Vee Shaped Bag Aligner, on pedestal, vendors comments/ condition report -Average condition, loaded FOC yes, located Lincoln (V374577-6029)

FTH High Level Palletiser, with roller track and controls, vendors comments/ condition report - Poor condition, loaded FOC yes, located Lincoln (V...

Pacepacker Heat Sealer, on pedestal, vendors comments/ condition report - Good condition, loaded FOC yes, located Lincoln (V374577-6024)

Hulme Martin Impact Heat Sealer, with 350mm working width, vendors comments/ condition report - Poor condition, loaded FOC yes, located Lincoln (V...

Bamford OC3 Farm Type Grain Crusher, with 4kW drive and 170mm wide rolls, vendors comments/ condition report - Poor condition, loaded FOC yes, loc...

Simon 300mm dia. Cast Steel Drop Through Rotary Valve, 410mm high with 260mm x 260mm inlet. The valve has offset bearings, a torque arm speed redu...

Brush Sifter, in bits. Looks like a Solitec. Has 2 No baskets 500mm dia. x 1230mm long. One is 5mm round hole the other 4mm stainless woven wire. ...

Mild Steel Hopper, 1200mm x 1200mm x 1250mm vertical and 1000mm deep hopper. The hopper section has a vertical face and three sloping faces. Flang...

Mild Steel Opens Topped Hopper, on legs, with bracing. Hopper is 2.9m x 1.55m x 550mm vertical. The hopper section is 1.3m deep with a flanged out...

Howe Richardson H17 Semi-Automatic, Mechanical Gross Bag Weigher, with G30 bag clamp. No weights or weight bar, vendors comments/ condition report...

Howe Richardson H17 Semi-Automatic Gross Bag Weigher, built 1964 and calibrated in lbs but with a set of kg weights. Has a G30 bag clamp, vendors ...

T A Shore T160 Mechanical Automatic Net Bag Weigher, serial no. 3038. It has a two speed belt feeder 420mm wide x 600mm roll centres. Weighment si...

Leon Engineering Platform Scale, 1.5M x 1.5M with LD 5204 SS controls. Max load 3 tonne, vendors comments/ condition report - Poor condition, load...

Waukesha Cherry Burrell Gear Pump, with 0.75kW drive 1in ports, vendors comments/ condition report - Average condition, loaded FOC yes, located Li...

FF Ltd Bare Shaft Gear Pump, with 2in ports, vendors comments/ condition report - Average condition, loaded FOC yes, located Lincoln (V374577-6073)

FF Ltd Gear Pump, on base plate with geared drive and 2in ports, vendors comments/ condition report - Average condition, loaded FOC yes, located L...

Mild Steel Hopper, 2.0m wide x 1.7m long with 1.15m of vertical wall and 1.65m deep hopper. It has 4 No support legs and the outlet are 1.0m above...

Insulated Stainless Steel Drying Cabinet, 1.5m x 1.25m x 1.3m high with door, vendors comments/ condition report - Poor condition, loaded FOC yes,...

Insulated Stainless Steel Tank, with conical base 40mm outlet insulated top with 400mm dia. inlet with lid, vendors comments/ condition report - N...

Buhler MNSG 200mm Inclined Tubular Screw Conveyor, year of manufacture 2003, approx. 2.4m long (SCVR421) (note - this lot is situated at ICKLEFORD...

Buhler MNSG 200mm Inclined Tubular Screw Conveyor, year of manufacture 2003, approx. 1.65m long (SCVR419) (note - this lot is situated at ICKLEFOR...

Buhler MNSG 200mm Inclined Tubular Screw Conveyor, approx. 2.2m long, year of manufacture 2003 (SCVR418) (note - this lot is situated at ICKLEFORD...

Magnetic Separations PCD 100 Permanent Magnetic Separator, serial no. 7043, 150mm x 450mm on stainless steel spout section (note - this lot is sit...

Two DCE Dalamatic Bin Venting Units (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, formerly lot...

Aerzen GM4S Blower Unit, 1.5kW electric motor, no. 700398 (WH074) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s t...

Flexicon BFFIC STAINLESS STEEL SACK TIP HOPPER WITH BULK BAG PNEUMATIC HANDLING FRAME, with Flexicon auger, year of manufacture 2005 (note - this ...

