On the Instructions of A Collier Esq and B Woolrych Esq of FRP Advisory, The Joint Liquidators of Systems Power Ltd
Auction closed
Skelmersdale, Lancashire
Timed auction

Auction dates

  • Ended 15 Apr 2021 15:11 BST

Auction details

Currency: GBP
Commissions ex. VAT/sales tax: 15.00% (includes buyer's premium and online commission)
VAT/sales tax on hammer: 20.00%

Venue address

Systems Power Ltd, Unit 1, 3 Prestwood Place, East Pimbo, Skelmersdale, Lancashire, WN8 9QE, United Kingdom

Auction house

Refine your search

Estimate

Filter by Price Range

Primary Category

Category

Brand

Item Type

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 457 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 8

This auctioneer has chosen to not publish their results. Please contact them directly for any enquiries.

Pearson 8ft x 0.125in MS (3mm) ELECTRO-HYDRAULIC GUILLOTINE, serial no.4813/10, with safety fencing to rear Please read the following important n...

Kingsland COMPACT 45 HYDRAULIC METALWORKER, serial no. 400180, with tooling Please read the following important notes:- Collections will not c...

Clarke 300 x 180mm Horizontal Metalworker Bandsaw, with 240V electric motor and steel stand Please read the following important notes:- Collec...

Clarke CMD300 Metalworker Bench Milling Machine, part no. 7610860, 240V, with steel bench and fitted machine vice Please read the following impor...

FK Pollard Corona 21AE Single Spindle Drill, no. 8333, approx. 270mm deep-in-throat, with rise and fall table Please read the following important...

Approx. 280mm dia. Electric Cut-off Saw Please read the following important notes:- Collections will not commence until Friday 16 April 2021 (...

Baileigh CS-315M Electric Cut-off Saw, serial no. C1402044, 315 x 2.0 x 32mm Please read the following important notes:- Collections will not ...

Roller Feed Table, 4m long x 500mm wide on rollers Please read the following important notes:- Collections will not commence until Friday 16 A...

Multi-Outlet Steel Cased Low Voltage Transformer Please read the following important notes:- Collections will not commence until Friday 16 Apr...

Metallisation S350 2227PLC THERMAL METAL SPRAY UNIT, serial no. S350 206, with equipment as fitted (excluding dispensing drums AND contents) Pl...

Tecarc Mig400S Mig Welding Unit, serial no. TA111431190, with F41G wire dispensing unit Please read the following important notes:- Collection...

Tecarc Mig400S Mig Welding Unit, serial no. TA051224651, with F41G wire dispensing unit Please read the following important notes:- Collection...

Danfoss Optyma Plus OP-MPXM162MLP00E Packaged/Outdoor Condensing Unit, Code No. 114X4434, on pallet. Please Note - Lot Located in Normanton, West ...

OKS 750 litre Vertical Welded Galvanised Steel Air Receiver, serial no. FE83083VS, year of manufacture 2011, made in Germany, approx. 800mm dia. x...

Thorworld SMY249040FW 10,000kg SWL MOBILE CONTAINER LOADING RAMP, serial no. T26374YR, year of manufacture 2004, approx. 11m long (reserve removal...

Linde H120 12T cap. DIESEL ENGINE FORK LIFT TRUCK, 5500mm max. fork height, 07743 indicated hours (at time of listing), duplex mast, approx. 4m hi...

Hangcha CPYD35-XW22B LPG ENGINE FORK LIFT TRUCK, serial no. A5AF03067, year of manufacture 2016, made in Chine, 3,500kg cap., max. lifting height ...

Steel Office Cargo Container, approx. 7.2m long, with internal partitioning forming two offices Please read the following important notes:- Co...

Loadsurfer 2500kg cap. Hand Hydraulic Fork Lift Truck, serial no. 2020-03125, year of manufacture 2020, fork width 540mm, fork length 1150mm Plea...

Work-in-Progress, as set out in one area Please read the following important notes:- Collections will not commence until Friday 16 April 2021 ...

T-Bar Sash Cramp & Extensions, as set out Please read the following important notes:- Collections will not commence until Friday 16 April 2021...

230mm Jaw Machine Vice, with rotary base Please read the following important notes:- Collections will not commence until Friday 16 April 2021 ...

150mm Jaw Machine Vice Please read the following important notes:- Collections will not commence until Friday 16 April 2021 (strictly by appoi...

Assorted Drills & Equipment, in four plastic stacking bins Please read the following important notes:- Collections will not commence until Fri...

Steel Welding Bench, approx. 2.5m x 1.25m Please read the following important notes:- Collections will not commence until Friday 16 April 2021...

