Sim Bianca Pneumatic Two Way Diverter Valve (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Rand Screw Conveyor, 200m x 3.9m long, serial no. 1100 (FP77) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Two Pneumatic Slide Valves, 250mm (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Dust Collection Unit, with reverse air fan, 1.5m dia. x 2.3m high on straight, 2m hopper bottom (FP6) (note - this lot is situated at ICKLEFORD MI...

Airco Centrifugal Fan, 280CRD, 280mm inlet, serial no. 3257/1140/00-01, 11kW/2920rpm (DE001) (note - this lot is situated at ICKLEFORD MILL, SG5 3...

Jacob Pneumatic Two Way Diverter Valve, year of manufacture 2014 (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Jacob Pneumatic Two Way Diverter Valve, year of manufacture 2014 (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Simon Single Section Plan Sifter (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Satake Infestation Destroyer, 500mm dia. serial no. REDC410628 (FP31) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Type MPE1000 Infestation Destroyer, 500mm dia. (FP30) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Rotary Seal, 250mm, 1.1kW/1430rpm motor, year of manufacture 2013 (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Floor Tip Hopper, 600mm dia. (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Westinghouse Derion Rotary Blowing Seal, 200mm (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Buhler Process Weigher, serial no. 10171161 (W20), with Sumtronic II control and Buhler rotary seal (AL-22) (note - this lot is situated at ICKLEF...

Buhler Process Weigher, serial no. 10174993 (W21), with MWEE Sumtronic II control and Buhler rotary seal

Mucon ADDITIVES FEEDER, with tip hopper (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

KTron T35 ADDITIVES FEEDER, with tip hopper, serial no. 83099 (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

ITSR Control Panel (FP44) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Buhler MWBL MWEE-V-80/517510 PROCESS WEIGHER, serial no. 10281665, year of manufacture 1997, with MWEE Sumtronic II controls (FP-16) (note - this ...

Buhler MWBL MWEE-V-80/517512 PROCESS WEIGHER, serial no. 10281667, year of manufacture 1997, with MWEE Sumtronic II controls (note - this lot is s...

Two Bolted Sectional Steel Holding Bins, each 1.5m x 2m x 6.1m high approx. on straight, 1.2m hopper bottom on steel supports (note - this lot is ...

Two Bolted Sectional Steel Holding Bins, each 1.5m x 2m x 6.1m high approx. on straight, 1.2m hopper bottom on steel supports (note - this lot is ...

Twin Taper Screw Bin Discharger, 200mm x 2m long (single drive) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Twin Taper Screw Bin Discharger, 200mm x 2m long, (single drive) (FP69) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Twin Taper Screw Bin Discharger, 200mm x 2m long (single drive) (FP70) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Twin Taper Screw Bin Discharger, 200mm x 2m long (single drive) (FP71) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Rand Pneumatic Slide Valve, 350mm (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Three Pneumatic Slide Valves, 500mm (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Screw Conveyor, 300mm x 9m long approx. (FP67) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Rotary Blowing Seal, 300mm (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Steel Surge Hopper (FP76) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Westinghouse Derion GS250 250mm Rotary Blowing Seal, serial no. 13859, 0.75kW/1730rpm, with steel surge hopper (FP75) (note - this lot is situated...

Westinghouse Derion 250mm Rotary Blowing Seal, serial no. 13694, 0.75kW/1410rpm, with steel surge hopper (FP73) (note - this lot is situated at IC...

Westinghouse Derion GS250 250mm Rotary Blowing Seal, serial no. RV112791, 0.75kW/1730rpm, with steel surge hopper (FP72) (note - this lot is situa...

Vibratory Feeder, 250mm, with surge hopper and Vibtec K25 bridge breaker (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Magnetic Separations Rod Type Permanent Magnetic Separator, 150mm (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Lift System Pick Up Hopper (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Westinghouse Derion 200mm Rotary Blowing Seal, with steel tip hopper (FP22) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

CFM 118 Industrial Vacuum Cleaner, serial no. 11AG349, year of manufacture 2006, 1kW, 110v (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

GBS VR120 Two Way Pneumatic Diverter Valve, serial no. T033, year of manufacture 2003 (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Christy Bros Two Section Control Centre (FPMCC7 & FPMCC8) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

One Section Control Centre (FPMCC6) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Six Section Control Centre (FPMCC1 to 5 plus 10) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Two Section Control Centre (FPMCC9) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Quantity Plastic Framed Plan Sifter Sieves (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Quantity Wood Framed Plan Sifter Sieves (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Three Bran Finisher Screen Sections (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Quantity Dust Collector Sock Frames (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Quantity Fabric Filters

Kinetrol 2 Way Pneumatic Diverter Valve (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Quantity Laboratory Screens (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Aerzen GMA 12.6 ROTARY BLOWER, serial no. 71745, year of manufacture 1995, 11kW/1476rpm (FP59) (note - this lot is situated at ICKLEFORD MILL, SG5...

Aerzen GMA 12.5 Rotary Blower, serial no. 378812, year of manufacture 1993, 18.5kW/1470rpm (FP58) (note - this lot is situated at ICKLEFORD MILL, ...

Aerzen GMA 12.4 Rotary Blower, serial no. 304290, year of manufacture 1988, 22kW/2945rpm (blower 6) (note - this lot is situated at ICKLEFORD MILL...

Aerzen GMA 11.4 Rotary Blower, serial no. 307306, year of manufacture 1988, 15/17kW/2930/3520rpm (blower 9) (note - this lot is situated at ICKLEF...

Aerzen GMA 13.6 Rotary Blower, serial no. 385909, year of manufacture 1993, 37kW/2950rpm (ref 18) (note - this lot is situated at ICKLEFORD MILL, ...

Aerzen GMA 10.1 Rotary Blower, serial no. 306095, 9.5kW/2880rpm (blower screen 16) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Aerzen GMA 11.3 Rotary Blower, serial no. 202088, year of manufacture 1978, 7.5kW/2885rpm (blower mixback 17) (note - this lot is situated at ICKL...

Aerzen Rotary Blower, 18.5kW/1470rpm (blower div 10) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Aerzen GMA 12.5 ROTARY BLOWER, serial no. 1550047, year of manufacture 2016, 18.5kW/1464rpm (blower 11) (note - this lot is situated at ICKLEFORD ...