A Quantity of Alpha Numeric Punches (As Lotted)

Four Various Boxes of Drill Bits (As Lotted)

Three SDS Masonry Drills, 20mm x 450mm, 25mm x 450mm, 20mm x 210mm and Six Other Various Long Drills, Flap Wheels, etc. (As Lotted)

A 37mm Adjustable Hand Reamer, An H13 Adjustable Hand Reamer, A 20mm Hand Reamer, Two Cylinder Hones and Three Various Die Grinder Bits

A Quantity of T-Slotted Table Clamping Equipment in Three Stands and Case (Note: All Sets Incomplete) (As Lotted)

A MEDDINGS 1380mm x 545mm x 925mm Cast Iron T-Slotted Drill Bench and A 920mm x 640mm x 840mm Steel Work Table

An AMERICAN PRO 670mm x 455mm x 1150mm Tool Cabinet on Wheeled Base with 12-Drawer Top Chest and Hinged Lid Compartment

A CHLORIDE SPEGEL 36-Cell SS MPS 3-Phase Battery Charger

A CHLORIDE Model 21 Super, Type 21S 48V, 40 Amps, 2 Volts per Cell, Single Phase Battery Charger

A CHLORIDE Model 21 Super Type 21S 24Volt, 30 Amps at 2 Volts per Cell, Single Phase Battery Charger

A HALFORDS Smart Battery Charger a DRAPER 6v/12v Battery Charger and a TAURUS 4 Battery Charger

A HAWKER Life Tech Type 3LTM2, 48V-7KW 3-Phase Battery Charger

Two EXIDE Type 2100SP, 24V, 30 Amp Single Phase Battery Chargers and A Quantity of Charger Leads

A Quantity of Ratchet Straps (As Lotted)

A Pair of DUFF BARRETT Type 516MT, 5-Ton capacity Ratcheting Toe Jacks

A LAKE AND ELLIOT Type M6DL 6-Ton Bottle Jack

A Pair of MHS 1200mm x 200mm Slip Arm Side Arms for Drilled Forks with Rubber Facings

A 10-Ton Manual Hydraulic Mandrel Press, 570mm Throat with BLACKHAWK P76 Hydraulic Ram, Overall 1300mm x 520mm x 1470mm (Method Statement Required...

A DEMAC Retractable Air Line Reel with Swivel Bracket (Note: Disconnect where Marked) (Method Statement is Required for Removal - Working at Heigh...

A DEMAC Retractable Air Line Reel with Swivel Bracket (Note: Disconnect where Marked) (Method Statement is Required for Removal - Working at Heigh...

A DEMAC Retractable Air Line Reel with Swivel Bracket (Note: Disconnect where Marked) (Method Statement is Required for Removal - Working at Heigh...

A DEMAC Retractable 240V Extension Lead Reel with Inspection Lamp and Swivel Bracket, (Method Statement Required -Working At height and Electrica...

A DEMAC Retractable 240V Extension Lead Reel with Inspection Lamp and Swivel Bracket,

A DEMAC Retractable 240V Extension Lead with Twin Socket Outlet and Swivel Bracket (Method Statement Required for Removal - Working at Height and ...

A 25-Litre Grease Dispensing Gun, Four Various Grease Guns and Three Oil Cans

A Set of Three Gorilla Bars, 14 Inch, 24 Inch and 36 Inch

A Set of Three Gorilla Bars, 14 Inch, 24 Inch and 36 Inch

A RECORD No. 22 QR Bench Vice, 95mm Jaws

A RECORD 3-Ton Swivel Bed Vice, 100mm Jaws, mounted on 90 Degree Drop-Down Frame for Van Installation

A TENG TOOLS 660mm x 300mm x 250mm 3-Drawer Tool Chest containing A Quantity of Hand Tools including Pliers, Half Inch Drive Socket Set and Breake...

