A sole principal contractor has been appointed to remove & load ALL of the fixed plant and equipment. The purchaser MUST use the sole principal co...

Jiangsu Zhengchang SZLH558 PELLET PRESS, serial no. 216, year of manufacture 2014, with 160kW electric motor, 741rpm, die as fitted, stainless ste...

Teitjen HAMMER MILL, with electric motor, R650 MBV-2 feeder, serial no. 3293, fitted permanent magnetic separator, steel feed hopper, steel base p...

Perry 250A Galvanised Steel Cased Inclined Screw Conveyor, serial no. AV996, year of manufacture 2015, approx. 6m long, 290mm wide on casing, with...

Perry GALVANISED STEEL CASED BELT & BUCKET ELEVATOR, 280mm wide on casing, approx. 6m centres high, with geared electric motor drive and discharge...

Fabricated Steel Grinder Discharge Hopper, approx. 2m x 700mm x 1.1m deep overall, fitted level sensor, (please note this lot is part of combinati...

200mm dia. Inclined Screw Conveyor, approx. 5.8m long, fitted geared electric motor drive, two discharge outlets and discharge chute, (please note...

DCE Dalamatic DU454 F12 DUST FILTER UNIT, serial no. 607878, 11kW, fitted centrifugal fan and with ducting to cyclone receiver, (please note this ...

500mm wide Geared Motor Driven Air Seal, (please note this lot is part of combination lot 50)

Right Hand Side Cyclone Receiver, approx. 750mm dia. x 1.7m deep, with fabricated steel stand, air seal and two discharge ducts, (please note this...

BOLTED STEEL MEZZANINE FLOOR PLANT ENTABLATURE, approx. 6.3m x 6m x 1.8m high, with chequer plate flooring, galvanised tubular steel hand rails as...

Galvanised Steel Cased Feed/ Seal, approx. 200mm x 200mm x 230mm deep on casing, (please note this lot is part of combination lot 50)

Perry GALVANISED STEEL CASED BELT & BUCKET ELEVATOR, 280mm wide on casing, approx. 6m centres high, with geared electric motor drive and chute (to...

Perry 5m dia. BOLTED SECTIONAL GALVANISED STEEL DECAGON STORAGE SILO, 3.75m deep on sides, with discharge screw conveyor, 200mm wide on casing x 1...

Perry GALVANISED STEEL CASED BELT & BUCKET ELEVATOR, 280mm wide on casing, approx. 6m centres high, fitted geared electric motor drive, (please no...

BOLTED SECTIONAL STEEL MEZZANINE FLOOR PLANT ENTABLATURE, approx. 6.3m x 5.7m x 2.4m high to floor level, with chequer plate flooring, kick plate,...

Stainless Steel Vegetable Oil Tank, approx. 500mm dia. x 850mm deep, with ball level float, pump and steel stand, (please note this lot is part of...

One Drum x 50kg Condat Pelgrease 505, (please note this lot is part of combination lot 50)

Pneumatic Greasing Unit, (please note this lot is part of combination lot 50)

Jiangsu Zhengchang SKL2.5 COUNTER FLOW BOX COOLER, serial no. 504, year of manufacture 2014, approx. 1.5m x 1.5m x 1.8m deep on casing, with inlet...

Left Hand Side Cyclone Receiver, approx. 700mm dia. x 2.7m deep, with geared motor driven rotary air seal discharge, spiral wound ducting to coole...

Approx. 250mm dia. Auger Conveyer, approx. 3.7m long, with geared electric motor drive, one discharge outlet, two-way hand diverter and level sens...

Perry GALVANISED STEEL CASED PART INCLINED TWIN CHAIN & SCRAPER CONVEYOR, approx. 350mm wide on casing, approx. 10.2m centres long, with geared el...

Jiangsu Zhengchang SFJZ80x1 800 X 1800mm SCREEN, serial no. 143, year of manufacture 2013, with base frame (painted green), vibratory motor and sp...

Bolted Sectional Steel Mezzanine Floor Plant Entablature, approx. 3.6m x 2.5m x 1060mm high, with chequer plate flooring, kick plates, galvanised ...