Multi-Drawer Cabinet, with contents including drills and punch tooling Please read the following important notes:- Collections will not commen...

Work-in-Progress Sheet, under bench Please read the following important notes:- Collections will not commence until Friday 16 April 2021 (stri...

Four Welding Screens, with tarpaulins on floor Please read the following important notes:- Collections will not commence until Friday 16 April...

Steel Framed Welding Jig, approx. 4.4m x 2.4m Please read the following important notes:- Collections will not commence until Friday 16 April ...

Assorted Work-in-Progress & Cabinet Ware, as set out in one area Please read the following important notes:- Collections will not commence unt...

Three x Four Tier Single Sided Cantilever Stock Racks, each approx. 1.2m x 2.4m high (reserve removal until contents cleared) Please read the fol...

Steel Contents of Cantilever Stock Rack, including angle, box and alloy tube Please read the following important notes:- Collections will not ...

Work-in-Progress Enclosure Frame, approx. 3m x 2.1m x 2.2m high Please read the following important notes:- Collections will not commence unti...

Alloy Section, on top of Compressor House roof, including tube and angle Please read the following important notes:- Collections will not comm...

Mobile Trolley, with residual contents Please read the following important notes:- Collections will not commence until Friday 16 April 2021 (s...

Rotabroach ELEMENT 75 MAGNETIC MOUNT DRILL, with plastic carry case Please read the following important notes:- Collections will not commence ...

Approx. 70 Aluminium Strip, as set out, each approx. 103mm x 10mm x 2050mm long Please read the following important notes:- Collections will n...

Work-in-Progress Enclosure Frame, approx. 3m x 2.1m x 2.2m high Please read the following important notes:- Collections will not commence unti...

Mainly Angle Steel Off-cuts, against wall Please read the following important notes:- Collections will not commence until Friday 16 April 2021...

Work-in-Progress Angle & Channel, as set out in one area Please read the following important notes:- Collections will not commence until Frida...

Clarke CBG6RL 150mm dia. Double Ended Bench Grinder, 240V, with steel stand Please read the following important notes:- Collections will not c...

Four Welding Screens, approx. 1.8m wide Please read the following important notes:- Collections will not commence until Friday 16 April 2021 (...

Assorted Steel Work-in-Progress, as set out in two piles Please read the following important notes:- Collections will not commence until Frida...

Quantity of Welding Wire, as set out on two pallets and on shelf Please read the following important notes:- Collections will not commence unt...

Two Steel Cabinets, including welding consumables Please read the following important notes:- Collections will not commence until Friday 16 Ap...

Steel Workbench, approx. 1.05m x 950mm x 1m high Please read the following important notes:- Collections will not commence until Friday 16 Apr...

Work-in-Progress Enclosure Frame, approx. 4.5m x 2.1m x 2.2m high Please read the following important notes:- Collections will not commence un...

Assorted Work-in-Progress, as set out on four pallets Please read the following important notes:- Collections will not commence until Friday 1...

Work-in-Progress Enclosure Frame, approx. 2m x 1.3m x 2m high Please read the following important notes:- Collections will not commence until ...

Four Welding Screens, approx. 1.9m wide Please read the following important notes:- Collections will not commence until Friday 16 April 2021 (...

Contents of Changing Room, including 12 single door personnel lockers (no keys) and three timber benches Please read the following important note...

Two Tool Chests, with contents including fastenings and fittings Please read the following important notes:- Collections will not commence unt...

Busbar Bending Machine, with fitted steel framed bench, approx. 2.5m x 1.4m, and Record No. 2 3½in. engineers bench vice Please read the followin...

Five Steel Trestles Please read the following important notes:- Collections will not commence until Friday 16 April 2021 (strictly by appointm...

Assorted Lengths of Tinned Copper, as set out on trestles Please read the following important notes:- Collections will not commence until Frid...

Contents of Timber Crate, including aluminium and tinned copper off-cuts Please read the following important notes:- Collections will not comm...

Assorted Lengths of Tinned Copper, Busbar & Aluminium, as set out on cantilever framed rack (please note - photographs have been changed subject t...

Four Tier Cantilever Framed Rack (contents excluded – reserve removal until contents cleared) Please read the following important notes:- Coll...

Two Steel Roller Stands, approx. 300mm wide on rolls Please read the following important notes:- Collections will not commence until Friday 16...

Steel Framed Workbench, approx. 2.6m x 1.15m Please read the following important notes:- Collections will not commence until Friday 16 April 2...

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240
Page of 8

Recently Viewed Lots