Debarker - Valon Kone model VK-16 Robust debarker built in 1971. Complete with log loading conveyor, bark removal conveyor, kicker and cradle for ...

Baler - Mesken-Haule Jumbo baler built 2008 and commissioned 2009. Can bale shavings or chopped straw. This is a three ram machine with an integra...

Feeder - Herbert Evenflow belt feeder 1800mm wide x 1600mm deep x 220mm high. It has a control panel with variable speed drive for the feeder belt...

Dust Filter - Airmaster 25M shaker type dust filter with 1.5kw fan. No underhopper. Has 12 No bags and a filter area of 25m2. (UCPE 6358) Price - ...

Packaging - Premier Tech 4 station vertical baler model EM600R believed to be 1996 vintage. No A-96-SER.005. It worked on either dried grass or ch...

Drum Dryer - Single pass rotary drum drying plant with an evaporative capacity of 270 - 300 kg/hr. This is a Chinese built plant which is less tha...

Press Feeder - Stainless steel twin chain pellet press feed conveyor. 1.6 metre shaft centres and 300mm working width. (UCPE 6365) Price - £1,000P...

Pellet Press - Salmatec Maxima 700-100 3K pellet presses built in 2018 and have never been used. Each press has 2 x 132kw drives, stainless steel ...

Pellet Cooler - Geelen pellet cooler model VK 24 x 24 RP built in 2018 but has never been used. This machine is not fully assembled, the stainless...

Sieve - Cryloc rotary pellet sieve model 46-31 built in 2018 but has never been used. This is a single deck sieve and has a 2.2kw drive. Screen pe...

Sieve - Siebmachinen & Fordertechnik oscillating screen model ASM 300 built in 2018 but has never been used. This is two deck machine with a singl...

Dryer - Allgaier rolling bed dryer model WB-T-2.5-12.0 built in 2018 but has never been used. This dryer has the under hopper, supporting steel wo...

Pellet Press - Van Aarsen C750 pellet press with 160kw motor. Built in 1992 and just been fully refurbished, not used since. Set up for die track ...

Furnace - Polytechnik step grate furnace with up to 4MW thermal output. Built 2018 and still in the factory where it was built, never been used. T...

Packaging - Ausloos complete bagging plant built in 2006 comprising an MTB vertical form fill and seal unit to do around 450 bags per hour dependi...

Screw Conveyor - Round cased screw conveyor with 340mm flight diameter, inspection plates and geared drive unit. The working length is 3.86 metres...

Screw Discharger - Triple screw discharger 1.0 metre wide x 1.3 metres long with a side mounted 2.2kw geared drive unit. It has 3 x 300mm diameter...

Mixing Screw - Round cased mixing screw with 300mm diameter paddles, hinged access doors and geared drive unit. The working length is 3.12 metres,...

Shredder - EuRec static twin shaft shredder model Z85EIS/33 built 1998. It is diesel powered and has 2 x 160kw hydraulic drives for the shredding ...

Hammer Mill - CBI Grizzly mill model 4860 with vee belt drive and 630kw drive motor. The mill was built in 2005 and has Serial No 05 - 100. It has...

Straw Bedding Plant - Straw bedding plant believed to be around 2015 vintage. Includes a big bale conveyor with shredder (believed to be by Ken Mi...

Extruding Plant - Pet Food/Fish Food extruding line comprising Clextral BC82 twin screw extruder with Wenger 7DCC conditioner, steam set, water pu...

Drum Dryer - Swiss Combi rotary drum dryer in stainless steel believed to have been built in 2000. Decommissioned in 2005 after only about 3 years...

Hydraulic Powerpack - Vickers hydraulic powerpack on support frame with control panel and oil cooler. Pump type G5 16 A13R 23R ref PU8110. (UCPE 6...

Hydraulic Powerpck - Vickers hydraulic pump model 25V21A. Drive could be 15kw. (UCPE 6410) Price - £200.Please read the following important notes:...

Tank - Circular plastic tank 1100mm diameter x 1700mm high with top cover and internal agitator with motor. About 1500 litres capacity. (UCPE 6411...

Tank - Circular plastic tank 1000mm diameter x 1380mm high with top cover and outlet valve. About 1000 litres capacity. (UCPE 6412) Price - £50.P...

Fan - Welvent centrifugal fan with backward lamina blades and air inlets on both sides. Belt driven but no motor. Impellor is 1000mm diameter and ...

Fan - 1000mm diameter axial fan with 18.5kw 1460rpm drive. (2 remaining) (UCPE 6414) Price - £400 each.Please read the following important notes:-...

Dust Filter - Reversejet filter on under hopper, no fan, no ID plate. 1700mm long x 1075mm wide x 4730mm high including under hopper which is 223...

Tote Bins - Steel framed tote bins with plastic inner case 1.2 M X 1.2 M square. Thought to be PD Rotomouldings Durabins model DB45 with a nominal...

