Two Lifting Frames (As Lotted) (Note: Requires LOLER Examinations prior to use)

A 890mm x 520mm Battery 4-Point Lifting Frame, SWL1250Kg (Note: Requires LOLER Examination prior to use)

An MHS Model FMH20 Slip On Fork Lifting Frame, Serial No. 24183, 1500Kg capacity at 850mm (Note: Requires LOLER Examination prior to use)

A Pair of 3000Kg, 1.5M Test Slings and A Pair of HOLLAND GP6BG 35mm Shackles (Note: Requires LOLER Examinations prior to use)

Seven Various Lifting Slings, Five Pairs of Shackles and Six Pairs of Lifting Eyes (Note: Requires LOLER Examinations prior to use)

Two ESP Oil Spill Kits in Grab Bags

A Pair of COSCO Aluminium Folding Access Steps and An Aluminium Folding Work Platform

Two Workshop Paper Roll Dispensers and A Quantity of Part Rolls and A Bag of Industrial Rags

A 455mm x 455mm x 900mm COSHH/Flammable Single Door Storage Cupboard

A DEB Skin Safety Centre Wall mounted Panel with Dispensers and A Box of Unused DEB Protect Plus

A TOYOTA Traigo 48 15 Model 8FBET15 Spec. FSW-EO11, Battery Electric Forklift Truck, 1500Kg capacity at 500mm Centres, Triplex Mast, Max. Lift 43...

A CAT Model EP25KPA Battery Electric Forklift Truck, 2500Kg capacity at 500mm Centres, Triplex Mast, Max. Lift 4800mm, Mast Closed Height 2000mm, ...

A GRAF 30-Litre Ionised Water Butt with Tap and Two Part Used 25-Litre Drums of Deionised Water

A BOSS Model SH40 LPG Forklift Truck Type SH40-5A2, PERKINS Engine, Max. capacity 4000Kg at 500mm Centres to 4000mm or 3400Kg at 500mm Centres to ...

A MAINI Model EHS500 Battery Electric Stacker, 500Kg capacity to 500mm Lift Height, Serial No. 96/02/85, complete with Charger (Note: Requires LOL...

A DEMAG Model DKUN10-1000K 2000Kg capacity Hoist complete with Pendant Control (For Spares or Repair, Gearbox Fault)

A RONCARI Manual Hydraulic Pallet Truck

A RONCARI Manual Hydraulic Pallet Truck

A CROWN Manual Hydraulic Pallet Truck

A CASCADE Model 35D-FP-503A Fork Clamp/Positioner Forklift Attachment, 1400Kg capacity at 500mm Centres, Class 2A Mounts, Serial No. 5440191 (Note...

A CASCADE Model 35D-BCS-A51X Adapted Bakers/Bale Clamp Forklift Attachment (Note: Requires LOLER Inspection prior to use)

A CASCADE Model 28G-FPS-A533 Fork Positioner Forklift Attachment, 1900Kg capacity at 500mm Centres, Fork Length 100mm x 40mm x 1200mm, Fork Spread...

A Model CV2000 Bolt On Fork Positioner Forklift Attachment, 2000Kg capacity at 500mm Centres, Fork Length 100mm x 40mm x 1100mm, Fork Spread 340mm...

A Model CV2000 Bolt On Fork Positioner Forklift Attachment, 1600Kg capacity at 500mm Centres, Fork Length 100mm x 40mm x 1600mm, Fork Spread 340mm...

A CASCADE Model 20G-FPS-A11X Fork Positioner Forklift Truck Attachment, 1400Kg capacity at 500mm Centres, Fork Length 100mm x 35mm x 1000mm, Fork ...

