Jungheinrich model: TFG30 2 1/2 tonne LPG counterbalance fork lift truck with approx 2.4m Duplex mast with side shift and fully enclosed glazed ca...

Supermax model: YC1 1.5 VS turret milling machine with a Newall Digipack 5 DRO powered traverse and table size 9 x 49'' comes with shelf of variou...

Bridgeport JB series turret milling machine fitted with Anilam Wizard DRO powered traverse table size 9 x 42'' comes with setting up blocks and 8'...

Norton surface grinder fitted with 10 x 16'' magnetic chuck

Guifil up stroking press brake model: PE30 60'' bed with manual back stop and quantity of tooling

Edwards Truecut 2.5m x 3.25mm sheet metal guillotine with treadle control and spare blade

Lang 16'' x 5ft gap bed heavy duty lathe with a quantity of tooling, steady tail stock, face plates, chucks, etc. 5 1/2'' bar feed capacity

Mobile ''A'' frame gantry 150kg capacity fitted with a Stahl electric powered travelling hoist with pendant control and a selection of shackles an...

Richmond 3ft radial arm drill, comes with block and tray of drills fitted with jet brake and pendant switch

Femco Engineering 3 phase corner notcher with treadle control

Norton No.6 DB flypres and stand with press tool and 2 balls

Doall vertical band saw 3 phase with spare blade and blade welding attachment Serial No: 353

Yellow mobile gantry 500kg capacity fitted with a Tralift 1 tonne chain hoist and traveller

Qualters and Smith model: QDM32 pillar drilling machine, serial No:190977 fitted with rise and fall table

Colchester Bantam 6'' x 18'' BC lathe - 3 phase with 3 & 4 jaw chucks

Colchester Triumph 2000 8'' x 50'' BC gap bed lathe with 3 and 4 jaw chucks face plates, coolant and Anilam Wizard DRO, serial No: 6/0044/32805

Set of 3ft x 2 1/2'' hand pyramid bending rolls

Addison Tauring section roller with a quantity of formers, model No: Alfa 40H1, machine No: 1783, Year: 1986 - 3 phase

Super Brown 300 DV vertical cut off saw with clamping and stand and spare blades

Edwards 4ft 16 gauge manual metal folder (no counter balance)

Set of manual 54'' x 4'' hand pyramid rolls on mobile stand

Green 3 phase industrial horizontal band saw with spare blade and coolant system

SIP 3 phase spot welder

Bliss 10 tonne mechanical press with guarding and treadle control

Hydrovane Compair rotary receiver mounted air compressor- 3 phase

Hydraulic garage type bearing press 40 tonne capacity

Oxford oil filled arc welding set

Oxy-acetylene welding set on trolley with contents of gas

Kemppi Kempomat 320 mig welder with cables and gas

Oxford oil cooled arc welder and a Murex Tradesmig mig welder (AF)

Miller syncrowave 250 Tig welding set with water cooling gas welding rods, etc.

Naerok model: GP13 1/2'' single phase bench drill with rise and fall table

Warco Minor mill /drill with 11 speeds and traversing table - 3 phase

Vanco Flexiband vertical linsher and a double ended bench grinder

Metal work bench and contents, double door tool cabinet and contents and a Lista roller drawer cabinet and contents

Nederman System welding fume extractor

Heavy duty bolt cutter, sledge hammer, axe, etc.

2 forklift jigs, 2 tonne capacity

8 various reels of mig welding wire

2 heavy duty Record sash cramps, 2 medium duty Record 135 sash cramps and 3 heavy duty G clamps

Quantity of speed clamps, mole grips and miscellaneous tooling

Quantity of welding masks and welding rods and sundries

Quantity of oxy-acetylene hose and guns

Approximately 4ft x 7 1/2ft heavy duty welding bench with Record No. 4 vice and a metal cabinet

4ft x 6ft welding bench with marking out grids and heavy duty frame

16'' swage block, a 11'' machine box and 2 angle plates

Flexovit model: mitrecut 400 abrasive cut off saw - 3 phase, machine No:400/4025, 4kw capacity

Andrews G260 gas/electric space heater

Pescha specialist drill press

Guyson 2 hand shot blast cabinet with dust collector unit, model No. DBH4

Hydrovane 3 phase rotary air compressor

Floor type pipe bender with formers in wooden crate

2 racks and contents of electrical motors and part reels of cable, etc.

Quantity of ducting, Cylone fan, fittings and quantity of carbon steel spring pins, etc, steel dowels the contents of 2 racks

Tray hydraulic floor type pipe bender with formers and rigid power pack

Quantity of trestle and roller feed stands and welding screen

The remaining stocks of assorted metal rod, tube , V section, bar, sheet metal, checker plate, mesh, etc. as found with 4 various racks as labelle...

Lansing narrow pallet truck

Band strapping machine and decoiler and P handle sack barrow

2 receiver mounted air compressors (AF)