Dust Filter - Cimbria Cyclofan model CF20 no fan. Serial number 14811. Body 1000mm diameter. (UCPE 6417) Price - £500.Please read the following im...

Compressor - Broomwade Compair model Cyclon 22 compressor in acoustic enclosure. Serial number F165/1678 built 1998. It has a 26.1kw drive and wil...

Rotary Valve - Cast steel rotary valve with geared drive. 600mm rotor diameter x 500mm wide. Inlet 700mm dia, 970mm deep, rectangular outlet. (UCP...

Rotary Valve - Rotolok drop through rotary valve with drive. 620mm deep body and 350mm diameter inlet and outlet. (UCPE 6421) Price - £750.Please ...

Fan - Provenair centrifugal belt driven fan model 30B Size C75 with 30kw motor. (UCPE 6422) Price - £750.Please read the following important notes...

Screw Conveyor - Screw conveyor with feed hopper on top but no drive. 500mm diameter x 2.0 metres long with 1.68 metre long x 460mm deep feed hopp...

Screw Conveyor - Stainless steel round cased screw conveyor with steam/hot water jacket over 3.0 metres of length. Conveyor flight is 200mm diamet...

Rotary Valve - Rotolok drop through rotary valve with drive and rectangular inlet and outlet. Model 30RV SCMC 28000E No 43273. 470mm deep body and...

Fanuc S-420i robot palletiser built 1996. Type A05B-1313-B501. Has control panel but no pick up head. (UCPE 6246) Price - £5,000. Please read the...

Brush Sifter - Le Coq 530 brush sifter with 7.5kw motor and 4mm screen. This has been fully refurbished. New belts, pulleys, bearings and brushes....

Shredder - Morbark Mulch Hog HD30, YOM, Ser No and running hours not known. It has a 770mm wide tray feeder feeding the 150kw mill and a 900mm wid...

Eddy Current Separator - Bunting eddy current separator with drum magnet on inlet. Model ECS50-VF-CP-PDRE1204-29180. Built 11/2020. Ser No 234831-...

Briquetting Press - Weima briquetting press model TH1800, Ser No 990-275 built 2019. It has twin outlets with exit trays, a 37kw hydraulic power p...

Briquetting Press - Weima briquetting press model TH1800 M, Ser No 990-272 built 2018. It has twin outlets with exit trays, a 37kw hydraulic power...

Shredder - Weima single shaft shredder model WL15 built 1998, Ser No 500-3660. It has a 45kw drive motor and hydraulic power pack. (UCPE 6434) Pri...

Bunker - Dragon Machiney storage bin Ser No 45823 built 2013. Overall dimensions 8.5 metres long x 2.4 metres wide x 3.7 metres high. The hopper ...

Dryer - Alvan Blanch CD drier model PCD 13300 Ser No 20/49936. Believed built 2020. Overall dimensions 17.5 metres long x 3.7 metres wide x 4.0 me...

Cooler - Dari Kool stainless steel milk cooling tank with agitator. Overall dimensions 2.4 metres long + 750mm for cooling pump x 1.4 metres wide ...

Tank - Stainless steel tank by Surmet on mild steel support frame with mild steel bands. Tank is nominal 2.0 metres diameter x 5.0 long. Working v...

Pump - Pump (UCPE 6439) Price - £300.Please read the following important notes:-***Overseas buyers - All lots are sold Ex Works (EXW)*** Equipmen...

Pump - Pump (UCPE 6440) Price - £300.Please read the following important notes:-***Overseas buyers - All lots are sold Ex Works (EXW)*** Equipmen...

Tank - Stainless steel open topped tank with mild steel base support. The tank is 1.5 metres diameter a 1.6 metres high including base. Tank depth...

Tank - Stainless steel tank with conical base and 200mm outlet. Tank is 1.2 metres diameter x 1.07 metres on vertical and 600mm deep cone. The top...

Tanks - Mild steel tank bunds. 4.0 metres long x 2.0 metres wide x 920mm deep. Both have had small sections cut out of the body which will need pa...

Evaporator - Evapco cooling tower 2.2 metres x 1.44 metres x 3.25 metres high. Top extraction fan 2.0 metres diameter with external 15kw drive tha...

Chiller - ICS Group chiller approx 3.0 metres long x 1.5 metres wide x 2.5 metres high. (UCPE 6445) Price - £1,000.Please read the following impor...

Tank - Horizontal mild steel tank in transport frame. The tank is lagged and clad but not good external condition. Frame size 6.0 metres long x 2....

Pump - Diaphragm pump. (UCPE 6447) Price - £250.Please read the following important notes:-***Overseas buyers - All lots are sold Ex Works (EXW)**...

Silo - Mild steel silo with flat base and sweep arm discharge for wood chip or non free flowing material. The silo is in three sections one of whi...