16
1x Lightly Used Festo Parallel Grippers HGPL-63-100A Size 63 Short type code- HGPL Mounting
1/2
Passed
Cheltenham, Gloucestershire
Description
1x Lightly Used Festo Parallel Grippers HGPL-63-100A
- Size 63
- Short type code- HGPL
- Mounting internal thread and centering sleeve
- Mounting With through-hole and centering sleeve
- Pneumatic connection G1/8
- Ambient temp 5 - 60 °C
- Any Assembly position
- Corrosion resistance classification CRC 2
- Design structure Guide
- Design structure Piston slide
- Design structure Rack and pinion
- Design structure T-shaped
- Design structure twin piston
- Gripper function Parallel
- Gripping force per gripper jaw at 6 bar, closing 1371 N
- Gripping force per gripper jaw at 6 bar, opening 1233 N
- Lubrication interval for guide components 5 Mio SP
- Mass moment of inertia 1018.17 kgcm2
- Materials information for gripper jaws Hardened
- Materials information for gripper jaws Steel
- Materials information, housing Aluminium
- Materials information, housing Smooth anodised
- Materials note Conforms to RoHS
- Materials note Free of copper and PTFE
- Max. angular gripper jaw backlash ax,ay < 0.2 deg
- Max. force on gripper jaw Fz static 9000 N
- Max. gripper jaw backlash Sz < 0.05 mm
- Max. operating frequency of gripper < 1 Hz
- Max. replacement accuracy < 0.2 mm
- Max. torque at gripper Mx static 300 Nm
- Max. torque at gripper My static 200 Nm
- Max. torque at gripper Mz static 250 Nm
- Min. closing time at 6 bar 600 ms
- Min. opening time at 6 bar 650 ms
- Mode of operation double-acting
- Number of gripper fingers 2
- Operating medium Dried compressed air, lubricated or unlubricated
- Operating Pressure 3 - 8 bar
- Position detection For proximity sensor
- Product weight 13800 g
- Repetition accuracy, gripper < 0.03 mm
- Rotationally symmetrical <= 0.2 mm
- Stroke per gripper jaw 100 mm
- Total force at 6 bar, closing 2742 N
- Total force at 6 bar, opening 2466 N
Auction Details
Shipping
T&Cs & Important Info
Ask seller a question
1x Lightly Used Festo Parallel Grippers HGPL-63-100A
- Size 63
- Short type code- HGPL
- Mounting internal thread and centering sleeve
- Mounting With through-hole and centering sleeve
- Pneumatic connection G1/8
- Ambient temp 5 - 60 °C
- Any Assembly position
- Corrosion resistance classification CRC 2
- Design structure Guide
- Design structure Piston slide
- Design structure Rack and pinion
- Design structure T-shaped
- Design structure twin piston
- Gripper function Parallel
- Gripping force per gripper jaw at 6 bar, closing 1371 N
- Gripping force per gripper jaw at 6 bar, opening 1233 N
- Lubrication interval for guide components 5 Mio SP
- Mass moment of inertia 1018.17 kgcm2
- Materials information for gripper jaws Hardened
- Materials information for gripper jaws Steel
- Materials information, housing Aluminium
- Materials information, housing Smooth anodised
- Materials note Conforms to RoHS
- Materials note Free of copper and PTFE
- Max. angular gripper jaw backlash ax,ay < 0.2 deg
- Max. force on gripper jaw Fz static 9000 N
- Max. gripper jaw backlash Sz < 0.05 mm
- Max. operating frequency of gripper < 1 Hz
- Max. replacement accuracy < 0.2 mm
- Max. torque at gripper Mx static 300 Nm
- Max. torque at gripper My static 200 Nm
- Max. torque at gripper Mz static 250 Nm
- Min. closing time at 6 bar 600 ms
- Min. opening time at 6 bar 650 ms
- Mode of operation double-acting
- Number of gripper fingers 2
- Operating medium Dried compressed air, lubricated or unlubricated
- Operating Pressure 3 - 8 bar
- Position detection For proximity sensor
- Product weight 13800 g
- Repetition accuracy, gripper < 0.03 mm
- Rotationally symmetrical <= 0.2 mm
- Stroke per gripper jaw 100 mm
- Total force at 6 bar, closing 2742 N
- Total force at 6 bar, opening 2466 N
Auction of Industrial Equipment including Specialist Paint Spraying Equipment
Ends from
Venue Address
Unit 21 Park Farm Industrial Estate
Greet
Cheltenham
Gloucestershire
GL54 5BX
United Kingdom
For PD Asset Management Solutions delivery information please telephone 01242 603900.
Important Information
Items are located about 12 miles from our offices in Cheltenham, access for collection
during normal office hours with forklift loading available.
Payment - Due woth 24 hours of the auction ending
Collection with 5 days of auction ending
Terms & Conditions
-
- The auctioneers sell as agents for the seller except where they are stated wholly or partly to own any lot as principal and as such are not responsible for any default by seller or buyer. Subject to clause 18 neither the seller nor the buyer shall have any legal right of action against the auctioneers in respect of any cause or matter arising out of a sale.
- Any reference to the age of an Item is purely for reference and we will not be held in any way responsible for mistakes..
