RHF Fan, model RDCW 340 RS with 0.55kw direct drive, vendors comments/condition report - will move 1000cfm at 1.25" wg. This was sucking dust from...

Euroventilatore TRC 1401 Centrifugal Fan, built in 2008. The fan has a 90kw vee belt drive, a GreCon spark detecting sensor and explosion panel. F...

Eurotech High Level Palletiser, model ET-PTR 800-MC for pallets up to 1200mm x 1200mm stacked to 2.0M high. Built in 2010. The palletiser comes wi...

Part worn 8mm die x 100mm thick, for CPM 7930-4 pellet press, vendors comments/condition report - good condition, loaded FOC yes, located Selby (V...

Refurbished 6mm die x 90mm thick for CPM 7930-4 pellet press, vendors comments/condition report - good condition, loaded FOC yes, located Selby (V...

Refurbished 6mm die x 95mm thick for CPM 7930-4 pellet press, vendors comments/ condition report - good condition, loaded FOC yes, located Selby (...

Tekpro Pellet Hardness Tester, type NHP100, built 2010, vendors comments/ condition report - good condition, loaded FOC yes, located Selby (V37457...

Young Massa DC12 Drop Through Rotary Valve, 300mm dia. 360mm wide x 500mm deep with drive, vendors comments/ condition report - good condition, lo...

Young Massa Motorised Double Flap Drop Through Valve, vendors comments/ condition report - this acts like a rotary valve but can handle lumpy and ...

Galvanised Dust Storage Silo, constructed from smooth flanged panels, this silo is 4.0m dia. for 9.0m and then the walls slope out over a height o...

Big Bag Emptying Frame, with hopper and outlet slide, the unit is 1.38m x 1.38m x 4.1m high when fully extended. Height can be reduced in incremen...

Provenair Galvanised Filter Cages, approx. 140mm dia. x 600mm long. There are about 160 available including many top units with flange and clip. T...

Tapered Twin Screw Discharger, 2 x 150mm dia., 1.7m long with 1.25m long inlet but no drive, vendors comments/ condition report - average conditio...

Ribbon Flighted 2 x 200mm Dia. Twin Screw Discharger, with central outlet and side mounted drive, overall length with guards is 1.94m and open are...

Cyclone In Framework, approx. dimensions of cyclone 900mm dia., 900mm vertical body, 1300mm deep cone and scrolled left hand entry. There is a 350...

Mild Steel Silos, 3.5m inside dia. with insulation and corrugated aluminium cladding. The silos are 12.83m overall high giving working volume of a...

Mild Steel Silos, 3.5m inside dia. with insulation and corrugated aluminium cladding. The silos are 12.83m overall high giving working volume of a...

Mild Steel Silos, 3.5m inside dia. with insulation and corrugated aluminium cladding. The silos are 12.83m overall high giving working volume of a...

Mild Steel Silo, 3.5m inside dia. with insulation and corrugated aluminium cladding. The silo is 10.83m, giving working volumes of approximately 4...

Twin Chain Conveyor, with 400mm working width, 6.35m long and it has a 0.75kw drive and an inlet with feed control gate, vendors comments/ conditi...

Bank of 5 No Nikkiso Diaphragm Pumps, on a single base frame with some pipework. The arrangement was supplied by Adony Metering Pumps and comprise...

Plenty Size 3 Duplex Basket Filter, with 3in flanged ports, no baskets, no basket selection lever and one lid clamp is missing, vendors comments/ ...

Rowlands Bulk Storage Hopper, with painted steel hopper section and legs and galvanised body and top, the hopper is 3.08m x 2.45m x 11.11m high. T...

Reconditioned Locker Rotex Model 21A Screen, with two decks, nominal area per surface 2.16 m2. It has a 1.1kw 1440rpm 3ph drive. Principal dimensi...

Stainless Steel Hopper, in mild steel frame. Overall dimensions 1.47m x 1.73m x 2.6m high. The stainless steel hopper is open topped and has a 900...

Wenger Extrusion Dryer/Cooler. The dryer is 12.75m long x 3.5m wide x 4.8m high including support frames. Model - 41001-000 Serial no. - 8706-8958...

G B Process Systems Extrusion Dryer/Cooler, built in 2014, 9.45M long x 2.85M wide x 4.7M high including support frames. It has 3 No LPG burners. ...

Fully Refurbished Wenger 165 Long Barrel Extruder, with 160kw motor and vee belt drive. The extruder comes with a Wenger stainless steel live bin ...

Taurus Hammer Mill, model VM55 with a 55kw direct drive. This mill has a horizontal rotor and screen and a vertical motor. It has two inlets each ...

Wynveen DPMA 700 High Speed Twin Paddle Mixer, in stainless steel with pneumatic bomb door discharge and 7.5kw chain drive. The mixer was built in...

