Grinder Discharge Hopper, 6.7m x 1.47m x 750mm deep, with Carier 300mm dia. part taper screw hopper discharge conveyor, approx. 7m long

Airmaster MJX70/L/8/11 Dust Filter Unit, serial no. 951716 80

One Set of Six New Hammer Beaters (suitable for lot 182) with frames

12 Boxes x 4mm Unused Balanced Hammer Beaters, and unused hammer beaters as set out on floor (suitable for lot 182)

Unused Beater Shafts (suitable for lot 182), as set out

Unused Wear Plates (suitable for lot 182), as set out

12 Grinder Screens & Frames (suitable for lot 182)

Buhler DFZC-1155 DUAL ROTATION HAMMER MILL, serial no. 10’108’547, with Stromberg 160Kw electric motor, 1455rpm, feeder, permanent magnetic separa...

Airmaster RJX Dust Filter Unit, serial no. 171720, with geared motor driven rotary air seal

Turner 250mm Screw Conveyor, 1.9m long (under lot 190 on intermediate floor)

300mm Hopper Discharge / Screw Conveyor, approx. 5m long

300mm dia. Screw Conveyor, 5m long (T26)

500mm x 500mm Loadcell Weigh Platform, with digital readout

Additives Tip Hopper, with Airmaster RJC 24 2 3-4 Dust Filter Unit, serial no. 9711 813 00 and centrifugal fan (fan on first floor)

Stainless Steel CF44 Chain & Scraper Conveyor, approx. 5m centres long

300mm Belt & Bucket Elevator, approx. 15m centres long (E7) with galvanised steel elevator head

Stainless Steel Fats Day Tank, 850mm x 850mm x 1450m deep, with steam coil heating, insulated clad exterior and two level probes

Christy 2 TONNE cap. THREE TIER HORIZONTAL MIXER, with top hopper approx. 3.2m x 1.3m x 2.1m deep, fitted electro/pneumatic bomb door discharge, m...

300mm dia. Part Taper Screw Hopper Discharge Conveyor, 5.2m long, with two discharge outlets and one electro/ pneumatic slide (D27)

Salmatec SALMACON 2030 TWIN ROTOR MOLASSES MIXER, serial no. 687, with two 15kW electric motor drives, liquids addition equipment and control pane...

Mono CAC22H1/R5/H010V Two Stage Molasses Pump, serial no. C3277 24/01, with electric motor drive

Control panel, with two variable speed inverters

Twin Pot Filter

Mono CAC12H/1R5/H1138 Fats Pump, serial no. C3119/3/01 with electric motor drive

UMT CF44 Chain & Scraper Conveyor, serial no. M00056A 2.5m centres long (MMC) ...[more]

300mm Belt & Bucket Elevator, approx. 15m centres high, with galvanised steel elevator head (E8)

CF44 INCLINED CHAIN & SCRAPER CONVEYOR, 17.6m centres long with six discharge outlets, five electro/pneumatic slides and two two-way electro/pneum...

UMT CF44 CHAIN & SCRAPER CONVEYOR, approx. 16.7m long, with four discharge outlets and four electro/pneumatic slides (C15)

Carier Galvanised Steel-Cased 200mm Chain & Flight Conveyor, 5m centres long (C16)

300mm Chain & Flight Conveyor, 5m centres long(C52)

Turner 8 x 4 TWO DECK SCREEN, serial no. A2005/3781, (screen body replaced 2012)

Riveted Galvanised Steel Water Tank, 2.4m x 1.55m x 1.23 deep

Riveted Galvanised Steel Water Tank, 1.15m dia. x 1.8m deep

Carier 200mm Belt & Bucket Elevator, serial no. 18295, approx. 9.8m centres high (E10)

225mm BELT & BUCKET ELEVATOR, approx. 14m centres high (E11)

Elevator Access Platform, approx. 1.7m x 2.2m x 2.1m high with steel supports, hand rail and access ladder

Carier, 200mm BELT & BUCKET ELEVATOR, serial no. 86265, approx. 15.8m high with electro/pneumatic two-way diverter (E13)

Carier 200mm BELT & BUCKET ELEVATOR, approx. 15m centres high, with spout, permanent magnetic separator (E9)

CF33 Inclined Chain & Screw Conveyor, approx. 5.5m centres long (C66)

Steel Molasses Header Tank, approx. 1.05 dia. x 1.2m deep

Steel Molasses Header Tank, approx. 1.05m dia. x 900m deep with two float level switches

Pre-Press Buffer Bin, 1.5m x 1.5m x 2.5m deep

Fats Coater Buffer Bin, 1m x 1.5m x 2.2m deep

CPM 7932-9 PELLETING PRESS, serial no. 7932-9/4784/239, year of manufacture 1998, 250kW 1500rpm, converted to 11in die track in 2013, with Rotor 2...

CPM 7932-9 PELLETING PRESS, serial no. 7932-9/4370/174, year 1995, 250kW 1500rpm, converted to 11in die track in 2013, with Weg 315kW electric mot...

5mm Unused Pellet Press Die (11in die track) suitable for lots 224 & 225)

One Pair Unused Roller Shell Assemblies (suitable for lots 224 & 225)

One pair Refurbished Roller Shell Assemblies (suitable for lots 224 & 225)

Shear Pins, die clamps and Helix Coils (suitable for 225)

CPM 7122-2 PELLETING PRESS, serial no. 7122/512 3/107, year Rev 2007, input max 160kW 1500rpm, with Hansen 160kW electric motor, 1485rpm, 8mm die ...

440 Inclined Chain & Scraper Feed Conveyor, approx. 2m centres long, with discharge spout and paddle probe

450mm dia. STAINLESS STEEL CASED CONDITIONER 2m long, with 18.5kW electric motor 1465rpm

Steam control Equipment including Masoneilan steam control shut off valve

Pellet Press Spares, asset out on floor (suitable for lot 230)

CPM 7000 7122-2 PELLETING PRESS, serial no. 7122-2/2690/208, 185kW 1500rpm, with ERS 160kW electric motor 1485rpm, 8mm die as fitted, control pane...

250mm dia. STAINLESS STEEL CASED FEEDER SCREW CONVEYOR, 1.7m long

CPM LLX-J STAINLESS STEEL CASED CONDITIONER, serial no. LLX-J/1179/6401, year 2011, approx. 450mm die x 2.6m with 11kW electric motor, feed chute ...

Masoneilan steam control shut off valve

Mono CAB/2H1R3/H1 Molasses Pump, serial no. C274 291/01, with electric motor driver, flow meter and actuator

Press Spares & Equipment as set out (suitable for lots 235 & 230)