- Ended 28 Jan 2020 15:55 GMT
- 10:00 GMT - 16:00 GMT
- Abercrombie Avenue
- High Wycombe
- HP12 3AZ
- United Kingdom
This auctioneer has chosen to not publish their results. Please contact them directly for any enquiries.
Elcon R-185 sliding wall saw, serial no: 9005128 (1990), 15' length x 7' height
Interwood twin-head 14" circular saw with DC brake, slifing table and dust extraction, 2.0m bed length x 1.4m width
Wadkin 10" AGS tilt arbor circular saw table, serial no: 687752 with DC brake
SIP 01924 1HP single bag dust collector, serial no: 47/2014 (2014) - 240v
Kity 613 vertical band saw, serial no: 1989-14424 with 12" throat
Hydrovane Compair packaged air compressor with integral dryer, serial no: 707-006094-6201 7.5kw 11 bar 22,256 hours
Rye DEB-E-52 twin PDE head horizontal boring machine, serial nos: 4308 and 4307, with DC brake, serial no: 2416-86 (1986)
Meddings Driltru pedestal drill, serial no: 22524 with 8" throat
Rye LS72 linear shaping machine with five pneumatic clamps, DC braking & sliding 12" table
Rye LS44 linear shaping machine, serial no: 116 with four pneumatic clamps & sliding 12" table
Balestrini FTA round end tenoner (no plate information) in acoustic cabinet
Wadkin Bursgreen 12BGP 12" panel saw, serial no: 701893 with sliding table & DC brake
Wadkin DR2445 heavy-duty vertical band saw with 28" throat, 32" x 34" table, serial no: 49430
Robinson twin-head spindle moulder with Holz-Her feeder, 36" x 60" table and DC brake (one head broken)
SCM T110A spindle moulder, serial no: AB.22039, ref. 120314
Interwood pedestal overhead router with 1m throat, H-shaped table and foot pedal
Balestrini Nova 3 double-sided round-end CNC tenoning machine, serial no: D.348.08 with Balestrini APPC removable automatic hopper feed, serial no...
Helma DRP2000 twin-head tenoner, serial no: 9518 (1985)
Zuckermann five-axis/six-head CNC routing machine with IBH Modus control, six-tool turret, 100 x 20cm table, dust extraction, guarding, compressor...
Danckaerts 14" rip saw, serial no: BC/N33, serial no: D304 on 29" x 41" sliding table with DC brake
Rye M/1 single-end boring machine, serial no: 286 on 12" x 18" table with clamp
Rye L/1 double end pneumatic boring machine with 25cm table, serial no: 106
Rye DT1 double round end sliding tenoning machine, serial no: 238
Cordwallis pneumatic twin-head saw, serial no: 843 with two 15" blades, sliding table and DC brake
Wadkin & Co BO117 surface planer, serial no: 4559, with 22" wide table
Weinig Quattromat Q23P through-feed four-head planer-moulder, serial no: 87735 (1999), (bottom motor away for rewinding)
Weinig Quattromat Q23P through-feed four-head planer-moulder, serial no: 92039 (2001)
Wadkin PU 701 5-head straight line edger, serial no: 36174 with chain conveyor through feed
Kupfermuhle Maschinenbau 24" overhead thickness planer, serial no: 8419 (1964) with upper/lower spindles and feed rollers (in acoustic cabinet)
Rye SB30 horizontal drilling machine, serial no: 2205
Balestrini Pragma 4 x 2 head multi-spindle slot mortiser, serial no: AF160 F10
Wadkin LS 2159 overhead router, serial no: 34196, with 24" throat
Record Power SM200 twin-head pedestal grinder, serial no: 052044 (2000)
Meddings Pacera floor-standing pedestal drill with 23" throat and 2' square table
Rye R80SM Speedmax profile shaping machine, serial no: 159/79 with 68" dia rotary table, two cutting heads, 12 x pneumatic clamps, 2 x sanding hea...
Rye R80E CSM MS profile shaping machine, serial no: 173-86 with 68" dia rotary table, 2 x cutting heads, 12 x pneumatic clamps, 2 x Rye BSA2 sandi...
Dexter heavy-duty band saw with 1.1m throat and DC brake (plate not accessible) Please note: a £500 deposit will be required for making good of fl...
Dexter heavy-duty band saw, serial no: 4269 with 1.1m throat and DC brake Please note: a £500 deposit will be required for making good of floor pi...
Dexter heavy-duty band saw, serial no: 1930 with 1.1m throat, no blade, and DC brake Please note: a £500 deposit will be required for making good ...
Interholz Raimann KS230 heavy duty through-feed edging saw, machine no: 24523, serial no: 91800 (1989) (decommissioned)
Samco EG pad sanding machine, serial no: 9110210 with 2.7m table, 18cm belt
Rye FDS1 twin-head pedestal linisher, serial no: 265 (no drums)
Eredi Galli Mario LVG 7" edge sander, serial no: 3280 with 84 x 35cm table
Rye twin end pedestal linisher, serial no: BS/2/163 with 6" x 7" rubber drums
Unbadged twin-end pedestal linisher with one 8" x 6" rubber drum linisher and one 'brush-back' sander head
Rye BS2 twin-end pedestal linisher, serial no: 186
Rye FD/1 twin-end pedestal linisher, serial no: 249 with two 6" x 8" rubber drums
Unbadged twin-end linisher with two 18" x 14" hard drums
RJH MP twin-end pedestal linisher with two 6" x 8" rubber drums
Sandingmaster CSB2-600 600mm width belt sander, serial no: 7613103
Boere BKS / TKS 1000 1m two-station sanding machine, serial nos: 82032637/82032633 with mobile connecting belt conveyor model TRANSP.2000/1000, se...
Wilson and Pearce twin-end pedestal linisher, serial no: 10696 with two 14" drums
Compair L45SR 58Kw 13-bar air compressor, serial no: LSR-0714 (2004) (in outside shed)
Compair Broomwade refrigerant dryer , 14-bar, type CBD90 AA, serial no: G060/0051 (1989) not in use - for spares only (in outside shed)
Stromab PS50/0 pendulum cross-cut saw, serial no: 210743 (2001) (in outside shed)
Singer 300W201 industrial sewing machine with four thread feed and table
Durkopp industrial sewing machine with table, digital control, and two thread feed
Durkopp Adler N291-185182 industrial sewing machine with 1m table, two thread feed, Efka Variocontrol 810 digital and dust sheet (for spares only...