A CASCADE Bale Clamp, 2200Kg capacity at 500mm Centres, Class 2/3 Mounts

A HOMELITE Model HGN2400D, 2400 Watt Portable Petrol Generator, 196cc 4-Stroke Engine with 240V, 110V AC Outlets and 12V DC Outlet

A HOMELITE Model HGN2400D, 2400 Watt Portable Petrol Generator, 196cc 4-Stroke Engine with 240V, 110V AC Outlets and 12V DC Outlet

A DRAPER Model GHD200 200mm Double Ended Grinder on Steel Plinth complete with Wheel Dresser and Spare Cutters

A SEALEY Model BG15GXW/00 6 Inch Bench Grinder/Wire Brush on Steel Plinth

A YUKON Model CY16 GB16 SS and SC Gap Bed Lathe, 10 Inch Swing x 30- Inch between Centres, 3-Jaw Chuck with ANILAM Wizard 2-Axis DRO complete with...

A Large Quantity of Assorted Tool Steel, Cutters and Tool Mounts in Three Plastic Tote Bins

Two ECLIPSE and One MITUTOYO Magnetic Clock Stands and a Number of Dial Indicators by MITUTOYO, BATY, MERCER, etc. (As Lotted)

A 300mm x 255mm x 230mm T-Slotted Box Table and a 160mm x 130mm x 200mm Angle Plate

Three Various Angle Plates and Three V Blocks (As Lotted)

A Quantity of Centres in A Plastic Tote Bin

Ten Various Chucks and A Quantity of Chuck Keys in A Plastic Tote Bin

A Steel Marking Out Bench with Imperial Markings with Two Double Door Cupboards Below enclosing Shelving, Plate Top 5ft x 2ft, Overall 625mm x 194...

A QUALTERS AND SMITH Drillmaster Model Herald, 1000mm Radial Arm Drill, Serial No. 83 8022, Rising Column to 1750mm fitted Work Light complete wit...

An ABWOOD Swivel Machine Vice, 155mm Jaws

A Large Quantity of 10mm and Sub 10mm Drill Bits, including Morse Taper Holders and Shanks in A Steel Tote Bin

Over One Hundred Various 10mm to 20mm Drill Bits in A Steel Tote Bin

Over Fifty Various 20mm x to 34mm Drill Bits in A Steel Tote Bin

Seventeen Various 35mm Plus Drill Bits in A Steel Tote Bin

Over One Hundred and Fifty Various 5mm to 42mm Reamers in A Steel Tote Bin

A RECORD No. 14P 6 Inch Bench Vice

A PIMX-125 Tilting Machine Vice, 125mm Jaws and another Machine Vice, 100mm Jaws

A ZYLISS Aluminium Clamp On Vice with 105mm Jaws and Clamp On Workpiece Holder

Ten Various Recoil Thread Repair Kits and Associated Tools, etc. in A Plastic Tote Bin

A 1090mm x 750mm x 1160mm Workshop Chest of Eleven Graduated Drawers and Contents of A Large Quantity of Taps and Dies, in Three Drawers, BSP, BSW...

A Quantity of Taps comprising Six M8 x 1.25, Three M10 x 1.50, Three M12 x 1.75, Four M20 x 2.50, One M27 x 3.0 and 2-Piece Handle

A GIMA Modem IGM30-8 16-Speed Bench mounted Pillar Drill with 265mm x 320mm T-Slotted Table with 13mm Chuck, Serial No. I1586

A AJAX Model AJT5 Turret Mill, 1400mm x 280mm T-Slotted Table fitted MITUTOYO Linear Scale 3-Axis DRO and Guards, Serial No. 34171B50009

Eleven Various CLARKSON, OSBORN UK, etc. Milling Tool Holders, in Plastic Tote Bin (As Lotted)

A BISLEY 6ft Grey Steel Double Door Cupboard with Part Bin fitted Interior and Contents of Milling Cutters, Boring and Tapping Heads, Collets, Wed...

A JONES AND SHIPMAN Model Ensign, Type 4012012, 12 Inch Rotary Table

A Machine Vice with 160mm Jaws

A Swivelling Machine Vice with 235mm Jaws and Handle

Fourteen Various ROTO Bore Cutting Tools and Morse Taper Tool Holder, 22mm to 60mm (As Lotted)

A Quantity of Various Hole Saws by STARRETT, BLACK AND DECKER, etc., Arbors, etc. (As Lotted)