Bullet Magnet, in stainless steel case with approx. 210mm dia. inlet and outlet. Door mounted magnet in 320mm dia. case. Overall height 810mm, ven...

Bullet Magnet, in stainless steel case with approx. 210mm dia. inlet and outlet. Door mounted magnet in 320mm dia. case. Overall height 810mm, ven...

Roller Mill, believed to be Prokop MS22 grain cracking roller mill with fluted rolls and two drives which look to be around 15kw each. The rolls r...

Vertical Air Receiver, on legs, 800mm dia. x 2500mm high. 1000 litre volume, 11bar working pressure, built 2000, vendors comments/ condition repor...

Kaeser HPC Model BSD 81T Package Air Compressor Set, in acoustic enclosure. Needs overhauling, vendors comments/ condition report - poor condition...

100mm Chain & Flight Conveyor, 5m long with a body depth of 450mm and an intake hopper 3m long x 100m deep. Geared drive projects 600m to one side...

PAM Blower, with 18.5kw drive, Serial no. 972321, vendors comments/ condition report - believed 1997 vintage, average condition, loaded FOC yes, l...

Guttridge Twin Chain Conveyor, with a working width of 660mm and an overall length of 11.0m and a 4.0 kw drive. Throughput up to 300 M3/hr, vendor...

Guttridge Twin Chain Conveyor, with a working width of 660mm and an overall length of 19.76m and a 5.5 kw drive. Throughput up to 300 M3/hr, vendo...

Guttridge Twin Chain Conveyor, with a working width of 660mm and an overall length of 10.55m and a 4.0 kw drive, throughput up to 300 M3/hr, vendo...

Twin Chain Conveyor, with 200mm working width x 3.5m long. No top covers, no chain body has been repaired but drive is complete, vendors comments/...

Twin Chain Conveyor, with 300mm working width x 4.2m long with rotation sensor and side inlets, vendors comments/ condition report - poor conditio...

U-Trough Screw Conveyor, 250mm dia. x 2.2M long with 1.5kw geared drive. No end plate or bearing, vendors comments/ condition report -likely to ha...

320mm dia. x 2m long U trough Screw Conveyor, with in-line drive requiring another 780mm in length, vendors comments/ condition report - some dama...

Taurus 120mm dia. x 1.1m long U trough Screw Conveyor, with side mounted geared drive that projects 300mm from body, vendors comments/ condition r...

Taurus 120mm dia. x 1.1m long U trough Screw Conveyor, with side mounted geared drive that projects 300mm from body, vendors comments/ condition r...

Taurus 120mm dia. x 1.1m long U trough Screw Conveyor, with side mounted geared drive that projects 300mm from body, vendors comments/ condition r...

Taurus 120mm dia. x 1.1m long U trough Screw Conveyor, with side mounted geared drive that projects 300mm from body, vendors comments/ condition r...

Sturtevant type Six Stage Vacuum Pump, less motor and heavy duty air receiver with filter bags. It needs pipework, valves and a rotary valve below...

Mild Steel Cyclone, in support frame with rotary valve on the discharge. Frame is 2.04m x 2.04m x 5.82m high and overall height with cyclone is 7....

Stainless Steel Cyclone, split in two sections, no support frame no rotary valve on outlet. 1.7m dia. with 1.24m vertical and 3.0m deep cone with ...

Stainless steel cyclone in mild steel support frame with rotary valve on the discharge. Frame is 2.0m x 2.0m x 5.8m high and overall height with c...

DCE Dalamatic Reversejet Insertable Filter, model DLM V/6F with 1.1kw fan and 6 M2 filter area. Needs to be reassembled and have new bags fitted, ...

Filtex Model 284 Type H, with base, bucket and explosion panel but no controller. Needs overhaul and new bags, vendors comments/ condition report ...

Large Extruder Control Panel, full of electrical contractors and an Alan Bradley PLC with touch screen, vendors comments/ condition report - avera...

ABB 315kw 1485 rpm Electric Motor, built 2005, model M3BP 315LKC 4B3. 415V 3 Phase 50 Hz. Foot mounted TEFC, vendors comments/ condition report - ...

Amtec 90 kw 2970 rpm foot mounted TEFC motor, vendors comments/ condition report - fan damaged and fan cover missing, average condition, loaded FO...

160kw Electric Motor, 1486rpm foot mounted, TEFC, 3 phase, 380V, 50Hz, frame size Y315L 1-4, vendors comments/ condition report - made in China, g...

Carier 9ST Belt & Bucket Elevator, 8.23m high with drive but no belt or buckets, vendors comments/ condition report - average condition, loaded FO...

Carier 9ST Belt & Bucket Elevator, 10m high, vendors comments/ condition report - with drive but no belt or buckets, average condition, loaded FOC...