Wadkin BZB 30 DC Braked Wadkin BZB 30 Bandsaw Maximum width of blade 1.5 inch (38mm) Maximum depth of cut 14″ (355mm) Distance from saw to body...

Wadkin RM 16 Wadkin RM 16 planer thicknesser (406 mm) Thicknessing width capacity 16″ Surfacing width capacity 18″ (457 mm) Overall length of...

Wadkin JV Double Disc Sander 30 inch (762mm) discs 5HP 3 phase motor 950 RPM 950 KG---- Condition:Used Location:ng17 Shipment: ____  REF 1204 ...

Wadkin PK Sliding Table Saw Wadkin PK with the extended sliding table and the sought after double mitre fence very rare to find.Maximum size of bl...

Robinson SCE Tenoner DC Braked Robinson SCE Tenoner in great condition Four head with two Modern cutter blocks installed---- Condition:Used Locat...

Wadkin BSW 20″ DC Braked Wadkin 20″ BSW DC BRAKED Max dia of blade 20″ (500mm) Max cut 7″ (175mm) Table Size 52″ x 36″ (1320 x 990 mm) Fence t...

Zimmermann Bobbin Sander 3 phase Table length: 500 mm Table width: 500 mm Table height over floor: 1.050 Diameter of Bobbin: 50mm only one includ...

Wadkin Double Disc Sander 30 inch (762mm) discs 5HP 3 phase motor 950 RPM 950 KG---- Condition:Used Location:ng17 Shipment: ____  REF 1204 ......

Wadkin MZF Bandsaw More details to be added---- Condition:Used Location:ng17 Shipment: ____  REF 1204 ...[more]

Wadkin BRA Crosscut Details to be added---- Condition:Used Location:ng17 Shipment: ____  REF 1204 ...[more]

Wadkin DM Morticer 3 phase Maximum Chisel Capacity 25mm Timber Capacity With 100mm Chisel 254 x 203mm Timber Capacity With 165mm Chisel 190 x 203...

Zimmermann Profile Sander rebuilt 4 years ago Zimmermann Profile Sander which we rebuilt 4 years ago by ourselves and since used in our pattern sh...

Unknown Saw Unknown manufacture Saw max blade size 16 inch no riving knife so sold as spares or repairs 12 inch blade fitted SOLD AS SEEN---- Co...

Sedgwick LK Ripsaw Motor Continuous Rating: 4kW (5.5hp) Maximum Saw Diamiter: 400mm (16in) Maximum Saw Projection: (140mm 5 3/4in) Spindle Diam...

Phillipson 24 inch disc sander single sided Disc diameter 610 mm Speed of disc 1000 rpm Table dimensions 840 x 300 mm Table tilt +/- 45º Zero Lock...

Phillipson 24inch double disc sander Disc diameter 610 mm Speed of disc 1000 rpm Accuracy (run out tolerance) 0.08 mm Table dimensions 840 x 300 m...

Wadkin BJS Jigsaw / Fret Saw     Very rare machine     ----   Condition:Used   Location:ng17   Shipment:   ____       REF 1204 ...[more]

Phillipson 30 inch double disc sander  details to be added---- Condition:Used Location:ng17 Shipment: ____  REF 1204 ...[more]

Zimmermann FZ0 Router on a Phillipson base Motor 0,25 kW 22000 rpm Collet tool holder with cap nut Ø 8 mm Head tilts 45 degrees both ways---- C...

Phillipson Oscillating Bobbin Sander     Phillipson Bobbin Sander in great condition, purchased from the Jaguar development plant which can been s...

Danckaert Dovetailer Danckaert dovetailer 3 phase single pin 16″ capacity The front handle as been repaired in the past---- Condition:Used Loc...

Zimmermann Profile Sander Zimmermann Belt sander with a built in extraction system Forward and reverse switch, with two speeds either way Table ...

Zimmermann Profiler immermann Belt sander with a built in extraction system 3 PHASE Forward and reverse switch Three profile bards included flat...

Phillipson Profiler     Supplied with 4 contour bars (15, 30, 40, 50 mm) flat one side curved the other Spring loaded belt tensioner Extreme accur...

Wadkin DMV Morticer Wadkin DM/V vibrating head morticer with chisels, augers and collets not shown on picture full set included Wadkin DMV Vi...

Wadkin WX Pattern Miller     In great condition with an extensive tooling cabinet, WX – The overhanging arm is raised and lowered either by power ...

Phillipson Disc Sander single sided Phillipson 24 disc sander Three in stock table tilts 45° up and down---- Condition:Used Location:ng17 Shipmen...

Wadkin LQ With Tooling     Wadkin LQ With Tooling, rare to find a machine with tooling nowadays Centre of cutter spindle to inside of body frame 2...

Wadkin SET Tenoner Maximum timber thickness 150mm Maximum timber width 350mm Maximum tenon length 150mm Maximum tenon thickness 32mm Depth of bott...

Wadkin PP     Wadkin PP Sliding Table Saw 18 inch blade 5.5 inch max cutting depth (140 mm) 3.7/8 inch max cutting depth with blade at 45° (100 mm...

Bursgreen 6 Inch Wide Surfacer Rare 6 inch wide surfacer Skewed cutter block for a better finish.---- Condition:Used Location:ng17 Shipment: ____...

Wadkin MF Morticer Will take timber up to 12″ deep X 9″ wide Maximum size of mortise using chain 1 1/4″ x 3″ X 6″ deep Maximum size of chisel 1″ W...

Wadkin 20″ BSW Ripsaw Wadkin 20″ BSW Max dia of blade 20″ (500mm) Max cut 7″ (175mm) Table Size 52″ x 36″ (1320 x 990 mm) Fence tilts to 45° ...

Wadkin LM Drill DC Braked Wadkin LM Drill in great condition dc braked with telescopic probe switch, original fence also included with the machine...

Wadkin SQ 20 inch Ripsaw Wadkin SQ 20″ Ripsaw 7″ Deep Cut Maximum distance between fence and blade 22″ 5HP Motor---- Condition:Used Location:ng17...

Zimmermann SZ1 600mm disc sander Disc sander by Zimmermann with 600mm disc 1.7kW motor direction of rotation optionally left - right switchable,...

Wadkin BSW 26" Sawbench     BSW650 (26") - with roller outfeed table Rise and fall saw, table 1090 x 860 mm (43" x 34"). 7.5 kW (10 HP) (3 phase)....