Rotary Screen with Westinghouse Derion GS200 Rotary Blowing Seal, serial no 8299 (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load ont...

DCE Donaldson Torit Venting Unit, with Westinghouse rotary seal and dust hopper (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto...

Medway D/C8 Pillar Stitcher, no. 1023, with Medway 150 stitching head and belt conveyor, 450mm x 3.5m approx. (WH-13) (note - this lot is situated...

Auger Screw Conveyor, 200mm dia. x 6.1m long (FP35) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC y...

ONE PAIR FLUTED ROLLS (understood to be refurbished), 1st BKS C-mill, 10.5 flutes per inch, J-type, 1000mm x 250mm (note - this lot is situated at...

ONE PAIR FLUTED ROLLS (understood to be refurbished), 3rd BKC C-mill, 18 flutes per inch, 1000mm x 250mm (note - this lot is situated at ICKLEFORD...

ONE PAIR FLUTED ROLLS (understood to be refurbished), 3rd BKC C-mill, 18 flutes per inch, 1000mm x 250mm (note - this lot is situated at ICKLEFORD...

ONE PAIR SMOOTH ROLLS (understood to be refurbished), C-mill, 1000mm x 250mm (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto pu...

ONE PAIR SMOOTH ROLLS (understood to be refurbished), C-mill, 1000mm x 250mm (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto pu...

ONE PAIR FLUTED ROLLS (understood to be refurbished), 4th BKC C-mill, 26 flutes per inch, J-type, 1000mm x 250mm (note - this lot is situated at I...

ONE PAIR FLUTED ROLLS (understood to be refurbished), B2 C-mill, 36 flutes per inch, J-type, 1000mm x 250mm (note - this lot is situated at ICKLEF...

ONE PAIR FLUTED ROLLS (understood to be refurbished), 4th BKF C-mill, 28 flutes per inch, 1000mm x 250mm (note - this lot is situated at ICKLEFORD...

ONE PAIR FLUTED ROLLS (understood to be refurbished), 4th BKC, 26 flutes per inch, 1000mm x 250mm (note - this lot is situated at ICKLEFORD MILL, ...

Six Tier Roll Rack (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, formerly lot 1053

Six Tier Roll Rack (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, formerly lot 1054

Six Tier Roll Rack (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, formerly lot 1055

Six Tier Roll Rack (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, formerly lot 1056

Cuccolini VAM 1500LX VIBRATORY SCREEN, serial no. 9425 FD0103, CE 03, approx. 1.5m dia. with two screens (note - this lot is situated at ICKLEFORD...

Williams Stainless Steel Cased Proving Cabinet (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, f...

Buhler Stainless Steel Screw (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, formerly lot Load o...

Mill Spares, on pallet (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, formerly lot 1117

Mill Spares, with filter sock frames (frames marked 1119) on pallet (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s...

Rolls, as set out (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, formerly lot 1120

Spares, on pallet (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, formerly lot 1121

Mill Spares, on pallet (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, formerly lot 1122

Assorted Elevator and Conveyor Belting and Buckets, (pallet not included) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purch...

STAINLESS STEEL CASED 300MM WIDE PLASTIC BELT ROTARY CUTTING CONVEYOR, approx. 1.8m long, with control panel and cylindrical cutting attachment (n...

Assorted Equipment, (pallet not included) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, former...

Aerzen GM15L BLOWER, serial no. 705965, year of manufacture 1994, (understood to be reconditioned) (note - this lot is situated at ICKLEFORD MILL,...

Assorted Equipment, on pallet (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchaser’s transport FOC yes, formerly lot 1147

HAWKER TC3IQ24V070B Motive Power Charger, serial no. 357758-A (unused) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchase...

Hawker TC3IQ24V070B Motive Power Charger, serial no. 357758-B (unused) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN) Load onto purchase...

Becker SV5.250/2 Vacuum Pump, serial no. E25Z0614, year of manufacture 2011, understood to be unused (pallet not included) (note - this lot is sit...

Rotolok 20RVSCM01BOP Rotary Air Seal, serial no. 64976, refurbished, 200mm inlet (pallet not included) (note - this lot is situated at ICKLEFORD M...