW electric motor and two valves (There will be a removal/ loading charge ...

Double Sided Eight Bottle Air Cylinder Stand (There will be a removal/ loading charge of £10 + VAT for this lot, payable before collection & payab...

Alpha Laval M10-BFM Plate Heat Exchanger, serial no. 30102-24299, year of manufacture 1998, volume 83.8L (There will be a removal/ loading charge ...