A SUPERLINE Pro 660mm x 300mm x 415mm Black Steel 5-Drawer Tool Chest with Lifting Lid

A 560mm x 340mm x 700mm Red Steel 6-Drawer Chest with Retaining Bar

A Quantity of Electrical Connectors, Fittings, Heat Shrink, Closure Tools, Soldering Iron, etc., in Three Micro Drawer Cabinets, etc. (As Lotted)

A Quantity of Various Electrical IP44 Connectors, MCBs Consumer Units, etc., and A Quantity of Cable on A Pallet (As Lotted)

A 640mm x 165mm x 425mm Red Steel 36-Drawer Cabinet with Retaining Slide and Three Various Tool Boxes

A 55mm capacity 240V Bandsaw

A Pair of DPR, 5-Ton SWL, Low Access Forklift Truck Jacks and A Pair of Mast Stops

Three Pairs of Axle Stands and A Single Workpiece Prop

Five Various Bottle Jacks (As Found)

An ENERPAC 10-Ton Manual Hydraulic Power Ram with Analogue Dial and Type RC102 10-Ton Short Stroke Ram together with another Short Stroke Ram

Thirty Three LINDE T20/T24 Load Wheel Assemblies in a Pallet Box

A Quantity of Assorted Forklift Attachment Rail including Class 3 Castellated and Bottom, 1200mm each, A Set of Rails for A CASCADE 30G Rotator, C...

Four CASCADE J Rail Side Shift Mounts with Double Acting Cylinders, Two CASCADE P/N 7G6246 and Two CASCADE P/N J96242

Five Sheets of Approx. 1500mm x 600mm Expanded Metal and A Quantity of Smaller Sheets

A Pair of CASCADE 80mm x 45mm x 1100mm Double Pallet Handler Forks, P/N 6243424, capacity 625Kg at 600mm Centres with HARDOX Wear Tiles

A DYNAFOR Model EOT187 Max. 5T Cap. Crane Scale, Calibrated until 05/11/20 with certificate in Blow Moulded Case

A Pair of CASCADE Turn A Fork Mounts for a 30G Series, A Pair of Slide Arms for a CASCADE 50D Series Clamp, A Pair of CASCADE 28G-CFR-375 Cylinder...

A Pair of Long Arms and A Pair of Short Arms for CASCADE Paper Roll Clamps with Five Various Grip Pads (As Lotted)

A CASCADE Model DRL465B Rotator Stripped and Partially Re-Assembled, capacity 6500Kgs at 600mm Centres with Class 4 Mounts (As Lotted)

A Partially Rebuilt CASCADE Fork Clamp - New Bearings fitted with A Pair of Fork Blanks 125mm x 40mm x 1200mm (Incomplete)

An Unused Ring Gear for A CASCADE 77F Rotator P/N 775963 and a box of Ball Bearings together with an Unused CASCADE 77F Revolving Connection P/N 6...

A 1220mm x 600mm 4-Wheeled Bogie, A Wheeled Platform 570mm x 545mm, A Pair of Wheels for A Welding Set and A Bread Basket Bogie

10 x Various Forklift Attachment Hydraulic Rams

A Pair of Slip On Barrel Clamps for Drilled Forks, Pockets accept 120mm x 50mm Forks (Note: Requires LOLER Inspection Prior to Use)

A SCHULTZ 1000-Litre IBC with Cage and Tap

A Pallet of Assorted CASCADE Mounting Groups, Hooks and Blocks (As Lotted)

A Pallet of CASCADE Gearboxes, Hydraulic Motors and Control Valves (As Lotted)

A Pallet of Assorted CASCADE Parts including Hydraulic Valves, Valve Blocks, Seals, etc. (As Lotted)

A Pallet of CASCADE Gearboxes and Gearbox Components, Hydraulic Motors, Hydraulic Rotary Groups, Valve Bodies, etc (As Lotted)

A Pallet of Unused CASCADE Parts (all P/N Identified) including Hydraulic Valve Blocks, Seal Kits Bearings, QR Hooks, Pins, Bushes, etc (As Lotted)