- All lots are sold with all faults and imperfections and errors of description. Illustrations in catalogues or brochures are for identification only. Buyers should satisfy themselves prior to sale as to the condition of each lot and should exercise and rely on their own judgment as to whether the lot accords with its description. Neither the seller, auctioneers, their servants or agents are responsible for errors of description or for the genuineness or authenticity of any lot; no warranty is given by the auctioneers, their servants or agents or by any seller to any buyer in respect of any lot and any express or implied conditions or warranties are excluded.
- The seller warrants to the auctioneers and to the buyer that he is the true owner of the lot or is properly authorised to sell the lot by the true owner and is able to transfer a good and marketable title to the lot free from any third party claims. The seller will indemnify the auctioneers, their servants and agents and the buyer against any loss or damage suffered by them in consequence of any breach of the above warranty on the part of the seller.
- The auctioneers shall have the right, at their discretion, to refuse admission to their premises or attendance at their auctions of any persons.
- The auctioneers have absolute discretion without giving any reason to refuse any bid, to divide any lot, to combine any two or more lots, to withdraw any lot from the auction and in case of dispute to put up any lot for auction again.
- The seller shall be entitled prior to the auction to place a reserve price on any lot. A reserve price once placed by the seller shall not be changed without the consent of the auctioneers. Where a reserve price has been placed, only the auctioneers may bid on behalf of the seller. Where no reserve has been placed, the seller may bid either personally or through the agency of any one person.
- The auctioneers shall have the right to refuse any bid which does not exceed the previous bid.
- The highest bidder shall be the buyer. Any dispute as to any bid shall be settled at the auctioneer's absolute discretion. Every bidder shall be deemed to act as principal unless there is in force a written acknowledgement by the auctioneers that he acts as agent on behalf of a named principal.The ownership of the lot purchased shall not pass to the buyer until he has made payment in full in cleared funds to the auctioneers of the purchase price (and any VAT thereon if applicable).
- The buyer will be responsible for loss or damage to the lots purchased from the time receiving the invoice, and neither the auctioneers nor their servants or agents shall afterwards be responsible for any loss or damage of any kind, whether caused by negligence or otherwise, while any lot is in their custody or under their control.
- The buyer of any motor vehicle is responsible for complying with all legal requirements as to the construction and use of that vehicle and for obtaining all certificates, permits or other authorisations necessary before that vehicle can be used on any road.
- If any lot is not paid for in full and taken away in accordance with the above conditions, or if there is any other breach of these conditions, the auctioneers as the agents of the seller shall at their absolute discretion and without prejudice to any other rights they may have, be entitled to exercise one or more of the following rights or remedies, that is to say:
- to proceed against any buyer for damages for breach of contract;
- to rescind the sale of that or any other lot sold to the defaulting buyer at the same time or any other auction but without prejudice to the auctioneer's right to retain the deposit paid on the lot;
- to resell the lot or cause it to be resold by public auction or private sale. The defaulting buyer shall then pay to the auctioneers any resulting deficiency in the purchase price at the first auction after deduction of any part payment and addition of resale costs. Any surplus shall belong to the seller; You will also pay a fee of 20% to the auctioneer of the hammer price and be charged £20 per day per pallet space storage
- to remove, store (either at the auctioneer's premises or elsewhere) and insure the lot at the expense of the defaulting buyer.
- to charge interest at a rate not exceeding 1.5% per month on the purchase price to the extent that it remains unpaid for more than 2 working days after the day of the auction;
- to retain that or any other lot sold to the same buyer at the same or any other auction and release it only after payment of the purchase price;
- to reject or ignore any bids made by or on behalf of the defaulting buyer at any future auction or to obtain a deposit for accepting any bids in future.
- to apply any proceeds of sale then due or at any time afterwards becoming due to the defaulting buyer towards settlement of the purchase price and to exercise a lien on any property of the defaulting buyer which is in the auctioneers' possession for any purpose.
- In all cases, the lot shall remain at all times at the risk of the seller and neither the auctioneers nor their servants or agents will be responsible for any loss or damage whether caused by negligence or otherwise.
- The buyer shall not be entitled to assign the benefit of any contract entered into by virtue of successful bid at an auction and shall not sub-sell any lot until payment has been made in full.
- The seller authorises the auctioneers to deduct commission (plus any VAT chargeable thereon) from the purchase price.
- The auctioneers shall remit the proceeds of the sale to the seller not later than 7 working days after the auction.
- Where a seller cancels instructions for sale or the auctioneers are unable to sell due to misdescription of the lot by the seller, the auctioneers reserve the right to charge a fee equivalent to the commission percentage charged from time to time of the auctioneers' then latest estimate of the auction price of the property withdrawn, plus VAT.
- In these Terms and Conditions the following words shall have the following meanings: "auctioneer" means Phillip Diver Auctioneers, Unit 21, Park farm Ind est, Greet, Cheltenham, Gloucs, GL54 5BX
- "seller" means the owner of any lot offered to the Auctioneer for sale in the auction.
- "buyer" includes the person to whom the Lot is sold to, the highest bidder at auction, the person declared by the Auctioneer as the buyer and if any of the aforesaid persons are acting for a third party principal,
- These Terms and Conditions supersede all previous terms and conditions.
- The sale of all goods falls outside the sale of goods act. Please see the citizens advice guide buying at auction for clarity on this point.