Perry GALVANISED STEEL CASED PART INCLINED TWIN CHAIN & SCRAPER CONVEYOR, approx. 250mm wide on casing, approx. 13m centres long, with geared elec...

Perry 150A Galvanised Steel Cased Inclined Auger Conveyor, serial no. AV998, year of manufacture 2015, approx. 3m long, with geared electric motor...

Three Collinson Rotaflex R90 Flexible Auger Conveyors, with feeders/ discharge units and electric motor drives as fitted, (please note this lot is...

Abac PRO B4900 200 FT4UK Horizontal Receiver Mounted Air Compressor, serial no. ITR1046491, year of manufacture 2016, 11 bar max, 3kW, 400V, (plea...

Abac DRY25 Air Dryer, serial no. CAI929257, year of manufacture 2016, (please note this lot is part of combination lot 50)

Compressed Air Piping Throughout Plant, (please note this lot is part of combination lot 50)

Aska AD550 500kVA PACKAGED GENERATOR, serial no. EASOA100944, indicated hours 8716, with Doosan P180LE V10 cylinder diesel engine (cable excluded)...

Atlas 2500 FDA Bunded Fuel Oil Tank, with meter and contents (understood to be half full with red diesel oil), (please note this lot is part of co...

Atlas 2500 FDA Bunded Fuel Oil Tank, with meter, delivery hose and minimal contents, (please note this lot is part of combination lot 50)

PORTABLE JACKLEG OFFICE BUILDING, approx. 16ft long, with residual office furniture contents and unlotted lots, (please note this lot is part of c...

Schaller HUMIMETER BIOMASS MOISTURE ANALYSER, (please note this lot is part of combination lot 50)

Air Flow Mask, (please note this lot is part of combination lot 50)

Electric Cable, from (but not including) switch panel to grinder and pelleting press panels, (please note this lot is part of combination lot 50)

Single Door Power Cabinet, with console (at rear of unit) , (please note this lot is part of combination lot 50)

Newhauser SG5 Galvanised Steel Cased Centrifugal Fan Blower, year of manufacture 2008, with electric motor drive, 310mm dia. intake, (please note ...

Collinson Auger Drive Unit, with galvanised steel hopper, approx. 600mm x 600mm, with Roxell discharge unit, (please note this lot is part of comb...

Perry 250A APPROX. 250MM DIA. GALVANISED STEEL CASED AUGER CONVEYOR, serial no. AV997, year of manufacture 2015, approx. 3.2m long, with geared el...

APPROX. 750MM FLAT BELT CONVEYOR, approx. 4.8m long, with geared electric motor drive, (please note this lot is part of combination lot 50)

Assorted Ducting & Fittings, on one pallet, (please note this lot is part of combination lot 50) ...[more]

Assorted Equipment, on two pallets, (please note this lot is part of combination lot 50)

Two Grinder Screens, Lengths of Ducting & Oil Drums, as set out, (please note this lot is part of combination lot 50) ...[more]

Harrison Portable Industrial Vacuum Cleaner, 240V, (please note this lot is part of combination lot 50)

Assorted Cable, on pallet, (please note this lot is part of combination lot 50)

Assorted Equipment, on pallet, (please note this lot is part of combination lot 50)

Combination Lot, Lots 1 – 49 offered for sale as a one lot contract. Please note – the final highest bid on this lot will only be accepted if the ...

STEEL TIP HOPPER, approx. 3m x 2.2m x 2m deep overall, with approx. 540mm twin chain & scraper discharge conveyor, fitted variable speed drive mot...

Slootweg Sawdust Tip Hopper, approx. 1.8m x 6.7m long x 1m deep overall, with twin chain and scraper discharge conveyor, geared electric motor dri...

Fliegl GIGANT ASW 3101 (three axle 10.1m body) TRIDEM 29T TRI-AXLE GALVANISED STEEL SIDED PUSH OFF SEMI TRAILER, no. 15001238/WFDFLTS29-20 7036/83...