Refine your search
Primary Category
Category
- Auto Parts & Accessories (7)
- Trucks & Trailers (6)
- General collective (3)
- Tools (3)
- Forklifts (2)
- Printers & Copiers (2)
- Welders (2)
- Cars (1)
- Classic Cars (1)
- Compressors (1)
- Drilling & Doweling Machines (1)
- Fitness & Sports Equipment (1)
- Motorbikes (1)
- Other Industrial Supplies & Equipment (1)
- Phones (1)
- Portable Buildings (1)
- Presses (1)
- Small Plant & Tools (1)
- Vans & Commercial Vehicles (1)
Brand
Item Type
- Recovery Truck (4)
- Tool (4)
- Tools and Accessories (4)
- Truck (4)
- Photographs (3)
- Vehicle Lift (2)
- Welder (2)
- Air Compressor (1)
- Air Receiver (1)
- Air Receiver Tank (1)
- Car Parts (1)
- Compressor (1)
- Drill (1)
- Hand Tool (1)
- Headlamp (1)
- Headlamp Aligner (1)
- Jack (1)
- MIG Welder (1)
- Motorbike (1)
- PPE (1)
- Pillar Drill (1)
- Press (1)
- Probe (1)
- Ramp (1)
- Receiver (1)
- Scanner (1)
- Skate (1)
- Socket (1)
- Socket Set (1)
- Space Heater (1)
- Spanners (1)
- Tool Bag (1)
- Transit (1)
- Trolley (1)
- Trolley jack (1)
- Van (1)
- Wheel (1)
- Wheel Balancer (1)
- List
- Grid
-
37 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any enquiries.
SPECIAL NOTICE 1. Please note this sale is By Order of the Director Pending the Appointment of a Liquidator 2. Please Refer to our Terms and Condi...
Renault Midlum 220 12T car transporter with J&J Conversions slide and tilt recovery body (with
Renault Midlum 220 12T car transporter with J&J Conversions slide and tilt recovery body (with remote) and spec frame, Registration Number RX06 HP...
Renault Midlum 180 based recovery truck with J&J Conversions slide and tilt bed and winch Registration Number WX06 FLJ, approx 1.8 million kms rec...
Renault Midlum 180 based recovery truck with J&J Conversions slide and tilt bed and winch Registration Number WX05 XRZ, approx 900,000 kms recorde...
Mitsubishi Canter 7C18 7.5 Ton recovery truck with J&J Conversions Tilt and Slide body and winch,
Mitsubishi Canter 7C18 7.5 Ton recovery truck with J&J Conversions Tilt and Slide body and winch, Registration Number HY10 UAU, approx 500,000 kms...
Nissan NV400 flatbed recovery truck with ramp, Registration Number BV16 SFE, c. 335,000 miles recorded, Mot until 30th June 2024, Runs but engine ...
Ford Transit 85 T260S FWD Recovery Van with rear mounted recovery dolly and workshop configuration, Registration Number YT59 YPZ, Approx. 234,000 ...
Quantity of part worn/scrap tyres, Various Sizes plus 11 : Various Motorbike tyres, As lotted per
Quantity of part worn/scrap tyres, Various Sizes plus 11 : Various Motorbike tyres, As lotted per photographs. The winning bidder will need to rem...
Tecalemit SF9010/32 3,200 kg capacity two post vehicle lift, Serial Number 612056 (2018), Electrical
Tecalemit SF9010/32 3,200 kg capacity two post vehicle lift, Serial Number 612056 (2018), Electrical Disconnection required by a competent person....
Tecalemit SF9010/32 3,200 kg capacity two post vehicle lift, Serial Number 612056 (2018), Electrical
Tecalemit SF9010/32 3,200 kg capacity two post vehicle lift, Serial Number 612056 (2018), Electrical Disconnection required by a competent person....
Unite U-820 digital wheel balancer, serial number P10544, 240V, Please note there are no lifting
Unite U-820 digital wheel balancer, serial number P10544, 240V, Please note there are no lifting facilities on site.
Clarke piston type air compressor with floor mounted air receiver tank, Please note there are no
Clarke piston type air compressor with floor mounted air receiver tank, Please note there are no lifting facilities on site
Unite Pro UP650 tyre changing machine, model ZH650 RA, YOM 2015, Please note there are no lifting
Unite Pro UP650 tyre changing machine, model ZH650 RA, YOM 2015, Please note there are no lifting facilities on site.
3 tier tyre rack and contents to include approx. 40 : Various New/Part Worn tyres as per photographs. Please note there are no lifting facilities ...
Rack and contents to include 14 : Various Lucas alternators for models such as Chrysler Alpine, Ford
Rack and contents to include 14 : Various Lucas alternators for models such as Chrysler Alpine, Ford Granada, Sierra etc. Various QH branded water...
Crypton Headlamp aligner, Model unknown
OMCN 400kgs capacity engine support
Draper 300kg capacity engine support
Snap On Hand Held Scanner with cases and various cables, as lotted per photographs.
Mag Tools chest and contents, no key, as lotted per photographs, with Laser branded Tool bag and
Mag Tools chest and contents, no key, as lotted per photographs, with Laser branded Tool bag and socket set/spanners (part complete).
Sealey 10T hand operated bearing press
Mag Tools mobile chest, with contents as per photographs, No Key
BOC Automaster 185 mig welder, gas bottles excluded
Cebora mono welder, as lotted per photographs
Sealey 12 speed pillar drill, YOM 2000, no plug – spares or repairs
Sealey 5 ton hydraulic trolley jack, as lotted
RAASM oil recouperation tank, As lotted
2 : Unknown capacity support stands, as lotted per photographs
Unknown capacity support stand
Unknown height adjustable mobile support stand
2 : Low clearance steel checkerplate vehicle ramps, approx. 1.1m length
BMW/Mercedes Freewheeling Hub with bag, as lotted
Blue Point rotary surface prep tool with case
Power Probe Circuit tester with case
Loading...-
37 item(s)/page